Conditions of using explosion-proof submersible sewage pump

YCB series multistage centrifugal oil pump is used mainly for petroleum refining, petrochemical and chemical industries to transport the petroleum-containing no solid grains, liquefied petroleum gas, other petroleum products, high-temperature high pressure, combustible and explosive liquids.This horizontal oil pump is an electric pump with explosion-proof device, which can be customized.

◆The temperature of the medium should not exceed 60℃, the weight of the medium should be 1-1.3kg/dm3, and the PH value should be in the range of 5-9.
◆For pumps without internal gravity circulation cooling system, the exposed liquid level of the motor part should not exceed 1/2.
◆The material of the main parts of this pump is cast iron, so it cannot be used for pumping highly corrosive liquids. If the conveying medium is corrosive, please choose a stainless steel submersible pump. If you also need an explosion-proof submersible pump, you must choose a stainless steel explosion-proof submersible pump.

Submersible sewage pump is suitable for conveying sewage and dirt with particles in chemical industry, petroleum industry, pharmaceutical industry, mining industry, paper industry, cement plant, steel plant, power plant, coal processing industry, urban sewage treatment plant drainage system, municipal engineering, construction site and other industries. It can also be used for pumping clean water and corrosive media.

APPLICATIONS：
Water works:
Water intake/Water supply/Booster
Industrial use:
Water intake/Water supply/Booster/Circulation/Drainage/Chemical/Re-finery/Firefighting/Sea water desalination,
Agricultural use:
Irrigation and Drainage

Centrifugal pump is designed according to the principle of centrifugal force. The high-speed rotating impeller blade drives the water to rotate and the water is thrown out, so as to achieve the purpose of transportation

Use sanitary cleaning, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient maintenance, reliable sealing performance

XA Bare Shaft Pump under painting
XA100/32,XA100/20,XA100/26

Product Introduction of
ZX series self-suction pump is an energy saving pump designed with ISO international standard and developed through absorbing and improving the r elated technical data both at home and abroad and belongs to the self-suction centrifugal pump and uses the mechanical seal of a ceramic ring so as to resist any sandy liquid to go into the sealing face, preventing it from getting scratched. This pump holds the advantages of a compact structure, easy operation, stable movement, easy maintenance, high efficiency, long duration and strong self-suction capacity and, as no foot valve is needed to be mounted on the pipeline and only a certain amount of leading liquid is required to be filled into the pump before work, improves the work condition while simplifying the pipeline system.

Oil-water separation device is a device that separates oil and water. The oil-water separation device is one of the important environmental protection facilities in the sewage treatment plant. Its function is to improve the biodegradability of sewage and reduce the energy consumption and treatment cost of sewage treatment.

These photos show some of the motors used in exhibitions. Our company’s ordinary motor products include Low voltage motor, Low-voltage variable frequency speed control motor, Compact low voltage high power motor, High voltage motor, High voltage motor, High voltage compact motor, Low-voltage flameproof motor, Low-voltage flameproof type variable frequency speed regulating motor, Low-pressure dust explosion-proof motor.

The integrated prefabricated pumping station is the lifting equipment for lifting sewage, rainwater, drinking water and waste water.

Centrifugal pumps are the most widely used pumps in a chemical industry and refineries. They are used to transport wide variety of liquids and slurries like water, hydrocarbons, in-organic chemicals etc.

The automatic water supply equipment automatically adjusts the number of running water pumps and the speed of a water pump according to the change of the user’s water consumption, so that the outlet pressure of the water pump remains constant.

The Fire Pressure Stabilization Equipment, coupled with the CDL Vertical Multistage Fire Pump, offers a comprehensive solution to elevate fire safety measures. This powerful combination ensures a consistent water pressure for effective fire suppression. By incorporating pressure stabilization technology, this system guarantees an uninterrupted fire water supply, efficient water distribution, and reliable operation of fire hydrants and sprinkler systems. With advanced infrastructure and the ability to maximize firefighting capabilities, this configuration significantly enhances overall fire safety standards. Investing in fire pressure stabilization equipment is a proactive step towards ensuring superior fire protection and providing peace of mind in critical situations.

1. In the rural areas is mainly used as feces, mud and water, feed slurry pumping and pouring, instead of shoulder, and for flood, drought resistance, mud manure production can also simple flow fire pump in countryside.
2. Used in municipal engineering, chemical industry, printing and dyeing, pharmaceutical, shipbuilding, foundry, food and other industry suction thick liquid, dirty liquid, paste , flow sand and urban river flow sludge etc. can also be used in coal mines exclude fluid containing small mud gravel.
3. If with high pressure pump and water gun, the composition of hydraulic mechanized earthmoving machine, available in the formation of land, river and pond dredging, drilling and other small-scale water conservancy projects of excavation and transportation, and urban air defense engineering, underground engineering.
4. Fish used as a water pond, fish pond oxygen etc..

Filter is an indispensable device on the transmission medium pipeline, usually installed in the pressure reducing valve, pressure relief valve, fixed water level valve, square filter other equipment import end equipment.

An “air conditioner pump” is not a common term in the context of air conditioning systems. However, it’s possible that you might be referring to one of the components or aspects related to air conditioning systems. Let me provide some information on components that could be related to what you’re asking:

Hygienic and clean to use, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient use and maintenance, reliable sealing performance

The constant pressure variable frequency water supply equipment is an advanced system designed to maintain stable water pressure while ensuring energy-efficient water supply. It utilizes variable frequency technology and an intelligent control system to dynamically adjust pump speed and water pressure based on real-time water demand. This eliminates energy wastage caused by frequent start-stop cycles in traditional systems, providing users with a constant water pressure supply for stable and reliable water distribution during peak and off-peak periods. The equipment’s intelligent control system enables remote monitoring and automatic alarms, improving operational reliability and maintenance efficiency. Widely applied in industrial, construction, agricultural, and municipal sectors, this energy-efficient solution optimizes water supply systems to meet diverse user demands effectively.

For end suction pumps and since water is entering one side of the impeller, and due to the design of “Impeller overhung”, these pumps cannot be used for large water flow applications and usually not exceeding 1500 gpm of flow.

XBD series fire pumps are mainly used for the fixed fire hydrant firesystem, automatic spraying fire system used by all sorts of organs, projects, high-floor buildings etc. and can be trans ferred with the clear water without solid grain under 100 – ℃ or its equivalence, also be used for public-used water providing system for fire, living, production, construction and municipality.

The vertical turbine fire pump is circulating water pump, and its over-flow medium is sea water. The function is to provide flushing water for the drum-type rotating filter to ensure that impurities and sea creatures can be washed away in time, thus bring clean seawater downstream. It can use with electric motor and also diesel engine.

The horizontal mixed-flow pump is a kind of shell type single suction pump with one impeller. The reasonable structure makes for reliable operation, convenient maintenance, high efficiency, small volume and light weight.

High efficiency, flat performance curve, wide operating range, in line with the relevant regulations of the fire department, and can meet the needs of different users
Adopt segmented structure, stable operation, low noise, long service life, small footprint, easy installation and maintenance

The suction and discharge ports of the GDL vertical multistage pipeline centrifugal pump are located on the same straight line. The rotor part is composed of shaft, impeller, impeller retaining sleeve, shaft sleeve and other parts, and the water inlet section, middle section and water outlet section are connected by tension bolts. The shaft seal adopts a mechanical seal, lubricated and cooled by the pressure water in the balance chamber. It is an ideal pump type for the transportation of hot and cold water or liquids with similar physical and chemical properties to water in various industries.

While the initial investment in firefighting pumps and fire protection infrastructure may represent a significant capital expenditure, the long-term benefits of enhanced fire safety, reduced property damage, and potential savings in insurance premiums outweigh the costs. Cost-benefit analyses and risk assessments help stakeholders make informed decisions about allocating resources to improve fire protection capabilities and mitigate financial risks associated with fire emergencies.

The Portable Irrigation Pump is a portable and user-friendly tool used primarily by farmers and gardening enthusiasts for small-scale irrigation in fields, vegetable gardens, and flower beds. With its manual operation, this pump requires no external power source, making it suitable for remote areas lacking electricity or other energy supplies. Comprising a handle and a suction pipe, users can easily draw water from the source through reciprocating motion, delivering it efficiently to the roots of crops or plants for effective irrigation. Being both economical and eco-friendly, the Portable Irrigation Pump offers a reliable and convenient solution, particularly in areas with limited resources and where other irrigation equipment may not be available.

High efficiency, flat performance curve, wide operating range, in line with the relevant regulations of the fire department, and can meet the needs of different users
Adopt segmented structure, stable operation, low noise, long service life, small footprint, easy installation and maintenance

1. The pump is a vertical structure, the inlet and outlet diameters are the same, and they are located on the same center line. It can be installed in the pipeline like a valve. The appearance is compact and beautiful, the floor space is small, and the construction investment is low. Can be used outdoors.
2. The impeller is directly installed on the elongated shaft of the motor, the axial dimension is short, the structure is compact, and the pump and motor bearings are reasonably arranged, which can effectively balance the radial and axial loads generated by the operation of the pump, thereby ensuring the smooth operation of the pump. Low vibration and low noise.
3. The shaft seal adopts mechanical seal or mechanical seal combination, adopts imported titanium alloy sealing ring, medium-sized high temperature resistant mechanical seal and hard alloy material, wear-resistant seal, which can effectively prolong the service life of mechanical seal.
4. Easy installation and maintenance, no need to dismantle the pipeline system, just remove the pump joint seat nut to extract all the rotor parts.
5. The series and parallel operation modes of pumps can be adopted according to the requirements of use, that is, the needs of flow and head.
6. The vertical and horizontal installation of the pump can be adopted according to the requirements of the pipeline arrangement.

. The rotor part is composed of shaft, impeller, impeller retaining sleeve, shaft sleeve and other parts, and the water inlet section, middle section and water outlet section are connected by tension bolts. The shaft seal adopts a mechanical seal, lubricated and cooled by the pressure water in the balance chamber.