Home » Mobile pump » Features of small mobile fire pump truck

Features of small mobile fire pump truck

The small mobile fire pump truck can transport urgently needed water to the destination in a short time, or pump and drain the accumulated water on urban roads or airports in a short time in an emergency, so as to achieve flood control and disaster relief to protect the safety of people’s lives and property the goal of. The mobile pump truck can realize fast maintenance, light transportation, and no need to disassemble the pipeline system; in addition, when the use is over, the water outlet can be easily opened, which is convenient for non-destructive storage, and can be used at any time to achieve a 24-hour standby state.

Rated 4.6/5 based on 556 customer reviews
Share:
Content

Features of mobile pump truck

1. The impeller of the emergency drainage pump truck is specially designed, and the anti-clogging effect is relatively good. Generally, impurities and fibers that are sucked into the pump body can be discharged smoothly, and the diameter of the passing particles can reach 100mm, which will not cause blockage inside the equipment. . If there are solid particle impurities exceeding 100mm inhaled into the pump body and blockage occurs, there is a detachable cleaning cover in front of the pump body for easy cleaning.

2. The mobile self-priming pump truck has strong self-priming ability, and the self-priming height can reach 8 meters without the vacuum auxiliary system, and the water filling time only needs 2 minutes under the working condition of the pipeline with a total length of 15 meters.

3. The Better mobile pump truck can realize the function of adjusting the flow head by changing the caliber of the pump inlet and outlet. It can be equipped with 4-inch, 6-inch, and 8-inch quick-fit joints to meet the needs of different working conditions. The flow rate of 4-inch water pump is 100m3/h and the head is 28 meters, the flow rate of 6-inch water pump is 150-200m3/h and the head is 22 meters, the flow rate of 8-inch water pump is 250m3/h and the head is 250-300m3/h and the head is 12-20 meters.

4. The 4-inch diesel water pump, 6-inch diesel water pump, and 8-inch diesel water pump all use solid tire trailers for easy traction. There are 2-wheel or 4-wheel shapes. 2-wheels usually tow some small-caliber pumps. Cost, the 4-wheel traction type is basically used in some pump products with a large flow rate, and the steering of the pump trailer adopts a new steering principle design, which is more convenient for on-site use and movement. The pump truck can be equipped with a rain cover and lighting, which is more suitable for outdoor all-weather operation scenarios.

Inquiry


    More Mobile pump

    The diesel engine mobile pump truck is an intelligent control product, and the operation information is displayed in informational information. The running status display of diesel engine mobile pump truck includes: waiting, starting, fuel supply, starting, starting delay, idling delay, normal operation, cooling shutdown, emergency shutdown. The display of equipment operating parameters includes: water pump speed, water pump head, cooling temperature, lubricating oil pressure, water pump flow, running time, fuel stock, starting battery voltage and other parameters. Equipment protection settings include: overspeed, low speed, low oil pressure, high cooling temperature, low air temperature (below 4°C), low fuel level, low battery voltage, high battery voltage, uncalibrated speed signal, and water pump water pressure is too low and over Flow and other pre-alarms; no speed signal, overspeed, low speed, low oil pressure, high cooling temperature, start failure, shutdown failure, oil pressure sensor open/short circuit, water temperature sensor open/short circuit, speed sensor open/short circuit, water pump water pressure over Automatic alarm for low and over flow;

    When the diesel engine mobile pump truck is working, the diesel engine water pump relies on the high-speed rotating impeller, and the liquid obtains energy under the action of inertial centrifugal force to increase the pressure. Before the centrifugal pump works, the pump body and the inlet pipeline must be filled with liquid medium to prevent cavitation. When the impeller rotates rapidly, the blades make the medium rotate quickly, and the rotating medium flies out of the impeller under the action of centrifugal force. After the water in the pump is thrown out, the central part of the impeller forms a vacuum area. While continuously inhaling liquid, it continuously gives the inhaled liquid a certain amount of energy to discharge the liquid. The diesel engine water pump just works continuously like this.