What is an air conditioner pump?

Export fire pump set will be packaged with free fumigating wooden case.

It is a fire pump that is directly connected with a light engine and a water pump, and can be lifted and moved by manpower. It is used to fight general material fires and small oil fires. Because the hand pump is light and flexible, and is not restricted by traffic, electricity, and regional obstacles, it has been widely used in industrial and mining enterprises, warehouses, ports, docks and rural areas. The place where the fire started.

This series pump is designed with excellent hydraulic models，it is excellent hydraulic performance and structural features ensure that the users can effctively reduced the operating cost of the pump in various applications.
Meet ISO2858, ISO9908, UL448 international standards.

Discover how to select the right vertical fire pump for your project, with insights on structure, performance, installation, and UL/FM/CE certifications for reliable fire safety.

The equipment CONSISTS of frequency conversion control cabinet, no negative pressure device, automatic control system and remote monitoring system, water pump unit, voltage regulator compensator, negative pressure eliminator, pressure sensor, valve, instrument and piping system.

XBD series fire pumps are mainly used for the fixed fire hydrant firesystem, automatic spraying fire system used by all sorts of organs, projects, high-floor buildings etc. and can be trans ferred with the clear water without solid grain under 100 – ℃ or its equivalence, also be used for public-used water providing system for fire, living, production, construction and municipality.

This device is effective for Class A (ordinary combustibles), Class B (flammable liquids), and certain Class D (combustible metals) fires, depending on the type of foam concentrate used.

IS end suction pump, export to Bangladesh. use for CHILLER PLANT EQUIPMENT

ZJ-BETTER vertical long shaft fire pump is engineered for deep wells and complex water sources, delivering high head and flow performance. Ideal for petrochemical terminals, municipal systems, and critical infrastructure, it ensures efficient, safe, and intelligent fire protection solutions.

XA bare pump with below Models for packing
XA100/26
XA80/26
XA65/32
XA50/32

The YE2 series three-phase induction motor is inline with IE3 effieiency standard in the provisions of IEC60034-30-2008. And
the improvement of the efficiency in its design is in line with the state’s requirements on the energy saving and consumption
reducing of the manufacturing sector.
YE2  series motors with the mounting dimension in accordance with standard IEC60034,1t has good features like optimum
structure, attractive appearance, low noise, high efficiency, high protection class as well as high insulation class. YE2 series motors
can be widely used in various kinds of general use machineries like fans, pumps, machin tools, compressors, transportation and
so on, and can also be used in the hazardous areas with oil and chemical, steel plants, mining industry

Fuel tank specifications：200L/400L/600L/800L/1000L/1200L/1500L/1800L/2100L/2500L/3100L/3600L/4100L/4500L

High-power fire pump motors are designed to be efficient and durable, supporting long-term continuous operation. They feature high energy efficiency, low noise, high protection levels, and multiple starting methods. They are widely used in fire protection systems in high-rise buildings, industrial parks, petrochemical storage facilities, and infrastructure to ensure stable and reliable water supply.

The pump shell has two types of axial and radial sections. The shell of most single stage pump is volute type, the radial division shell of multistage pump is generally annular shell or circular shell.

The electric diaphragm pump is a reliable and efficient industrial pump powered by an electric motor. It uses diaphragms to move liquids, making it suitable for handling various fluids, including clear water, chemicals, corrosive liquids, viscous substances, and particle suspensions. With its compact size and lightweight design, the pump is easy to install and maintain. It finds extensive use in industries such as chemical, petroleum, food and beverage, paper-making, and environmental protection. The pump’s leak-free and eco-friendly operation ensures safe and sustainable fluid handling processes. Its versatility, efficiency, and reliability make it an ideal choice for fluid transportation in various industrial applications.

Volume:500-2000L

This vertical single-stage fire pump is designed with precision hydraulics and high-performance operation to fully meet the dual demands of stability and responsiveness in modern fire protection systems. Driven by a high-quality motor, it ensures quiet operation and high efficiency, delivering a reliable and powerful water flow when it’s needed most. Its compact structure takes up minimal space, making it ideal for high-rise buildings, commercial complexes, and industrial facilities with limited installation areas. The modular design also facilitates easy maintenance and seamless system integration, making it the perfect solution for enhancing water supply efficiency in fire protection systems.

Automatic exhaust components for fire protection systems offer advantages such as automatic exhaust, stable pressure supply, high reliability, and energy-saving operation, and are widely used in high-rise buildings, industrial fire protection, and complex fire protection piping systems.

When a partial failure of the equipment occurs, the emergency function can be enabled to continue the water supply. The equipment can be automatically connected to the municipal water supply network, and has dual constant pressure functions, which can meet the normal pressure and flow of domestic and production water, and can automatically switch to high-pressure and large-flow water supply when a fire occurs, and can be used for multiple purposes.

Sewage pump is a pump and motor connected, and at the same time into the liquid work pump products, compared with the general horizontal pump or vertical sewage pump, sewage pump compact structure, small footprint. Easy installation and maintenance, large sewage pumps are generally equipped with automatic coupling device can be automatically installed, installation and maintenance is quite convenient. Long continuous operation time.

By reason that the axial pump can run in the water,axial pumps is helpful for simplifying the earth work and building engineering of pumping station, reducing installation area, and saving 30~40% of project total price. For integration of water pump and motor,axial pumps is unwanted to perform axis-to-center assembly procedure on site, very convenient and expeditious to install.

Fire booster pump is used to maintain system pressure without starting the main pump. These pumps are not designed to keep up with full system demand, their only function is system pressure maintenance.

ISG series vertical single-stage single-suction centrifugal pump is a new generation of energy-saving and environmentally friendly vertical centrifugal pump developed by the company’s technical staff on the basis of absorbing the advanced technology of similar products at home and abroad, and using the performance parameters of domestic general centrifugal pumps. This series of pumps has excellent performance, high reliability, long life, reasonable structure and beautiful appearance, and has a leading level in the industry.

1. The pump is a vertical structure, the inlet and outlet diameters are the same, and they are located on the same center line. It can be installed in the pipeline like a valve. The appearance is compact and beautiful, the floor space is small, and the construction investment is low. Can be used outdoors.
2. The impeller is directly installed on the elongated shaft of the motor, the axial dimension is short, the structure is compact, and the pump and motor bearings are reasonably arranged, which can effectively balance the radial and axial loads generated by the operation of the pump, thereby ensuring the smooth operation of the pump. Low vibration and low noise.
3. The shaft seal adopts mechanical seal or mechanical seal combination, adopts imported titanium alloy sealing ring, medium-sized high temperature resistant mechanical seal and hard alloy material, wear-resistant seal, which can effectively prolong the service life of mechanical seal.
4. Easy installation and maintenance, no need to dismantle the pipeline system, just remove the pump joint seat nut to extract all the rotor parts.
5. The series and parallel operation modes of pumps can be adopted according to the requirements of use, that is, the needs of flow and head.
6. The vertical and horizontal installation of the pump can be adopted according to the requirements of the pipeline arrangement.

Significant energy saving, small footprint, easy installation and stable performance.
The jacket is made of 304 high-quality stainless steel, and the shaft seal is made of wear-resistant mechanical seal, which has no leakage and long service life.
The axial force is solved by hydraulic balance, so the operation is stable and the noise is low.

WXZQ series fire pneumatic water supply equipment is composed of fire pressure stabilizing device, fire pump
and electric control system. As a complete set of equipment, it can meet all technical specifications of automatic
fire water supply. In addition, it can accept and process all kinds of fire signals, replace the fire control center,
and send out all kinds of operation and fault alarm signals.

Fire pumps are a type of pump used in fire fighting. Compared to ordinary pumps, fire pumps have higher standards and requirements in terms of sealing, corrosion resistance and operational efficiency. Before running the fire pump equipment, we need to discharge the gas inside the pump, do you know what is the significance of doing so? The following is the answer from Shanghai Xizhiquan.

1. If there is gas inside the fire pump, then the equipment cannot form a sufficient vacuum during operation, resulting in the liquid not being able to be sucked up. This phenomenon is called gas binding, and is a phenomenon that often results from many operators not understanding this operation.
2, understand the formation of gas binding causes, we will understand how to avoid this problem occurs. Before the fire pump equipment is started, the pump casing needs to be filled with liquid. In the pump suction pipe mouth need to be equipped with a non-return valve, can effectively avoid the pump in the liquid due to gravity into the low tank, if the pump position is low, there is no need to carry out filling the pump.
3. The compressed gas inside the fire pump will occupy a certain space in the fire pump, making it impossible to seal it.

Therefore, the operation of deflating the fire pump before putting it into use can increase the vacuum of the equipment and increase the pumping capacity of the pump, thus effectively improving the efficiency of the equipment and reducing the waste of resources.

Multi-stage fire fighting pump adopts special hydraulic design and structural design make it more suitable for building fire fighting water supply system than ordinary centrifugal clear water pumps, with a flat flow-pressure characteristic curve and no hump. Better Technology Company provide vertical and horizontal types.

Submersible pump is an important equipment for deep well water extraction. During use, the whole unit works in the water to extract groundwater to the surface, which is used for domestic water, mine rescue, industrial cooling, farmland irrigation, sea water lifting, ship load regulation, and fountain landscape.

End suction centrifugal water pump is an energy-saving pump designed by teamwork in the whole nation, it is improved on a basis on model BA, B and other single-stage water centrifugal pump.