Electric fire pump is applied to various water environments

The Horizontal Multistage Pump is an exceptional engineering solution that offers high performance and reliability for fluid handling applications. With its unique multistage impeller design, it delivers efficient and incremental pressure boosting for high-pressure and high-flow scenarios. Whether used in water supply systems, industrial processes, irrigation, or building cooling, this pump ensures stable water pressure and flow.

The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing. The XA pump is capable of handling different fluid mediums and provides efficient flow control. Its operating principle utilizes centrifugal force to draw in and propel fluids through the pump. Overall, the XA single-stage centrifugal pump is a reliable and efficient solution for fluid pumping needs in industrial settings.

Flow：500 GPM
Head：9 bar
ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.

Multistage pumps are used for feeding low and middle pressure boiler water or for pumping other middle pressure water. The temperature of pumped medium are not more than 110℃.
This pumps are horizontal single-suction centrifugal pump with ring section body. The position of suction port is arranged horizontal and is vertically up.
The position of discharge port is arranged vertically up.
The shaft sealing of these pumps are sealed with soft-packing. At the location of the shaft sealing, there is a renewable sleeve to protect the shaft.
The pumps are directly driven by the motor through the flexible coupling.
The rotating directions of the pumps are clockwise, when viewed pump from the driving end.

Flow：50-5000 GPM
Head：3-16 Bar
The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing.

The IS series single-stage centrifugal pump is a reliable and versatile solution for fluid transfer applications. Known for its simplicity and ease of use, this horizontal centrifugal pump is designed to efficiently transport clear water and fluids with similar properties. With a compact structure and convenient maintenance, the IS pump offers stable and low-noise operation, making it suitable for a wide range of industrial, agricultural, and municipal tasks. Whether it’s for industrial cooling systems, municipal water supply, agricultural irrigation, or firefighting applications, the IS single-stage centrifugal pump provides efficient and dependable liquid handling. Its durable construction and corrosion-resistant materials ensure long-lasting performance.

A split pump is a centrifugal pump with two single-suction impellers or a double-suction impeller supported between bearings. The housing is axially separated from opposing suction and discharge flanges. This facilitates maintenance of the pump. This robust and simple design is especially suitable for high flow applications.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing. The XA pump is capable of handling different fluid mediums and provides efficient flow control. Its operating principle utilizes centrifugal force to draw in and propel fluids through the pump. Overall, the XA single-stage centrifugal pump is a reliable and efficient solution for fluid pumping needs in industrial settings.

Horizontal single-stage electric fire pumps are widely used, such as family houses, hotels, office buildings, hospitals, etc. Of course, different types of single-stage electric fire pumps can be used in different places of use.

Electric fire pump has the characteristics of high efficiency and energy saving, low noise, high temperature resistance, low vibration and so on. The installation form is flexible and diverse, and the inspection is convenient.

Before start:

Turning the clutch by hand, there should be no jammedphenomenon at the turner position.
Opening the inlet valve and the vent valve, letting the waterfill into the pump’s chamber, then closing the vent valve.
Clicking the switch of motor, and confirming whether theturning is right or not.

Running:

Fully opening the inlet valves, and closing the valves of theoutlet pipe.
Connecting the power, Opening the valves of the outlet pipeand adjusting the needed working point when the turning velocityis normal.
Watching whether there exist abnormities or not, if yes,should the pump be stopped and inspected before re-running.

Stop:

After turning off the outlet valves one by one, shutting offthe power.
Shutting off the inlet valves.
If the ambient temperature is below 0 , some warm-℃keeping measures should be adopted.

Horizontal fire pumps have a wide range of applications and are suitable for the supply and extraction of various fire water sources, including tap water, reservoirs, reservoirs, etc. In terms of building fire protection, horizontal fire pumps can be used in fire extinguishing water systems, sprinkler water systems and foam fire extinguishing systems. In terms of industrial fire protection, horizontal fire pumps can be used in railway stations, ports, chemical plants and other places. In addition, horizontal fire pumps can also be used for rural fire protection, such as fire protection propaganda, drought resistance irrigation, flood control and disaster relief, etc.

Horizontal fire pumps are designed according to the principle of centrifugal force. The high-speed rotating impeller blades drive the water to rotate and throw it out, so as to achieve the purpose of transportation. There are many kinds of centrifugal pumps, which can be divided into civil pumps and industrial pumps in use; from the perspective of conveying media, they can be divided into clean water pumps, impurity pumps, corrosion-resistant pumps, etc.

The XBD-DL vertical multistage fire pump is a top-tier technology designed to enhance the safety and efficiency of building fire protection systems. With advanced design and technology, this pump offers excellent corrosion resistance and durability, making it suitable for various environmental conditions. Its high-performance turbine blade design and efficient motor ensure powerful water pressure and flow, enabling rapid and effective water delivery. The intelligent monitoring system and fault alarm function enhance the pump’s reliability and availability. By choosing the XBD-DL vertical multistage fire pump, you gain an innovative and efficient solution to enhance the safety and efficiency of your fire protection system.

The vertical turbine pump is a vertical pump composed of single or multiple centrifugal or mixed-flow impellers, guide casing, riser pipe, transmission shaft, pump base, motor and other components. The pump base and the motor are located on the upper part of the wellhead (or pool), and the power of the motor is transmitted to the impeller shaft through the transmission shaft concentric with the water pipe, driving the impeller to generate flow and lift.

The air conditioning circulation pump, also known as a chilled water pump, is a vital component of air conditioning systems used for circulating refrigerant or chilled water. It plays a crucial role in heat exchange and temperature regulation. The pump consists of an electric motor, pump body, impeller, sealing device, and control system. It enables the circulation of the refrigerant or chilled water to absorb or release heat, thereby achieving the desired cooling effect and regulating indoor temperatures. Key features of air conditioning pumps include high efficiency, control and automation capabilities, and diverse options to suit different system requirements. The selection of an appropriate air conditioning pump should consider specific system needs, flow rates, head pressures, and mediums.

1.Electric Fire Pump
XBD series fire pumps are a kind of new type fire products researched and developed in full compliance with the state issued newly standard of GB6245-2006 “Fire pump”, according to the end-user’s practical needs and special using requirements.
The inspection of the state fire equipment quality supervising center shows its all kinds of performance indexes are up to or over the standard’s requirements and it earned the certificate for fire state products.
2.Jockey Pump
Pump motor, pump head, guide vanes, impeller, pressure tube, and out of the water segment, the shaft, mechanical seal components.
Pump key parts guide vanes, impeller, pressure cylinders, shafts are made of stainless steel pump head, and out of the water segment: CDL, pump iron castings CDLF pump with stainless steel precision castings.
Pump shaft seal, single mechanical seal friction pair to support the use of alloy steel carbide / graphite, the guide vanes.
Pump and piping connection type for the circular flange connection, according to user need to use different connection methods.

ISO end-suction pumps offer high efficiency, high flow capacities, and the ability to withstand high pressures. The suction inlet is designed to efficiently intake fluids, while the pump itself is constructed to be compact, making it suitable for installation and maintenance in limited spaces.They also provide multiple material options to accommodate different fluid mediums, including corrosive and high-temperature substances. ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.

The XBD-DL vertical multistage fire pump is a top-tier technology designed to enhance the safety and efficiency of building fire protection systems. With advanced design and technology, this pump offers excellent corrosion resistance and durability, making it suitable for various environmental conditions. Its high-performance turbine blade design and efficient motor ensure powerful water pressure and flow, enabling rapid and effective water delivery. The intelligent monitoring system and fault alarm function enhance the pump’s reliability and availability. By choosing the XBD-DL vertical multistage fire pump, you gain an innovative and efficient solution to enhance the safety and efficiency of your fire protection system.

The split case pump is also known as a single-stage double-suction centrifugal pump, and its main feature is that the flow rate of the conveying medium is large. The working principle of the split pump operation: The impeller is installed in the pump casing and fastened to the pump shaft, which is directly driven by the motor. There is a liquid suction and suction pipe in the center of the pump casing. The liquid enters the pump through the bottom valve and suction pipe. The liquid discharge port on the pump casing is connected with the discharge pipe. When the speed of the pump is constant, its pressure head and flow rate are related to the diameter of the impeller.

The hot water pump is also a hot water pump product optimized on the basis of the ISG and ISW centrifugal pump series, especially the IRG hot water circulating pump has the largest consumption, because the pump adopts the vertical installation of the motor on the upper part, and the connection between the pump and the motor. There is also a short bracket in between, which will not cause the water in the motor to burn out the motor due to the leakage of the mechanical seal, and it can also be designed as a mechanical seal on the basis of the IRG hot water pump. The maximum temperature of high temperature pump products can reach 240 ¡ã C.

Equipment control function description
The equipment is designed to have one use and one standby function. The main pump runs
normally, and the standby pump starts automatically after the main pump fault .Control
cabinet with two start ways: remote start function and site start. (DC24V provided; Two
startup modes are available for users to select)
◆ Automatic start state
First, the switch to the “automatic” position, and then the remote startup instruction
sent. Upon receiving the startup instruction, it will immediately enter the running state, and
then the corresponding fire pump (jockey pump) indicator light on, the system will run the
main pump.Stop the running fire pump (jockey pump)remove the remote start instruction.
◆ Manual start state
First, put the switch to the “manual” position, press “fire pump start up” or “pressure
jockey pump start up” , then fire pump (jockey pump)operation indication lights on, then
enter the running state. When the fire pump (jockey pump) is running, press the “fire pump
stop or jockey pump stop button and the fire pump (jockey pump )stops running

Horizontal fire pumps have a wide range of applications and are suitable for the supply and extraction of various fire water sources, including tap water, reservoirs, reservoirs, etc. In terms of building fire protection, horizontal fire pumps can be used in fire extinguishing water systems, sprinkler water systems and foam fire extinguishing systems. In terms of industrial fire protection, horizontal fire pumps can be used in railway stations, ports, chemical plants and other places. In addition, horizontal fire pumps can also be used for rural fire protection, such as fire protection propaganda, drought resistance irrigation, flood control and disaster relief, etc.

Flow：50-7500 GPM
Head：3-20 Bar
The Vertical Turbine Fire Pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. It is a reliable solution for water supply, sewage treatment, and chemical processes.

Vertical turbine pump is a kind of centrifugal pump. From the perspective of centrifugal pump, it is improved from the performance of submerged pump. The pump can be used to transport rainwater, iron oxide water, sewage, corrosive Industrial wastewater, seawater and other liquids. Widely used in water companies, sewage treatment plants, steel plants, mines and other industrial and mining enterprises, as well as municipal water supply and drainage, farmland irrigation, flood control and drainage projects.

ISO end-suction pumps find wide application in industries such as chemical, petroleum, pharmaceutical, food and beverage, and water treatment, where they are used for fluid transportation, circulation systems, heating, and cooling systems, among others.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

ISO series centrifugal pump is a single-stage single-suction centrifugal pump developed by China Better Technology Co., Ltd. with reference to international similar products using modern fluid mechanics to meet the international standard ISO9908 secondary energy efficiency standard.

XA series single-stage centrifugal pump is the earliest single-stage single-suction centrifugal pump product launched by Better (China) Technology Co., Ltd.
This product combines the advantages of similar products in China and abroad, and is designed with excellent hydraulic model.
Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operation cost of pumps in various applications.