Horizontal pipeline centrifugal pump

Centrifugal pumps are the most widely used pumps in a chemical industry and refineries. They are used to transport wide variety of liquids and slurries like water, hydrocarbons, in-organic chemicals etc.

By reason that the axial pump can run in the water,axial pumps is helpful for simplifying the earth work and building engineering of pumping station, reducing installation area, and saving 30~40% of project total price. For integration of water pump and motor,axial pumps is unwanted to perform axis-to-center assembly procedure on site, very convenient and expeditious to install.

Pump configuration power, high speed, small overall volume, simple structure, easy to maintain, but high temperature, easy to wear, maintenance factor. Therefore, the maintenance and maintenance of the pump is relatively difficult, in order to reduce the number of overhauls, we must do a good job of equipment maintenance and maintenance.

The sewage lifting device is a system composed of a sewage pump, a water collecting tank, a control device, and related pipe fittings and valves, which is used to lift and transport waste water below the sewers or away from the municipal pipe network. It can effectively solve or avoid the problems existing in the traditional sump.

It has the advantages of simple installation, small footprint, convenient maintenance and no noise. It is widely used in municipal engineering, factories, businesses, hospitals, hotels, residential areas and other sewage discharge.

It suitable for factory business seriously polluted wastewater emissions, residential sewage PaiWuZhan, urban sewage treatment plant drainage systems, air-defense drainage station, waterworks water supply equipment, hospital, hotel of sewage, municipal engineering, construction, mining machine, rural biogas digester, irrigation and other industries, sewage containing particles, dirt, Can also be used for clean water and with weak corrosive media.

The fire water supply pressure booster pump complete sets of equipment is the equipment for the firefighting project. The main function is to maintain the firefighting pressure of the fire extinguishing pipe network. When a fire alarm is opened, the fire extinguishing equipment can immediately spray the solid water column, and the alarm linkage starts the large fire pump. Win the initial fire extinguishing time of more than 30 seconds until the full load of the fire main pump is started. Because the equipment can maintain the pressure of the pipe network at all times, the pipe network does not have air to start. The fire pump does not slam, the pipe network has no risk of vibration.

The fire water supply pressure booster pump complete sets of equipment is the equipment for the firefighting project. The main function is to maintain the firefighting pressure of the fire extinguishing pipe network. When a fire alarm is opened, the fire extinguishing equipment can immediately spray the solid water column, and the alarm linkage starts the large fire pump. Win the initial fire extinguishing time of more than 30 seconds until the full load of the fire main pump is started. Because the equipment can maintain the pressure of the pipe network at all times, the pipe network does not have air to start. The fire pump does not slam, the pipe network has no risk of vibration.

Submersible mixer, also known as submersible thruster, is suitable for promoting and stirring sewage containing suspended solids, thin mud, industrial process liquid, etc. in the process of sewage treatment plant, creating water flow, strengthening stirring function, and preventing sludge precipitation. It is municipal and industrial sewage. Important equipment in the processing process. Divided into mixing submersible mixer, low speed submersible propeller mixer.

ZX self priming pump diesel engine driven works for water or medium similar to water that viscosity below 5°E and temperature below 80°C(176°F). It is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.

IS end suction pump, export to Bangladesh. use for CHILLER PLANT EQUIPMENT

Horizontal multi-stage pump is a kind of drainage pump, which is suitable for water supply and drainage in mines, factories and cities. It is used to transport clear water without solid particles or liquids with physical and chemical properties similar to clear water. The temperature of the medium being transported is 0 °C. ～80℃, the allowable inlet pressure is 0.6MPa.

The multistage fire pump consists of two parts: the motor and the pump, and the motor and the pump are coaxial. The structure of the pump consists of pump body, impeller, pump cover, mechanical seal and so on. The inlet and outlet of the pump are on the same horizontal axis and have the same caliber specification, so the loading and unloading is very convenient, and the floor space is small. The pump is fitted with a base for easy installation and increased pump stability. It is used to transport clear water without solid particles, liquids with physical and chemical properties similar to water. It is mainly used for pressurized water delivery in fire-fighting system pipelines, and is also suitable for industrial and urban water supply and drainage.

The application range of common domestic water supply equipment: waterworks, pressurized pump room, residential area, hotel and other buildings, enterprise production water, boiler circulating water system, farmland irrigation system.

Fire booster pump is used to maintain system pressure without starting the main pump. These pumps are not designed to keep up with full system demand, their only function is system pressure maintenance.

PHYM100/20、PHYM100/30、PHYM100/40、PHYM100/50、PHYM100/60、
PHYM100/70、PHYM100/80、PHYM100/90、PHYM100/100

The double-blade impeller structure is adopted, which greatly improves the passing capacity of dirt.
The mechanical seal adopts a new type of grinding pair, and runs in the oil chamber for a long time;
The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, and the user is convenient to replace;
Can be used within the design range without overloading the motor;

The workers from Better Technology Group are installing pump station outside

Fire pumps are a type of pump used in fire fighting. Compared to ordinary pumps, fire pumps have higher standards and requirements in terms of sealing, corrosion resistance and operational efficiency. Before running the fire pump equipment, we need to discharge the gas inside the pump, do you know what is the significance of doing so? The following is the answer from Shanghai Xizhiquan.

1. If there is gas inside the fire pump, then the equipment cannot form a sufficient vacuum during operation, resulting in the liquid not being able to be sucked up. This phenomenon is called gas binding, and is a phenomenon that often results from many operators not understanding this operation.
2, understand the formation of gas binding causes, we will understand how to avoid this problem occurs. Before the fire pump equipment is started, the pump casing needs to be filled with liquid. In the pump suction pipe mouth need to be equipped with a non-return valve, can effectively avoid the pump in the liquid due to gravity into the low tank, if the pump position is low, there is no need to carry out filling the pump.
3. The compressed gas inside the fire pump will occupy a certain space in the fire pump, making it impossible to seal it.

Therefore, the operation of deflating the fire pump before putting it into use can increase the vacuum of the equipment and increase the pumping capacity of the pump, thus effectively improving the efficiency of the equipment and reducing the waste of resources.

Non-negative pressure frequency conversion water supply equipment is a new type of water supply equipment developed on the basis of frequency conversion constant pressure water supply equipment.

XA bare pump with below Models for packing
XA100/26
XA80/26
XA65/32
XA50/32

The double-blade impeller structure is adopted, which greatly improves the passing capacity of dirt.
The mechanical seal adopts a new type of grinding pair, and runs in the oil chamber for a long time;
The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, and the user is convenient to replace;
Can be used within the design range without overloading the motor;

Oil-water separator is a device, divided into catering oil-water separator and industrial oil-water separator. Catering oil and water separator is used to treat sewage in the catering industry; Because of the requirements of environmental protection, the sewage produced by the ship machinery space in rivers and lakes must be treated, and the industrial oil-water separator is needed.

Magnetic steel generally refers to aluminum nickel cobalt alloy (magnetic steel in English AlNiCo is the abbreviation of aluminum nickel cobalt), magnetic steel is made of several hard strong metals, such as iron, aluminum, nickel, cobalt and other synthesis, sometimes copper, niobium, tantalum synthesis, used to make super hard permanent magnet alloy.

The remote monitoring system for the water supply pump station is suitable for the remote monitoring and management of the pressurized pump station in the urban water supply system.
The pump station manager can remotely monitor the water level of the pump station pool or the entry pressure, the working status of the booster pump group, the outbound flow, and the exit pressure from the monitoring center; they can remotely control and automatically control the start and stop of the booster pump group; When optical fiber communication is used, the panorama and important stations in the station can be monitored by image, so that the pump station can be unattended.

The special hydraulic design and structural design make it more suitable for building fire-fighting water supply system with flow and pressure grading than ordinary centrifugal clean water pumps, and the flow-pressure characteristic curve is flat and has no hump. All parts of the friction parts due to rotation are made of wear-resistant, corrosion-resistant and anti-meshing materials, which have high reliability. The multi-stage pump can be equipped with double water outlets, which has high bearing capacity, strong anti-overload capacity and sensitive starting. .

This fire pumps are multifunctional products, which can be used for conveying diversified mediums such as running water and industrial liquids. They are applicable to different temperature ranges, flow ranges, and pressure ranges. The Vertical Multistage Pumps are applied to noncorrosive liquids, and this type pumps are applied to slightly corrosive liquids.

The pump station from Better Technology Group is being installed

In this pump room, electric pump power is 315kw

Reliable because of professionalism, specializing in the production of industrial fire pumps for 20 years, to provide you with the best quality and most intimate service.
if you are interested in our pumps, welcome to contact us!