Horizontal multistage pump

The electric fire pump is mainly used for pressurizing water supply in the pipeline of the fire protection system. It can pressurize and supply water to the pipeline of the fire protection system in various occasions, such as in the fire hydrant fire extinguishing system, in the automatic sprinkler fire extinguishing system, and in the water spray fire extinguishing system. Pressurized water delivery is possible.

Flow: 30-5000 GPM
Head: 3-20.5BAR
Speed: 980~ 3550 r/min

Vertical turbine pumps are used to extract normal temperature water and warm water below 100¡ãC from wells, rivers, lakes and seas. It is more suitable for urban, factory sewage and water with high sand content in rivers and seas, and is widely used in factories and mines, cities and countries, planting and farmland irrigation. They are also used for groundwater supply in municipalities that do not depend on surface water.

Horizontal fire pumps have significant advantages such as high efficiency, low operating noise, good anti-cavitation performance, reasonable structure, and long service life. , Long-distance water delivery, heating, bathroom, boiler cold and warm water cycle pressurization, air conditioning and refrigeration system water delivery and equipment matching and other occasions.

Before start:

Turning the clutch by hand, there should be no jammedphenomenon at the turner position.
Opening the inlet valve and the vent valve, letting the waterfill into the pump’s chamber, then closing the vent valve.
Clicking the switch of motor, and confirming whether theturning is right or not.

Running:

Fully opening the inlet valves, and closing the valves of theoutlet pipe.
Connecting the power, Opening the valves of the outlet pipeand adjusting the needed working point when the turning velocityis normal.
Watching whether there exist abnormities or not, if yes,should the pump be stopped and inspected before re-running.

Stop:

After turning off the outlet valves one by one, shutting offthe power.
Shutting off the inlet valves.
If the ambient temperature is below 0 , some warm-℃keeping measures should be adopted.

Vertical turbine pump pacakge process
The vertical turbine pump is hot sale in Philippines makrket
It can save pump room area and use in port area
If any need can contact with us

The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing. The XA pump is capable of handling different fluid mediums and provides efficient flow control. Its operating principle utilizes centrifugal force to draw in and propel fluids through the pump. Overall, the XA single-stage centrifugal pump is a reliable and efficient solution for fluid pumping needs in industrial settings.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

Philippines order us the booster pump set
The booster pump set normal use for water supply system
Use CDL type pump, flow is not big, but pressure higher

This kind of electric fire pump set is used of OTS pump with high-voltage motor driven.

Flow：50-5000 GPM
Head：3-16 Bar
The XA single-stage centrifugal pump is a widely used industrial pump designed for fluid transportation and handling in various industries. It features a simple and compact design with a rotating impeller and a stationary pump casing. The pump offers high efficiency, reliability, and flexibility in installation. It finds applications in water treatment, agriculture, construction, petrochemicals, energy, pharmaceuticals, and food processing.

Single-suction pump, also known as end-suction pump, has the advantages of stable operation, simple structure, simple repair and maintenance, convenient installation and small footprint. The single-suction pump has low cost, reasonable price and wide application. The flow rate of the single-suction pump is smaller and the flow rate is equal. The volume of the single-suction pump is smaller, but the axial force is large and the bearing load is large.

Submersible sewage pump is a pump product used in the environmental protection industry to transport solid-liquid mixed liquids containing solid particles, fibers, etc., such as domestic sewage, industrial wastewater, mud, etc. WQ type submersible sewage pump is composed of sewage pump, sealing system, submersible motor, control and protection system, automatic installation system and so on. Different from the general sewage pump: in the WQ type submersible sewage pump, the pump and the motor rotate coaxially, and work underwater at the same time. The sealing system of the pump can effectively prevent the liquid from entering the motor cavity and protect the safe operation of the motor. The control and protection system enables the pump to alarm in time and shut down for repairs in the event of water leakage, oil leakage, overload, overheating, and lack of phase failure.

IS0 series single-stage centrifugal pump is a single-stage single-suction centrifugal pump product developed and designed by China Bede Technology Co., Ltd. with reference to similar international products and modern fluid mechanics to meet the international standard SO9908 second-level energy efficiency standard. The product integrates the advantages of similar products at home and abroad and adopts excellent hydraulic model to design. Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the pump operating cost in a variety of applications.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

WXZQ series fire-fighting stabilized pressure water supply equipment is based on GB27898.3-2011 fixed fire water supply equipment, Part 3: fire-fighting pressurized stabilized pressure water supply equipment. It fully absorbs the latest achievements and experience of air pressure water supply technology in recent years in terms of technology and selection methods of parts. It is a new type of ideal fire-fighting water supply equipment.

The vertical turbine pump can match the electric motor or diesel engine according to the head and flow parameters of the user. The vertical turbine pump is mainly used in clear water medium or liquid with physical and chemical properties similar to water, with stable performance and high working efficiency. The material selection of Better Technology Group Co., Ltd. is reasonable, the quality is stable, and the price is affordable.

Components
1. Electric pump:kinds of end suction pump, split case pump.
2. Jockey pump:vertical, small flow, head is higher than electric or diesel pump.
3. Control panel: control the pumps automatically with overload, overcurrent protection
4. Accessories: Discharge pipe with flange, Battery, Gate valve, Check valve, Flexible expansion joints, Pressure switches, Pressure gauge, base frame etc.

The end suction pump works by rotating the impeller to make the water centrifugally move. Before starting the centrifugal pump, it is necessary to fill the pump casing and the suction pipe with water, and then start the motor to make the pump shaft drive the impeller and the water to rotate at a high speed. It flows into the pressurized water pipeline of the single-suction pump. According to the material type and the different configurations of the sealing system and cooling system, the single-stage single-suction pump has a wide range of applications. The end suction pump can pump clear water media, and can be used in air conditioning, heating, pressurization, building water supply, fire protection buildings, etc. It can pump chemical media similar to water and other corrosive liquid media, and can be used in chemical, horizontal, pharmaceutical, metallurgy, petroleum and other fields.

The submersible axial-flow pump is a special type of submersible pump designed for handling large flow rates with relatively low head conditions. It has a wide range of applications, including agricultural irrigation, urban water supply and drainage, municipal flood control and emergency rescue, as well as various water conservancy projects.The main feature of the submersible axial flow pump lies in its innovative design, enabling efficient operation under high flow rate conditions. Compared to conventional submersible pumps, it operates at relatively lower head conditions, making it more suitable for transporting water over long distances with moderate elevation changes. Due to its versatility, the submersible axial-flow pump has become an indispensable piece of equipment in agriculture, urban drainage systems, and various water conservancy projects, especially in applications requiring the handling of large-scale water flow.

The XBD-L Vertical Single stage single suction fire pump is specifically designed for fixed fire protection systems in a wide range of settings, including businesses, construction projects, and high-rise buildings. It is a vital component in fire hydrant extinguishing systems, automatic sprinkler fire suppression systems, and more. This pump set is capable of delivering clear water and water-like media with physical and chemical properties similar to water, without solid particles, at temperatures below 100°C. It is also suitable for fire protection, domestic water supply, shared water supply systems, as well as building and municipal water supply and drainage applications.

1. Better is a professional fire pump manufacturer with 17 years of industry experience
2. Professional sales team and R&D team, strong technical skills, self-produced control system
3. The motor is self-produced and can produce 50/60HZ

Electric vertical turbine pump with high efficiency, energy saving and high efficiency, pump impeller immersed in water, no bottom valve, no irrigation and shaft vacuum, can be directly started, very convenient and reliable.

The long shaft pump is a high-performance engineering pump known for its unique long shaft design and exceptional capabilities. It offers advantages such as suitability for deep-buried pump stations, improved transmission efficiency, and reduced energy consumption. With excellent corrosion resistance and reliability, it can handle various fluids in diverse environments. The long shaft pump provides flexibility through customization options and multiple driving choices. It is a reliable solution for water supply, sewage treatment, and chemical processes. Choose the long shaft pump for reliable and efficient fluid handling in your engineering projects.

Flow：250-10000 GPM
Head：3-16 Bar
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants, oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

The air conditioning circulation pump, also known as a chilled water pump, is a vital component of air conditioning systems used for circulating refrigerant or chilled water. It plays a crucial role in heat exchange and temperature regulation. The pump consists of an electric motor, pump body, impeller, sealing device, and control system. It enables the circulation of the refrigerant or chilled water to absorb or release heat, thereby achieving the desired cooling effect and regulating indoor temperatures. Key features of air conditioning pumps include high efficiency, control and automation capabilities, and diverse options to suit different system requirements. The selection of an appropriate air conditioning pump should consider specific system needs, flow rates, head pressures, and mediums. Consulting with professionals and adhering to maintenance guidelines ensures the safe and reliable operation of the pump within air conditioning systems.

XBD fire pump compact structure, small volume, beautiful appearance, its structure determines the installation of small area, convenient installation and maintenance, no need to disassemble the pipeline system, pump inlet and outlet for the same caliber, simplifying the connection of the pipeline.

The electric motor fire pump is a relatively important water supply equipment in the fire protection system. The electric motor fire pump has a wide coverage of lift, flow and power, and can be used in many environments. Providing sufficient water supply is the key to ensuring emergency use.

Horizontal fire pump is a common fire-fighting equipment, which is used to supply water source and pump water source, and plays an important role in the fire-fighting process. Compared with vertical fire pumps, horizontal fire pumps are more stable and have higher efficiency. In this article, we will analyze the structural characteristics and scope of use of horizontal fire pumps.

The vertical turbine pump can be used to transport liquids such as clear water below 55°C, rainwater, scale water, sewage, industrial wastewater with corrosive irritation, sea water, etc.; after special design, it can transport liquids at 90°C. It is widely applicable to industrial and mining enterprises such as water supply companies, sewage treatment plants, power plants, steel plants, and mining, as well as engineering projects such as municipal road engineering water supply and drainage, farmland irrigation, and flood control and drainage.

Jockey pump, with simple structure and low price, is an important part of the fire protection system. There needs to be water in the fire-fighting pipeline at all times. Whenever a fire occurs, the system needs to be started immediately, and the Jockey pump can maintain the pressure value in the pipeline.