Electric fire pumps are suitable for pressurized water delivery in fire pipelines

DJ fire pump group is mainly composed of diesel engine and regulator pump, can be selected in the state of no power supply.

The minimum fire rated pressure of small fire fighting package set water supply equipment is 3 bar, and the minimum fire rated capacity is 25 GPM. ED small fire fighting package set water supply equipment includes at least two power or power source driven pumping units, pressure tanks, pipes, valves and accessories, measurement and control instruments, control cabinets, outdoor rain cover, etc.

The standard DJ fire pump set consists of one diesel pump + one jockey pump, which is suitable for fire protection occasions such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas, textiles, ships, and oil tankers.

1. Water filling treatment Before selecting the power-on power, make sure that the fire pump should be filled with water when it is turned off, and the suction should be increased to make the pressure difference larger and quickly clean up some acid-base reagents and other pollutants. Make sure to fill the water well.

2. Selection of electrified power The horsepower of the fire pump will be selected according to the size of the pump. Before electrifying the pump, carefully check the electrical power. Once the power is not grasped accurately, it is easy to cause insufficient suction. Therefore, in order to make it have sufficient suction, the power should be selected reasonably. If there is no electricity, the fire pump cannot be started, let alone used. But does it mean that the pump can be used as long as there is electricity? Not necessarily, the pump can only be used if the electrified power is reasonable and the voltage is within the normal range.

The electric fire pump set is a fire pump powered by an electric motor, and generally consists of a set of fire pumps, electric motors, control cabinets and auxiliary devices. Because the electric motor fire pump set is composed of these parts, it forms a powerful fire protection and power effect, and provides a strong water source support for various fire hydrant systems and sprinkler systems in the building.

This fire pump is built with high-strength materials and precision manufacturing to ensure stable operation under high-pressure conditions. Its advanced hydraulic design minimizes energy loss, enhancing pump efficiency and pressure output. Additionally, it features a high-performance sealing system that effectively prevents leaks, extending the equipment’s lifespan. Moreover, the pump unit is equipped with an intelligent monitoring system that continuously tracks operational status and adjusts parameters in real time, ensuring a stable and reliable water supply when it matters most.

Application fields of fire pump set:
Industrial fields: various petroleum, petrochemical, chemical, oil fields, management bureaus, oil depots, oil terminals, oil refineries, offshore platforms, etc., national grain depots, thermal power plants, steel mills, shipyards, paper mills, etc.;
Commercial fields: five-star hotels, hospitals, schools, supermarkets, office buildings, large commercial complexes, highway tunnels, subway stations, railway stations, airports, fire engineering companies.

This high-reliability fire pump set is designed to meet the challenging firefighting demands of complex environments, making it ideal for use in extreme conditions such as high temperatures, humidity, or low temperatures. Whether in petrochemical plants, high-rise buildings, or industrial parks, this pump set operates reliably under various tough working conditions, ensuring a continuous and stable water supply.

The system is driven by an advanced electric motor and equipped with an intelligent control panel that features automatic start/stop, pressure adjustment, and fault alarms, ensuring efficient and stable performance under all conditions. The modular design enhances the flexibility and maintainability of the pump set while significantly reducing operational and maintenance costs, ensuring long-term stability and high efficiency.

Compliant with international safety standards and rigorously tested for quality, this fire pump set meets the high requirements of modern fire protection systems, making it the ideal solution for safeguarding the fire safety of critical facilities.

0TS series double suction horizontal split case pump is a new series designed based on improvement and innovantion of our company’s traditional products;S、 SH、 SA series, provide a wider range of hydraulic coverage and wide variety of application.
FEATURES Split case design permits easy disassembly, that is, inspection issimplified, it is not necessary to disturb pump alignment and suction&dscharge piping when parts replacement is necessary.
Double suction with advanced designof suction perfromance ensures high suction lift even with large capacity.

After several years of R&D testing and certification, Beide Technology Group Co., Ltd. has obtained FM/UL certification for its existing fire pumps after obtaining domestic 3CF certification, and joined the NFPA Fire Engineers Association. Beide Technology Group Co., Ltd. has been committed to providing human beings with more reliable, more energy-saving and safer pump products.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

The horizontal split case fire pump offers high flow capacity, double-suction design, low noise, and easy maintenance—making it the ideal solution for stable fire protection in modern buildings, industrial zones, and municipal projects. Discover its structure, performance, and wide-ranging applications.

Diesel engine fire pumps are used more and more widely. Diesel engine fire pump is a common and necessary facility. Only when the fire signal comes, and the electric water pump fails or the power supply is cut off, the diesel engine fire pump will automatically start. Diesel engine fire pump is installed together with electrical instruments, with complete functions, compact structure, automatic fault alarm, receiving start signal, and can automatically complete the start-up procedure and fast full-load operation. , Enough to ensure that the diesel engine fire pump is started in a low temperature environment, the whole system of the diesel engine fire pump is safe, reliable, and easy to use.

diesel fire pump set, also known as a diesel engine-driven fire pump, is a type of fire pump system used for fire protection in buildings, facilities, and industrial settings. It is designed to provide water at high pressure and flow rates to fire sprinkler systems, standpipe systems, and other fire protection equipment in the event of a fire emergency. Diesel fire pump sets are an essential component of fire protection systems, especially in areas with unreliable or insufficient electric power supply.

We can manufacture fire pumps that are NFPA20 compliant and UL listed.
Fire pumps can function with electric motors or diesel engines, and if local building codes require electricity independent of the local grid, pumps using electric motors can use the installation of an emergency generator when connected through a transfer switch listed.

The diesel engine fire pumps used in this series of equipment are made of domestic or imported high-quality products, which have the characteristics of good starting characteristics, strong overload capacity, compact structure, convenient maintenance, simple use, and high degree of automation. It is an advanced and reliable fire-fighting equipment.

Flow: 30-9000GPM
Head: 3-20Bar
Speed: 740-2900r/min
Frequency: 50 HZ or 60 HZ
The ED Fire Pump Set combines electric and diesel engine pumps to ensure uninterrupted fire protection and a reliable water supply.
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants,oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

When installing a fire pump, it is essential to adhere to specific requirements to ensure its proper functionality and compliance with safety standards. Here are some important installation requirements to consider:

Codes and Standards: Familiarize yourself with local fire codes, regulations, and industry standards applicable to fire pump installations.

Location and Accessibility: Choose an appropriate location for the fire pump that allows for easy access, maintenance, and serviceability.

Foundation and Mounting: Ensure that the fire pump is installed on a stable and level foundation capable of supporting its weight and minimizing vibration.

Electrical Connections: Electrical connections should be performed by licensed electricians following electrical codes and regulations.

Water Supply: Ensure an adequate and reliable water supply for the fire pump.

System Piping and Valves: The piping system should be installed following the pump manufacturer’s specifications and relevant standards.

Controls and Monitoring: Install the pump’s control panel and associated instrumentation according to manufacturer guidelines.

Testing and Commissioning: Thoroughly test and commission the fire pump system before placing it into service.

Documentation and Training: Maintain comprehensive documentation of the installation, including drawings, equipment specifications, test reports, and maintenance records.

It is crucial to consult with fire protection professionals, including fire engineers and pump manufacturers, to ensure compliance with all relevant requirements during the installation process. Proper installation is essential for the reliable operation of the fire pump and the safety of the facility and its occupants.

The fire pump is all made of polymer materials, so it has many characteristics such as cleanliness, good safety sealing, corrosion resistance, etc. It is a product that is believed in many fields at present. It has a long service life and can make the best use of it without wasting money. It is suitable for fire-fighting engineering in steel, metallurgy, electric power, petroleum, chemical, construction, port and other operations and emergency water supply for blast furnaces, continuous casting, converters, etc. Water supply works.

Regular training for personnel on the operation and maintenance of fire pumps is crucial for ensuring the reliability and effectiveness of a fire protection system. Training helps personnel understand the system’s components, recognize signs of potential issues, and perform routine maintenance tasks, such as inspecting for leaks, testing alarms, and checking pump alignment. Familiarity with emergency procedures and the ability to respond quickly in case of a fire can significantly reduce response times and prevent further damage. Additionally, well-trained personnel can perform basic troubleshooting, reducing downtime and maintenance costs by addressing minor issues before they escalate. Ensuring that all staff involved with fire pump systems are adequately trained contributes to overall safety and readiness.

EJ fire pump is composed of electric pump + jockey pump
Those pictures display OTS series electric motor pump. OTS double suction split-case centrifugal pump has a wide range of performance, with the ability for a variety of uses.

In fire protection systems that include fire hydrants, jockey pumps play a key role in maintaining the necessary system pressure to ensure hydrants are immediately ready for use. Fire hydrants are typically located throughout a property or a city to provide easy access to water for firefighting efforts. The jockey pump helps maintain a consistent pressure in the piping network that supplies these hydrants, ensuring they are always charged and ready to deliver water when a firefighter opens them. This is especially important in systems with extensive piping networks, where pressure fluctuations could occur due to minor leaks, thermal expansion, or water usage. By keeping the system pressurized, jockey pumps help ensure a rapid response during a fire emergency, providing critical support to firefighting operations.

Assess the water supply: Ensure availability and capacity of your building’s water source.
Identify the fire protection system needs: Consider sprinkler systems, standpipes, or hydrants.
Understand NFPA 20 standards: Choose UL-listed or FM-approved pumps for compliance.
Select the appropriate pump type: Electric, diesel, or jockey pump depending on power reliability and application.
Consider the building size and use: High-rises or industrial facilities require higher-capacity pumps.

Fire sprinkler systems are hydraulically calculated prior to installation to determine adequate water flow and in order to ensure the system can reliably suppress a fire until fire crews arrive. When it’s determined inadequate flow is available from a municipal supply for the system to operate effectively, a fire pump is installed. The fire pump operates when the sprinkler system pressure drops below a certain threshold, due to the operation of sprinkler heads. The fire pump draws additional water from the municipal water supply or on site storage tanks, to maintain the sprinkler systems required operating pressure. Fire pumps are often required in high rise construction and large area buildings, due to the size of piping systems and pressure loss.

In industrial settings, fire pump systems play a crucial role. Efficient and stable fire pump equipment can start quickly during emergencies, providing strong water pressure and flow to ensure effective fire suppression. Our meticulously designed diesel fire pump system features durability and reliability, operating steadily even in harsh environments. The intelligent control panel monitors the equipment status in real-time, ensuring optimal performance. Widely used in chemical plants, power stations, and warehousing logistics, it safeguards fire safety for industrial enterprises.

In today’s era of sustainable building development, an energy-efficient fire protection system has become crucial for safety. Our new integrated electric booster pump combines a high-efficiency electric motor, precision pump, and smart control cabinet, all optimized to achieve the perfect balance between energy saving and stable water supply. This unit not only offers rapid startup and accurate pressure regulation but also significantly reduces energy consumption and operational costs while ensuring continuous fire protection, meeting the modern requirements for green and safe buildings.

Designed with modular construction for easy installation and maintenance, the product uses high-grade corrosion-resistant materials and advanced sealing technology to maintain reliable performance in various extreme conditions. Standardized design and international certifications ensure its broad applicability and dependability in high-rise buildings, commercial complexes, and industrial facilities. Choosing our electric booster pump not only provides robust technical support for emergency fire protection but also drives the intelligent upgrade of green building fire systems, contributing to a sustainable, secure, and environmentally friendly future.

Extreme temperatures, humidity, and corrosive environments can impact fire pump performance. Proper housing, insulation, and corrosion-resistant materials are necessary to protect pumps and ensure reliable operation.

The fire pump set adopts ISW pump, which saves cost and is reasonably priced. This series of fire pump sets are suitable for fire protection occasions such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas, textiles, ships, and oil tankers.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min
The DJ Fire Pump Set is a combination system consisting of a diesel engine pump and a jockey pump, designed for fire safety in the construction and industrial sectors.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min