What is a jockey pump?

The equipment CONSISTS of frequency conversion control cabinet, no negative pressure device, automatic control system and remote monitoring system, water pump unit, voltage regulator compensator, negative pressure eliminator, pressure sensor, valve, instrument and piping system.

The waste cone is providing quick visual confirmation of proper water flow in the fire pump system.

Oil-water separation device is a device that separates oil and water. The oil-water separation device is one of the important environmental protection facilities in the sewage treatment plant. Its function is to improve the biodegradability of sewage and reduce the energy consumption and treatment cost of sewage treatment.

In this pump room, electric pump power is 315kw

Significant energy saving, small footprint, easy installation and stable performance.
The jacket is made of 304 high-quality stainless steel, and the shaft seal is made of wear-resistant mechanical seal, which has no leakage and long service life.
The axial force is solved by hydraulic balance, so the operation is stable and the noise is low.

The sewage pump is a kind of centrifugal impurity and has many forms: such as submersible type and dry type. At present, the most common submersible type is the WQ type submersible sewage pump, and the most common dry type sewage pump is the W type horizontal sewage pump. And two types of WL vertical sewage pump. Mainly used to transport urban sewage, manure or liquid containing fiber. For the medium of solid particles such as paper scraps, the temperature of the conveyed medium is usually not greater than 80¡ãC.

ZX series self-priming pump is a self-priming centrifugal pump. The self-priming centrifugal pump has the advantages of compact structure, convenient operation, stable operation, easy maintenance, high efficiency, long life, and strong self-priming ability. There is no need to install a bottom valve in the pipeline, and it is only necessary to ensure that there is a quantitative liquid in the pump body before work. Therefore, the self-priming centrifugal pump simplifies the pipeline system and improves the working conditions.

. The rotor part is composed of shaft, impeller, impeller retaining sleeve, shaft sleeve and other parts, and the water inlet section, middle section and water outlet section are connected by tension bolts. The shaft seal adopts a mechanical seal, lubricated and cooled by the pressure water in the balance chamber.

The integrated prefabricated sewage pumping station of Beide Technology Group Co., Ltd. serves the glass production base in Xingan County Development Zone, Ji’an, Jiangxi Province. On-site commissioning training is delivered to relevant departments. Thank you and leaders for the support.

1. The pump is a vertical structure, the inlet and outlet diameters are the same, and they are located on the same center line. It can be installed in the pipeline like a valve. The appearance is compact and beautiful, the floor space is small, and the construction investment is low. Can be used outdoors.
2. The impeller is directly installed on the elongated shaft of the motor, the axial dimension is short, the structure is compact, and the pump and motor bearings are reasonably arranged, which can effectively balance the radial and axial loads generated by the operation of the pump, thereby ensuring the smooth operation of the pump. Low vibration and low noise.
3. The shaft seal adopts mechanical seal or mechanical seal combination, adopts imported titanium alloy sealing ring, medium-sized high temperature resistant mechanical seal and hard alloy material, wear-resistant seal, which can effectively prolong the service life of mechanical seal.
4. Easy installation and maintenance, no need to dismantle the pipeline system, just remove the pump joint seat nut to extract all the rotor parts.
5. The series and parallel operation modes of pumps can be adopted according to the requirements of use, that is, the needs of flow and head.
6. The vertical and horizontal installation of the pump can be adopted according to the requirements of the pipeline arrangement.

The YE2 series three-phase induction motor is inline with IE3 effieiency standard in the provisions of IEC60034-30-2008. And
the improvement of the efficiency in its design is in line with the state’s requirements on the energy saving and consumption
reducing of the manufacturing sector.
YE2  series motors with the mounting dimension in accordance with standard IEC60034,1t has good features like optimum
structure, attractive appearance, low noise, high efficiency, high protection class as well as high insulation class. YE2 series motors
can be widely used in various kinds of general use machineries like fans, pumps, machin tools, compressors, transportation and
so on, and can also be used in the hazardous areas with oil and chemical, steel plants, mining industry

Applitions:
Water works: Water intake/Water supply/Booster
Industrial use: Water intake/Water supply/Booster/Circulation/
Drainage/Chemical/Re-finery/Firefighting/Sea water desalination
Agricultural use: Irrigation and Drainage

The constant pressure variable frequency water supply equipment is an advanced system designed to maintain stable water pressure while ensuring energy-efficient water supply. It utilizes variable frequency technology and an intelligent control system to dynamically adjust pump speed and water pressure based on real-time water demand. This eliminates energy wastage caused by frequent start-stop cycles in traditional systems, providing users with a constant water pressure supply for stable and reliable water distribution during peak and off-peak periods. The equipment’s intelligent control system enables remote monitoring and automatic alarms, improving operational reliability and maintenance efficiency. Widely applied in industrial, construction, agricultural, and municipal sectors, this energy-efficient solution optimizes water supply systems to meet diverse user demands effectively.

Product Introduction of Electric Fire Pumps
XBD electric fire pumps are a kind of new type fire products researched and developed in full compliance with the state issued-newly standard of GB6245-2006 “Fire pump”, according to the end-user’s practical needs and special using requirements. The inspection of the state fire equipment quality supervising center shows its all kinds of performance indexes are up to or over the standard’s requirements and it earned the certificate for fire state products.

Hygienic and clean to use, high efficiency, low noise, mild corrosion resistance and compact structure, beautiful appearance, small size, light weight, convenient use and maintenance, reliable sealing performance

WQ (QW、WQK ) series submersible sewage pump applicable to transport containing solids and fiber of sewage or clean water.

The pump consists of these assemblies, that is the crooking assembly and the column pipe assembly below ground and the drive device above ground.

Sewage pump is a pump and motor connected, and at the same time into the liquid work pump products, compared with the general horizontal pump or vertical sewage pump, sewage pump compact structure, small footprint. Easy installation and maintenance, large sewage pumps are generally equipped with automatic coupling device can be automatically installed, installation and maintenance is quite convenient. Long continuous operation time.

This kind of controller was fit for high-voltage motor，which is the voltage of motor is 6000V or 10KV.

including high-voltage switch cabinet, High-pressure solid-state soft starter device,High-voltage reactive power centralized compensation device,direct current cabinet, onsite cabinet, intellengint inspection cabinet, High-voltage patrol inspection contact cabinet, Emergency starting cabinet for high-voltage machinery

Filter is an indispensable device on the transmission medium pipeline, usually installed in the pressure reducing valve, pressure relief valve, fixed water level valve, square filter other equipment import end equipment.

Specifications
1. for life, fire
2. Production sharing water
3. Low noise, good reliability
4. Reasonable construction
Application
Industrial and civil construction fixed fire protection system（fire hydrant extinguishment system, automatic spray extinguishment system, water spray extinguishment system）water supply, especially suitable for water supply of high-rise buildings, and also use for water supplying of fire-fighting and life in construction, industry and mining, boiler water supply, etc.

The remote monitoring system for the water supply pump station is suitable for the remote monitoring and management of the pressurized pump station in the urban water supply system.
The pump station manager can remotely monitor the water level of the pump station pool or the entry pressure, the working status of the booster pump group, the outbound flow, and the exit pressure from the monitoring center; they can remotely control and automatically control the start and stop of the booster pump group; When optical fiber communication is used, the panorama and important stations in the station can be monitored by image, so that the pump station can be unattended.

The special hydraulic design and structural design make it more suitable for building fire-fighting water supply system with flow and pressure grading than ordinary centrifugal clean water pumps, and the flow-pressure characteristic curve is flat and has no hump. All parts of the friction parts due to rotation are made of wear-resistant, corrosion-resistant and anti-meshing materials, which have high reliability. The multi-stage pump can be equipped with double water outlets, which has high bearing capacity, strong anti-overload capacity and sensitive starting. .

LW series vertical non-clogging sewage pump is a pump product successfully developed based on the characteristics of domestic water pumps. It has the characteristics of excellent energy saving effect, anti-winding, non-clogging, automatic installation and automatic control. It has a unique effect in discharging solid particles and long-fiber waste. Compared with the traditional impeller, the impeller adopts the form of single flow channel or double flow channel. It is similar to a curved pipe with the same cross-section and has very good flow capacity. With a reasonable volute chamber, the pump has high efficiency, The impeller is tested by dynamic and static balance, and the sewage pump is automatically stirred so that the pump has no vibration during operation.

Submersible sewage pump is suitable for conveying sewage and dirt with particles in chemical industry, petroleum industry, pharmaceutical industry, mining industry, paper industry, cement plant, steel plant, power plant, coal processing industry, urban sewage treatment plant drainage system, municipal engineering, construction site and other industries. It can also be used for pumping clean water and corrosive media.

For end suction pumps and since water is entering one side of the impeller, and due to the design of “Impeller overhung”, these pumps cannot be used for large water flow applications and usually not exceeding 1500 gpm of flow.

The automatic water supply equipment automatically adjusts the number of running water pumps and the speed of a water pump according to the change of the user’s water consumption, so that the outlet pressure of the water pump remains constant.

The electric diaphragm pump is a reliable and efficient industrial pump powered by an electric motor. It uses diaphragms to move liquids, making it suitable for handling various fluids, including clear water, chemicals, corrosive liquids, viscous substances, and particle suspensions. With its compact size and lightweight design, the pump is easy to install and maintain. It finds extensive use in industries such as chemical, petroleum, food and beverage, paper-making, and environmental protection. The pump’s leak-free and eco-friendly operation ensures safe and sustainable fluid handling processes. Its versatility, efficiency, and reliability make it an ideal choice for fluid transportation in various industrial applications.

Our highly acclaimed Box-type Non-Negative Pressure Water Supply Equipment is the savior for your hotels, hospitals, schools, and more! Not only does it provide stable water flow and pressure, but it also guarantees fresh water quality! Suitable for life water supply systems in high-rise buildings, residential communities, and large-scale architectural complexes, bid farewell to water shortage worries! The Box-type Non-Negative Pressure Water Supply Equipment features an advanced automatic control system that instantly starts the water pump when demand increases, providing you with a continuous and stable water flow. And when demand decreases, the pump intelligently stops, avoiding energy waste! The compact box-type structure makes installation and maintenance a breeze! Whether it’s solving water supply issues in low-pressure areas or addressing the needs of places like hotels, hospitals, and schools where water cannot be shut off but face insufficient tap water pressure, our Box-type Non-Negative Pressure Water Supply Equipment offers the perfect solution!

The equipment through the back curved impeller will be liquid forward at the same time, the sludge in the oxidation tank to fully stir and mix, to improve the oxidation tank and other sewage treatment facilities water flow conditions, so that different water to obtain the sewage treatment process required by the flow rate, in order to prevent sludge settlement, improve the efficiency of sewage treatment.