500GPM 120 PSI electric vertical turbine pump ready to package

Those pictures display OTS series electric motor pump. OTS double suction split-case centrifugal pump has a wide range of performance, with the ability for a variety of uses.

Suitable for use with clean water. For Fire hydrant water supply, sprinkler system, fire system voltage regulator

The air conditioning circulation pump, also known as a chilled water pump, is a vital component of air conditioning systems used for circulating refrigerant or chilled water. It plays a crucial role in heat exchange and temperature regulation. The pump consists of an electric motor, pump body, impeller, sealing device, and control system. It enables the circulation of the refrigerant or chilled water to absorb or release heat, thereby achieving the desired cooling effect and regulating indoor temperatures. Key features of air conditioning pumps include high efficiency, control and automation capabilities, and diverse options to suit different system requirements. The selection of an appropriate air conditioning pump should consider specific system needs, flow rates, head pressures, and mediums. Consulting with professionals and adhering to maintenance guidelines ensures the safe and reliable operation of the pump within air conditioning systems.

The end suction pump works by rotating the impeller to make the water centrifugally move. Before starting the centrifugal pump, it is necessary to fill the pump casing and the suction pipe with water, and then start the motor to make the pump shaft drive the impeller and the water to rotate at a high speed. It flows into the pressurized water pipeline of the single-suction pump. According to the material type and the different configurations of the sealing system and cooling system, the single-stage single-suction pump has a wide range of applications. The end suction pump can pump clear water media, and can be used in air conditioning, heating, pressurization, building water supply, fire protection buildings, etc. It can pump chemical media similar to water and other corrosive liquid media, and can be used in chemical, horizontal, pharmaceutical, metallurgy, petroleum and other fields.

The OTS Split Case centrifugal pump is a widely used centrifugal pump in industrial and water supply systems. It features a double-suction design with two suction inlets on either side of the pump. This pump offers high efficiency, stability, and reliability due to its rational design and advanced fluid dynamics principles. It can handle large flow rates and high heads, making it suitable for various applications.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others. In conclusion, ISO end-suction pumps are reliable and efficient industrial pumps that meet global standards, making them suitable for various industries and applications.

End-suction centrifugal pump is a non-self-priming, single-pole single-suction, pump body and base fixed, its maximum working flow can reach 1200 cubic meters per hour, so this series of pumps fully meet the needs of fire water supply, can improve its extinguishing speed. The mechanical seal of this series adopts the standard wear-resistant mechanical seal, and the bearing adopts the bearing frame, which can locate the bearing, avoid the serial movement of the bearing, and at the same time improve the rigidity of the rotor parts, so this series of pumps use The lifespan will also be longer. At the same time, this series of water pumps also have the functions of stable operation, convenient maintenance and low operating noise, so this series of water pumps is the first of the fire system equipment.

Sewage pump is a kind of non-clogging pump, with many forms: such as submersible and dry type, dry type sewage pump with cam rotor, mainly used to transport urban sewage, feces or liquid containing fiber, paper scraps For mediums such as solid particles, the temperature of the medium to be conveyed is usually not greater than 80 ¡ãC. Because the conveyed medium contains fibers that are easily entangled or bunched. Therefore, the flow passage of this kind of pump is easy to be blocked. Once the pump is blocked, the pump will not work normally, and even the motor will be burned, resulting in poor sewage discharge. It has a serious impact on urban life and environmental protection. Therefore, blocking resistance and reliability are important factors for the quality of sewage sewage pump.

Capacity: Q = 5~1800m3/h
Total head: H = 20~234m
Speed: n = 2940~980 r/min

This series of pumps adopts a vertical structure, which can better save the floor space, has the characteristics of high efficiency, wide application range, flexible installation forms and convenient maintenance.

The electric diaphragm pump is a reliable and efficient industrial pump powered by an electric motor. It uses diaphragms to move liquids, making it suitable for handling various fluids, including clear water, chemicals, corrosive liquids, viscous substances, and particle suspensions. With its compact size and lightweight design, the pump is easy to install and maintain. It finds extensive use in industries such as chemical, petroleum, food and beverage, paper-making, and environmental protection. The pump’s leak-free and eco-friendly operation ensures safe and sustainable fluid handling processes. Its versatility, efficiency, and reliability make it an ideal choice for fluid transportation in various industrial applications.

The air conditioning circulation pump, also known as a chilled water pump, is a vital component of air conditioning systems used for circulating refrigerant or chilled water. It plays a crucial role in heat exchange and temperature regulation. The pump consists of an electric motor, pump body, impeller, sealing device, and control system. It enables the circulation of the refrigerant or chilled water to absorb or release heat, thereby achieving the desired cooling effect and regulating indoor temperatures. Key features of air conditioning pumps include high efficiency, control and automation capabilities, and diverse options to suit different system requirements. The selection of an appropriate air conditioning pump should consider specific system needs, flow rates, head pressures, and mediums.

Features:
* Automatic start:After receiving the start signal, the diesel pump unit can start automatically and put
into full load operation within 5-15 seconds.
* Automatic charging: Batteries can be automatically charged by charging motors of municipal or
diesel engines to ensure the smooth start of the unit.
* Automatic alarm:Automatic alarm and protection for diesel engine faults such as low oil pressure
and high water temperature, alarm and stop at super speed.
* Reliable and Economic:It can run in the condition of power cut,no electricity charge.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

Compared with other pumps of the same type, OTS horizontal split pump has the characteristics of long service life, high efficiency, reasonable structure, low operating cost, convenient installation and maintenance, etc. it is an ideal pump for fire fighting, air conditioning, chemical industry, sewage treatment and other industries.

CDL is higher than human was finished for shipment in factory

Two electric pumps(one duty and one standby) and a Jockey pump.also fesaible foe places where power supply is table or where there self-allocated generators
Electric pumps can use vertical in-line pumps,horizontal end-suction pumps,vertical multi-stage pumps,horizontal multi-stage pumps,split casing pumps and so on according to the different flow andhead of customers.

The OTS Double-suction Split-case centrifugal pump is a widely used centrifugal pump in industrial and water supply systems. It features a double-suction design with two suction inlets on either side of the pump. This pump offers high efficiency, stability, and reliability due to its rational design and advanced fluid dynamics principles. It can handle large flow rates and high heads, making it suitable for various applications. The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.

WXZQ series fire-fighting stabilized pressure water supply equipment is based on GB27898.3-2011 fixed fire water supply equipment, Part 3: fire-fighting pressurized stabilized pressure water supply equipment. It fully absorbs the latest achievements and experience of air pressure water supply technology in recent years in terms of technology and selection methods of parts. It is a new type of ideal fire-fighting water supply equipment.

Horizontal single-stage electric fire pumps are widely used, such as family houses, hotels, office buildings, hospitals, etc. Of course, different types of single-stage electric fire pumps can be used in different places of use.

Flow: 1~300L/s
Head:15~160m
Speed: 960~2900rpm

The G Single Screw Pump is a versatile positive displacement pump designed for the transportation of high-viscosity liquids. Featuring inter-meshing screws within the pump body, it creates continuous sealed chambers for efficient fluid movement. This pump finds widespread application in industries such as chemical, petroleum, food, and pharmaceuticals, where it excels at conveying high-viscosity, high-temperature, abrasive, or corrosive liquids. Its advantages lie in high-precision conveying, excellent self-priming capabilities, wide applicability, corrosion resistance, and low noise operation. The G Single Screw Pump offers a reliable and efficient solution for industrial liquid transportation needs.

Series OTS pumps are single stage,double suction with horizontally split casings .They are suitable pumping unsettled water, clean water ,non-drinkable or hydrocarbon at a temperature not exceeded 105¡æ.
They are adoptable in water works irrigation and drainage pumping stations,fire fighting systems, marine applications as well as refinery industry,etc.

APPLICATION RANGE:
Capacity: Approx 75- 22000 m3 /hr.
Total head: Approx 10-220 m.
Liquid: Fresh water/ Industries/River water/Sea water/Brine/Paper stock Hydro-carbon etc.

The XBD-W horizontal type single stage single suction fire extinguishing pump group, not is similar for the transportation including solid particle’s clear water and the physico-chemical properties to water liquid, mainly uses in the fire prevention system pipeline turbo-charged supplying water, also suitably gives draining water in the industry and the city, the high-rise construction turbo-charged supplies water, the long-distance range to supply water, the heating, the bathroom, the boiler changes in temperature water cycle, the turbo-charged air conditioning refrigeration system to supply water and the equipment necessary and so on situations. This department produces XBD-W fire extinguishing pump group its performance, the engineering factor conform to national new promulgation GB6245-1998 “Fire extinguishing pump Performance requirement And Testing method” the standard request, the product examine the central test after the national fire prevention equipment quality surveillance to be qualified, obtain the Shanghai fire prevention product approval certificate.

The submersible axial-flow pump is a special type of submersible pump designed for handling large flow rates with relatively low head conditions. It has a wide range of applications, including agricultural irrigation, urban water supply and drainage, municipal flood control and emergency rescue, as well as various water conservancy projects.The main feature of the submersible axial flow pump lies in its innovative design, enabling efficient operation under high flow rate conditions. Compared to conventional submersible pumps, it operates at relatively lower head conditions, making it more suitable for transporting water over long distances with moderate elevation changes. Due to its versatility, the submersible axial-flow pump has become an indispensable piece of equipment in agriculture, urban drainage systems, and various water conservancy projects, especially in applications requiring the handling of large-scale water flow.

The XBD-DL vertical multistage fire pump is a top-tier technology designed to enhance the safety and efficiency of building fire protection systems. With advanced design and technology, this pump offers excellent corrosion resistance and durability, making it suitable for various environmental conditions. Its high-performance turbine blade design and efficient motor ensure powerful water pressure and flow, enabling rapid and effective water delivery. The intelligent monitoring system and fault alarm function enhance the pump’s reliability and availability.

It shows details of electric vertical turbine pump that has high efficiency. Type JC pumps are used for pumping normal temperature water and warm water under 100°C from wells, river, lake, sea.

The electric diaphragm pump is a reliable and efficient industrial pump powered by an electric motor. It uses diaphragms to move liquids, making it suitable for handling various fluids, including clear water, chemicals, corrosive liquids, viscous substances, and particle suspensions. With its compact size and lightweight design, the pump is easy to install and maintain. It finds extensive use in industries such as chemical, petroleum, food and beverage, paper-making, and environmental protection. The pump’s leak-free and eco-friendly operation ensures safe and sustainable fluid handling processes. Its versatility, efficiency, and reliability make it an ideal choice for fluid transportation in various industrial applications.

An FDC is an external connection point that allows the fire department to supplement the water supply to the fire protection system using their hoses and equipment if needed.

Flow：250-10000 GPM
Head：30-160 m 3-16 Bar 40-232 psi
Power：11-1000 kw
Caliber：25-500 mm
Frequency：50 or 60 Hz
Working Pressure：≤2.5 MPa
The split-case structure allows for easy maintenance, and its wide pump range ensures compatibility with different operating conditions. The OTS pump finds application in water supply, cooling systems, industrial processes, and fire protection systems, providing reliable performance for handling different liquid media.