Diesel engine fire pump set is not limited by power supply

For large fire pumps, diesel fire pumps are presently the hottest fire pumps on the request, especially large storages, jetties, airfields, petrochemicals, power shops, and thawed gas stations, which frequently bear similar large inflow and high power fire pumps. still, unlike the current domestic request, there aren’t numerous professional manufacturers of diesel engine fire pumps, and the models aren’t colorful. As far as XBC- IS diesel engine fire pumps are concerned, it has its own characteristics.

Diesel engine fire pump is more automatic. It is a water pump powered by diesel engine. It is very convenient to use, transfer and install in daily life, and it can be used in time when urgent water supply is needed in various occasions. There are more and more uses, choosing a diesel engine fire pump is a good choice.

Flow：250-10000 GPM
Head： 3-16 Bar
Power：11-1000 kw
The Diesel Engine Split Case Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

       The operation of the Fire Pump Set

     Operation of diesel engine fire pump

     Diesel engine fire pump operation:Start, Stop and Run of the Equipment

Start: first make sure of the correct rotatingdirection of the fire fighting pump and the inlet valve is as N.O and outletvalve N.C. Before the pipe network starts with no water. After no error is found, start the fire-fighting pump and, when the pump gets stable run, gradually open the outlet valve and adjust it to the work condition point for the pump to run. The outlet valve is N.O. when the network is filled with water at usual.
Run: when the pump gets a normal run, check the shaft seal and the bearing to see how it works. Theleakage for themechanical seal should not be over 3 drops/min and for the stuffing seal should be dot drop. The bearing’s temperature should not be over 75℃ and its temperature rise not over 35℃ Stop running for a checking case of an abnormal sound during the pump’s run.
To stop, first close the outlet valve, then the diesel engine.

Diesel engine fire pump, as a fixed fire extinguishing equipment, has been widely used in fire diversion, especially in emergencies such as no power supply or abnormal power supply, it can also be equipped with other diesel engines as power engines according to the needs of users.

All places need to be equipped with fire-fighting facilities, and fire pumps are the water intake equipment for fire-fighting facilities. At least one or two fire pumps are equipped. Our commonly used fire pumps are electric fire pumps and diesel engine fire pumps. The difference between them is that electric fire pumps require power systems. supply. In case of power failure, the diesel engine fire pump can be started at any time to make up for the original position of the electric fire pump.

The diesel engine fire pump has the characteristics of good starting characteristics, strong overload capacity, compact and reasonable structure, convenient maintenance, simple and reliable use, etc. The unit is equipped with protection functions such as overspeed, low oil pressure, three start failures, high water temperature, low oil level, and low battery voltage. Diesel engine fire pump is composed of diesel engine, chassis, cooling water tank and fan, high elastic coupling, water pump, diesel tank and control panel and other equipment. The diesel engine fire pump is directly connected with the diesel engine through a highly elastic coupling or a diaphragm coupling, and is installed on a common channel steel chassis.

Experience efficient fluid transfer with the XBC-XA Diesel End Suction Pump. With its unique end suction design and powerful diesel engine, this pump offers reliable performance and exceptional pumping capacity. It is suitable for a wide range of applications, from industrial fluid transfer to fire protection systems. The XBC-XA Diesel End Suction Pump features automatic operation, advanced control systems, and automatic fault detection for added safety and convenience. Choose this versatile pump for reliable and efficient fluid transfer in various industries.

This is a group of small fire-fighting pump sets, consisting of diesel pumps and jockey pumps, suitable for emergency fire-fighting occasions such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas, textiles, ships, and oil tankers.

The Portable Irrigation Pump is a portable and user-friendly tool used primarily by farmers and gardening enthusiasts for small-scale irrigation in fields, vegetable gardens, and flower beds. With its manual operation, this pump requires no external power source, making it suitable for remote areas lacking electricity or other energy supplies.

Firefighting pumps can be equipped with various accessories and add-ons to enhance their performance and versatility. Common accessories include foam proportioning systems for generating fire-suppressing foam, hose reels for convenient storage and deployment of hoses, suction strainers and filters for protecting the pump from debris, and pressure regulators for controlling the flow and pressure of water.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The XBC-ISO pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

The XBC-OTS Diesel Engine Fire Pump is an essential equipment in firefighting systems, designed to meet emergency firefighting needs. Whether during power outages or in the absence of electricity supply, it provides reliable water supply and increases firefighting water pressure to ensure smooth firefighting operations.The XBC-OTS Diesel Engine Fire Pump finds wide application in various locations and buildings, including factories, commercial buildings, residential complexes, hospitals, airports, ports, and more. Whether serving as the primary firefighting water source or a backup water supply, it offers reliable support to your firefighting equipment and systems.

Flow：80-4000 GPM
Head：3-15 Bar
Power：11-1000 kw
The Diesel Single-stage Single-suction Fire Pump is a versatile solution suitable for a wide range of applications. From hotels, hospitals, and sports arenas to chemical plants, refineries, metallurgical facilities, energy plants, and pharmaceutical companies, this pump set ensures reliable fire protection. It is also ideal for shopping malls, commercial complexes, office buildings, and high-end residential towers. Whatever the setting, the Diesel Single-stage Single-suction Fire Pump delivers dependable performance to safeguard lives and properties from fire risks.

Centrifugal End Suction Pump Is A Single Stage, Single Suction Pump For Pumping Clean Water And The Other Liquids Physically And Chemically Similar To The Clean Water. This Pump Is Suitable For Public Water Supply And Drainage Duties In Industries And Land Irrigation Also In Agriculture.

Diesel fire water pumps are usually used as backup facilities. Therefore, only when a signal comes, and the electric water pump fails or the power supply is cut off, it will automatically start. When it has an ultra-low pressure pump starting device, its matching electric water pump control cabinet should also have an ultra-low pressure pump starting device, and the lower limit of the pump should have a certain pressure difference. Of course, we can also design a control system according to customer requirements.

Fire pump is a kind of water pump widely used in environmental protection, sewage treatment and fire fighting units. It is similar to the general pump, but its head and total flow are different. And the pump can also be divided into single-stage and multi-stage two forms according to the structure.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The XBC-ISO pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more.

Now the general diesel engine fire pump set is powered by imported or domestic Cummins, Wuxi Power Engine Factory and other diesel engines produced by large-scale key enterprises in the internal combustion engine industry at home and abroad, through highly elastic couplings or diaphragm couplings produced by professional manufacturers. The engine is directly connected with the water pump, and the power of the diesel engine can reach 880KW. It can be equipped with water pumps of different lifts and flow rates for customers to choose and use according to different needs.

The diesel engine fire pump set has the characteristics of good starting characteristics, strong overload capacity, compact and reasonable structure, convenient maintenance, simple and reliable use, etc. The unit is equipped with protection functions such as overspeed, low oil pressure, three start failures, high water temperature, low oil level, and low battery voltage. At the same time, it can be connected with the customer’s automatic fire alarm device or the fire control system control cabinet produced by our factory to realize the function of remote monitoring.

The fire pumps used in diesel engine fire pump sets can be IS series single-stage type, S series new single-stage double-stage type, and D-type series segmental multi-stage type produced by our company. The diesel engines used in this series of equipment are domestic or imported products, which have the characteristics of good starting characteristics, strong overload capacity, compact structure, convenient maintenance, simple use, and high degree of automation. It is a reliable fire-fighting equipment.

Diesel engine fire pumps can easily change the head, so that the efficiency of the device can also be greatly improved. Diesel engine fire pumps can be adapted to work in different working media and media at different temperatures by changing the material or coating with a special protective layer. The diesel engine fire pump occupies less area, and the vibration and noise of the diesel engine fire pump is relatively small.

Diesel engine fire pump as a common must use facilities, only in the fire signal to come, and electric pump failure or power failure, diesel engine fire pump will automatically start, widely used in environmental protection, water treatment and fire departments to transport a variety of liquids.

Portable pump, mostly used for irrigation and port dock pumping water. Is a small diesel pump, now many countries began to use a large range of portable diesel pump, because the diesel pump is not affected by the power system, can work in an electric environment, and portable diesel pump is easy to install and move, is favored by the majority of customers.

It can be started without electricity to replace the electric pump to complete the work，The viscosity is higher than that of gasoline, which is not easy to evaporate and saves fuel.The pressure and flow range of the equipment can meet the needs of all fire-fighting occasions.

XBC series diesel engine fire pump is a new type of fire fighting equipment developed on the basis of supporting fire pump (single-stage single-suction type, single-stage double-suction type and segmented multi-stage type). It can be divided into several series. The equipment has a wide pressure and temperature range and can be used in almost every occasion required for fire protection. The diesel engine matched with this equipment is an excellent domestic or imported product, which has the characteristics of good starting performance, strong overload capacity and compact structure. , easy to maintain and use, high degree of automation.

The Handheld Diesel Engine Fire Pump is a fire pump package with resource and light diesel engine components. The hand-held diesel engine fire pump unit is composed of light gasoline engine or diesel engine and fire pump system supporting facilities. The space layout should be reasonable, the structure should be compact, the volume should be small, the net weight is ≦100kg, the vacuum pump sealing performance is ≦2.6kPa, Main parameters such as maximum vacuum value≧85.0kPa, water intake time≦35.0s, etc. The whole equipment is composed of centrifugal water pump, water extractor, motor gasoline, diesel engine and other components.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The Diesel Engine End Suction Fire Pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more. This firefighting pump set is equipped for emergency rescues and can operate efficiently even during power outages. Moreover, its end-suction design simplifies operation and saves installation time.

XBC-D Diesel Fire Pump Set is a versatile and reliable firefighting solution designed for a wide range of applications. Whether it’s industrial facilities, commercial buildings, residential complexes, or public infrastructure, the XBC-D Diesel Fire Pump Set ensures effective fire protection. With its robust design and advanced features, this pump set is ready to tackle emergencies and safeguard lives and properties in various firefighting scenarios.

Flow：50-5000 GPM
Head：3-16 Bar
Power：11-1000 kw
Frequency：50 or 60 Hz
The XBC-ISO pump set is suitable for emergency firefighting scenarios, particularly ideal for high-rise water supply, building firefighting, central air conditioning water circulation, industrial process system circulation, cooling systems, boiler water supply, industrial water supply and drainage, water plant supply, irrigation in plantations, and more. This firefighting pump set is equipped for emergency rescues and can operate efficiently even during power outages. Moreover, its end-suction design simplifies operation and saves installation time.

The Diesel Engine with Mixed Flow Pump is an advanced firefighting and rescue equipment. This combination consists of a robust diesel engine and an efficient mixed flow pump, offering advantages such as independent power supply, high performance, agile mobility, versatility, and cost-effectiveness. During sudden fire emergencies, the Diesel Engine with Mixed Flow Pump operates autonomously, requiring no external power source, and rapidly provides a substantial water supply to minimize fire damage. Its exceptional mobility allows firefighters to swiftly transition and address ever-changing disaster scenarios. It is suitable for various environments, especially in areas with unstable power supply, where it maintains its peak efficiency. Moreover, this equipment is cost-effective, easy to maintain, and offers long-lasting firefighting assurance.