Horizontal Mixed-Flow Pump

Product Introduction of
ZX series self-suction pump is an energy saving pump designed with ISO international standard and developed through absorbing and improving the r elated technical data both at home and abroad and belongs to the self-suction centrifugal pump and uses the mechanical seal of a ceramic ring so as to resist any sandy liquid to go into the sealing face, preventing it from getting scratched. This pump holds the advantages of a compact structure, easy operation, stable movement, easy maintenance, high efficiency, long duration and strong self-suction capacity and, as no foot valve is needed to be mounted on the pipeline and only a certain amount of leading liquid is required to be filled into the pump before work, improves the work condition while simplifying the pipeline system.

The fire water supply pressure booster pump complete sets of equipment is the equipment for the firefighting project. The main function is to maintain the firefighting pressure of the fire extinguishing pipe network. When a fire alarm is opened, the fire extinguishing equipment can immediately spray the solid water column, and the alarm linkage starts the large fire pump. Win the initial fire extinguishing time of more than 30 seconds until the full load of the fire main pump is started. Because the equipment can maintain the pressure of the pipe network at all times, the pipe network does not have air to start. The fire pump does not slam, the pipe network has no risk of vibration.

Our highly acclaimed Box-type Non-Negative Pressure Water Supply Equipment is the savior for your hotels, hospitals, schools, and more! Not only does it provide stable water flow and pressure, but it also guarantees fresh water quality! Suitable for life water supply systems in high-rise buildings, residential communities, and large-scale architectural complexes, bid farewell to water shortage worries! The Box-type Non-Negative Pressure Water Supply Equipment features an advanced automatic control system that instantly starts the water pump when demand increases, providing you with a continuous and stable water flow. And when demand decreases, the pump intelligently stops, avoiding energy waste! The compact box-type structure makes installation and maintenance a breeze! Whether it’s solving water supply issues in low-pressure areas or addressing the needs of places like hotels, hospitals, and schools where water cannot be shut off but face insufficient tap water pressure, our Box-type Non-Negative Pressure Water Supply Equipment offers the perfect solution!

1、 Star delta startup mode
2、 Auto coupling step-down startup mode
3、 Soft start mode
4、 Direct start mode

This series pump is designed with excellent hydraulic models，it is excellent hydraulic performance and structural features ensure that the users can effctively reduced the operating cost of the pump in various applications.
Meet ISO2858, ISO9908, UL448 international standards.

The diesel engine irrigation pump can adapt to various harsh irrigation environments. It has simple structure, light weight and convenient movement. Without on-site installation, it can be directly put into use. With high-pressure design, the irrigation range is large and the effect is good. The company is committed to developing the best irrigation pump to allow customers in all regions to solve farmland irrigation problems.

The double-blade impeller structure is adopted, which greatly improves the passing capacity of dirt.
The mechanical seal adopts a new type of grinding pair, and runs in the oil chamber for a long time;
The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, and the user is convenient to replace;
Can be used within the design range without overloading the motor;

Electric fire pump controllers are designed to start an electric motor driven fire pump.Diesel engine fire pump contollers are designed to automatically start a diesel engine driven fire pump upon detection of a pressure drop in the fire protection system.

ZX self priming pump diesel engine driven works for water or medium similar to water that viscosity below 5°E and temperature below 80°C(176°F). It is compact, easy to operate, running stable, easy to maintain, efficient, with long service life and large suction capacity.

The suction and discharge ports of the GDL vertical multistage pipeline centrifugal pump are located on the same straight line. The rotor part is composed of shaft, impeller, impeller retaining sleeve, shaft sleeve and other parts, and the water inlet section, middle section and water outlet section are connected by tension bolts. The shaft seal adopts a mechanical seal, lubricated and cooled by the pressure water in the balance chamber. It is an ideal pump type for the transportation of hot and cold water or liquids with similar physical and chemical properties to water in various industries.

High efficiency, flat performance curve, wide operating range, in line with the relevant regulations of the fire department, and can meet the needs of different users
Adopt segmented structure, stable operation, low noise, long service life, small footprint, easy installation and maintenance

The multistage pump is a centrifugal pump in and out of the water section and the middle section, through the rod combination together, its output water pressure can be very large, but also depends on the rotation of the impeller to obtain the centrifugal force, so that the material. When the gas density reaches the working range of the mechanical vacuum pump, it is extracted, and the high vacuum is gradually obtained.

The domestic water supply equipment system is equipped with storage tanks and other water storage facilities, which saves the floor area and reduces the construction load, thereby saving a large amount of civil engineering investment costs. The intelligent and automatic operation of the equipment does not require a special person to be on duty, which saves management costs, and there is no water quality treatment instrument, which eliminates the need for regular cleaning and disinfection; the loss of system dripping, leakage, and overflow is reduced.

1. In the rural areas is mainly used as feces, mud and water, feed slurry pumping and pouring, instead of shoulder, and for flood, drought resistance, mud manure production can also simple flow fire pump in countryside.
2. Used in municipal engineering, chemical industry, printing and dyeing, pharmaceutical, shipbuilding, foundry, food and other industry suction thick liquid, dirty liquid, paste , flow sand and urban river flow sludge etc. can also be used in coal mines exclude fluid containing small mud gravel.
3. If with high pressure pump and water gun, the composition of hydraulic mechanized earthmoving machine, available in the formation of land, river and pond dredging, drilling and other small-scale water conservancy projects of excavation and transportation, and urban air defense engineering, underground engineering.
4. Fish used as a water pond, fish pond oxygen etc..

It is composed of pressure water tank, control cabinet, top pressure gas storage system, decompression release device and other basic components; In the condition of fire fighting, the compressed gas is filled into the pressure water tank to replace the fire fighting water in the tank, and always maintain the rated working pressure of fire fighting, and the fixed fire water supply equipment for the fire fighting pipe network.

XA bare pump with below Models for packing
XA100/26
XA80/26
XA65/32
XA50/32

. The rotor part is composed of shaft, impeller, impeller retaining sleeve, shaft sleeve and other parts, and the water inlet section, middle section and water outlet section are connected by tension bolts. The shaft seal adopts a mechanical seal, lubricated and cooled by the pressure water in the balance chamber.

The ZWX box-type non-negative pressure water supply equipment is a pressurized water system designed to address inadequate municipal water pressure in critical settings such as hospitals and hotels, where water cannot be shut off. It also serves as an ideal solution for meeting the domestic water needs of high-rise buildings and, specifically, fulfilling the water requirements of schools. This equipment ensures a continuous water supply, even during maintenance or emergency situations, effectively resolving the challenges posed by low water pressure. With its efficient pressurized water supply and advanced control technology, the ZWX equipment offers stable water pressure and flow rates, catering to the diverse demands of different settings.

ISWR horizontal single-stage single-suction hot-water pump is to be used in metallurgy, chemical industry, textile, timber-processing, paper making, pressure circulating conveyance of boiler hot water in hotels, bathrooms or restaurants, and circulated heating pumps in city houses. Its operation temperature is below 99C.

Multi-stage fire fighting pump adopts special hydraulic design and structural design make it more suitable for building fire fighting water supply system than ordinary centrifugal clear water pumps, with a flat flow-pressure characteristic curve and no hump. Better Technology Company provide vertical and horizontal types.

The air conditioning pump system is an indispensable part of modern HVAC systems, regulating the temperature within a building by circulating hot or cold water, providing a comfortable indoor environment. This article delves into the product features of air conditioning pump systems, helping you understand their significance and how to optimize the heating, ventilation, and air conditioning efficiency of your building.

Significant energy saving, small footprint, easy installation and stable performance.
The jacket is made of 304 high-quality stainless steel, and the shaft seal is made of wear-resistant mechanical seal, which has no leakage and long service life.
The axial force is solved by hydraulic balance, so the operation is stable and the noise is low.

The pump integrates self-priming and non-clogging sewage discharge, adopts the axial return and external mixing type, and through the unique design of the pump body and the impeller flow channel, it does not need to install the bottom valve and irrigation water like the general self-priming clean water pump. It can also suck and discharge liquids containing large particles of solids and long fibers. It can be widely used in municipal sewage projects, river and pond aquaculture, light industry, papermaking, textiles, food, chemicals, electricity, fibers, pulp and mixed suspension. The ideal impurity pump.

These pictures show electric motors of different powers. We can produce many kinds of motors to meet the different needs of customers.

The fire pump is a stainless steel outdoor control cabinet with waterproof features. The fire pump control cabinet is mainly suitable for industrial production and various building water supply, drainage, fire protection, sprinkler pipe network pressurization and HVAC cold and hot water circulation and other occasions automatic control of fire pump

Features:
The double-blade impeller structure is adopted, which greatly improves the passing capacity of dirt.
The mechanical seal adopts a new type of grinding pair, and runs in the oil chamber for a long time;
The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, the maintenance is convenient, and the user is convenient to replace;
Can be used within the design range without overloading the motor.

The Fire Pressure Stabilization Equipment, coupled with the CDL Vertical Multistage Fire Pump, offers a comprehensive solution to elevate fire safety measures. This powerful combination ensures a consistent water pressure for effective fire suppression. By incorporating pressure stabilization technology, this system guarantees an uninterrupted fire water supply, efficient water distribution, and reliable operation of fire hydrants and sprinkler systems. With advanced infrastructure and the ability to maximize firefighting capabilities, this configuration significantly enhances overall fire safety standards. Investing in fire pressure stabilization equipment is a proactive step towards ensuring superior fire protection and providing peace of mind in critical situations.

Yes, vertical turbine pumps can be constructed from materials such as stainless steel or high-strength alloys to withstand corrosive fluids or abrasive particles. Additionally, various coating and lining options are available to further protect pump components from corrosion or wear.

The pump consists of these assemblies, that is the crooking assembly and the column pipe assembly below ground and the drive device above ground.

The fire pump refers to a clean water pump used for fire water supply, and a single pump that handles medium temperature below 80 degrees and is not corrosive. The pump set is the joint operation of multiple fire pumps to ensure the quantity and stability of the water supply. The electric motor fire pump group adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump group are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water lift pipe, etc. The specific fire pump model is determined according to the environment and performance requirements, and at the same time According to the material quotation required by the customer, accurate selection is beneficial to on-site use and reduces failure problems.