500gpm 80m EEJ Fire Pump Set

What is Water Hammer?
A sudden increase in water pressure caused by rapid valve closure or pump shutdown, leading to:

Pipe vibrations and damage.
Pressure surges that can exceed system limits.
Component wear and potential pump failure.
Prevention Methods:
Use slow-closing valves to prevent sudden pressure changes.
Install surge arrestors or expansion tanks to absorb pressure spikes.
Ensure proper pump start/stop sequences to reduce shock loads.

Fire pumps are often required to have backup power sources, such as diesel generators or uninterruptible power supplies (UPS), to ensure they function during power outages.

The conventional electric pump is the main pump, the diesel engine pump is the backup pump, and the jockey pump plays a role in the stabilization of the whole system. When the electric pump fails or the mains is cut off, the control cabinet will receive the pressure gauge from the electric contact. When the signal comes, the diesel engine pump will be started within 5 seconds, and the rated working condition will be reached within 20 seconds to ensure the normal operation of the fire extinguishing work.

High flow single-stage centrifugal pump, ideal for clean water and firefighting applications, offering stable flow, high head, and low energy consumption for reliable water supply.

1. Jockey pump
2. Suction piping
3. Fire pump
4. Discharge piping
5. Pressure switch
6. Pressure gauge
7. Check valve
8. Control panel
9. Alarm system
10. Bypass valve
11. Priming chamber (if applicable)
12. Backflow preventer (if applicable)

The lower the pumping head of the fire pump, the smaller the motor load. Under the misleading of this kind of misunderstanding, when purchasing a water pump, the head of the water pump is often selected to be very high. In fact, for centrifugal water pumps, when the pump model is determined, the power consumption is proportional to the actual flow of the pump. The flow rate of the water pump will decrease with the increase of the head, so the higher the head, the smaller the flow rate and the smaller the power consumption. Conversely, the lower the lift, the greater the flow and the greater the power consumption. Therefore, in order to prevent the motor from overloading, it is generally required that the actual pumping head of the pump should not be lower than 60% of the calibrated head.

The fire pump is part of the water supply of the fire sprinkler system and can be powered by electricity or diesel. The inlet of the pump is connected either to a public groundwater supply or to a static water source (e.g. tank, reservoir, lake). The pump supplies water at higher pressure to the sprinkler system risers and hose risers.
Fire pumps generally use three driving forces, including diesel engines, gasoline engines and electric motors. Gasoline engines are commonly used in portable fire pumps and light duty firefighting. Electric motors are the most widely used driving force for fire pumps and are both efficient and convenient.

Fire pump equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

The electric motor fire pump is an important water supply equipment in the fire protection system. The electric motor fire pump has a wide range of head, flow and power, and can be used in many environments. Providing sufficient water supply is the key to ensure emergency use.

– Renewable Energy Integration: Utilizing renewable energy sources, such as solar or wind, to power fire pump systems.
– Real-Time Data Sharing with Smart Grid: Enabling real-time data sharing with smart grid infrastructure for enhanced fire protection.
– Automated Control and Optimization: Using smart grid technology for automated control and optimization of fire pump operations.
– Compliance with Renewable Energy Standards: Adhering to fire safety regulations and standards for smart grid and renewable energy systems.

This horizontal split case centrifugal fire pump is a high-efficiency, stable, and reliable firefighting solution designed to meet high-flow demand in large buildings and industrial facilities. Its unique double-suction design delivers higher flow rates and outstanding hydraulic performance, significantly enhancing fire suppression efficiency. Constructed with thickened cast iron, the pump is corrosion-resistant and pressure-resistant, ensuring durability in harsh environments. It can be driven by either an electric motor or diesel engine, offering flexible installation options. Widely used in high-rise buildings, airports, ports, power plants, petrochemical sites, and warehouses, this pump is a vital component for rapid response and effective firefighting.

100gpm 8bar small fire pump set test for Rwanda client

This is the three times client place order for us

3 set 100gpm 8bar EDJ fire pump set 

250gpm bar EDJ fire pump 

100gpm 10bar EDJ fire pump set 

The fire pump is mainly a kind of pump equipment used for fire emergency, and its function is to transport the water source to the fire scene for fire fighting. In life, fire pumps are widely used in various buildings, such as factories, docks, warehouses, ports and other places, and are important equipment for fire emergency.

The application of fire pumps is not only in fire protection systems, but a variety of fire pumps are gradually showing their superior strength in industrial production and urban construction. This includes the implementation and expansion of high-end technologies for industrial and urban water supply and drainage, and high-rise water supply under pressure.

Learn how to diagnose and fix common issues when your fire pump fails to start.

As usual, Fire pump system include Diesel engine pump + Electric motor pump+Jockey pump. Sometime, it just include Electric pump+Jockey pump.
Its power: 1.0 to 20kw, flow: 15-300gpm, head: 3-10bar, 50/60hz. The material: Cast iron or SS, bronze impeller.

Discover the importance of automatic start functions in fire pumps for rapid emergency response and NFPA 20 compliance.

The fire pump set is composed of electric pump + diesel pump + jockey pump. It is a set of 750gpm@90m pump set, which is manufactured in strict accordance with the NFPA20 standard.
The fire pump adopts XA pump, the product combines the advantages of similar products at home and abroad, and adopts the excellent hydraulic model design. Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operating cost of the pump in various applications. The fire pump group of this group is not affected by the mains. When the electric pump fails, the diesel pump will automatically start to operate.

Fire pump components:
1. Diesel pump: the flow rate is the same as that of the electric pump. It connects pump sets with highly elastic couplings or universal joints.
2. Pipeline supplementary pressure pump: vertical, small flow, higher lift than electric or diesel pumps.
3. Control panel: Automatically control the water pump with overload and overcurrent protection.
4. Accessories: suction pipe, discharge pipe with flange, battery, gate valve, check valve, flexible expansion joint, pressure switch, pressure gauge, base, etc.

The diesel engine fire pump and the electric fire pump are “one standby and one use”. The control boxes of the diesel engine fire pump and the electric fire pump should be kept independent of each other, and the diesel engine fire pump must be used as the backup pump of the electric fire pump, and cannot be used as backup for each other.

The pump start signal in the fire extinguishing system is directly connected to the electric fire pump control box, and it is not suitable to be connected to the diesel engine fire pump control box at the same time. The pump start fault signal of the electric fire pump control box and the pump start signal in the fire extinguishing system are used as the automatic start pump start signal of the diesel engine fire pump control box, and the line is connected to the control box of the diesel engine fire pump. The pump start failure signal of the diesel engine fire pump control box received an alarm from the fire control center. After receiving the alarm, the authorized personnel rushed to the pump room to force the diesel pump to start in an emergency.

The fire pump is mainly used to deliver water in the fire system. As an indispensable tool for the fire system, the fire pump has the characteristics of simple structure and stable performance. Due to these advantages of high performance and low energy consumption, the safety and efficiency of the fire pump are far ahead of the pipeline tools of the same purpose.

Double power fire pump is mainly composed of electric fire pump, diesel fire pump and regulator pump, in no power supply or power supply (mains) is not normal will start the diesel fire pump, to ensure the fire water supply in these unexpected circumstances.

Discover the advantages of diesel-driven fire pump systems with independent operation, ideal for power outage scenarios and remote emergency response. Learn how these high-performance pumps ensure uninterrupted water supply for fire protection in industrial, commercial, and off-grid environments.

A fire pump is a critical component of a fire sprinkler system. It is designed to increase water pressure and flow for firefighting. It works by drawing water from a reliable source and boosting its pressure to ensure effective water distribution through sprinklers or hoses.

Yes, modern fire pumps typically come with safety shutoff features to prevent damage from overheating, low oil pressure (for diesel pumps), or running dry. These features are designed to protect the equipment and prolong its life, though in critical applications, it’s vital that shutoff mechanisms do not compromise firefighting capabilities.

This electric fire pump system features an integrated design that combines the pump, motor, control panel, pressure tank, and other core components on a single base. Its compact structure minimizes the footprint, making it ideal for space-sensitive installations.
Fully assembled and tested before delivery, this unit only requires connection to inlet/outlet pipes and a power source on-site—enabling fast and easy commissioning while significantly reducing installation time.
The intelligent control panel supports automatic start/stop, pressure monitoring, and fault alarms, offering high stability and quick response. It is especially suitable for commercial buildings, residential complexes, and industrial facilities that demand high fire protection performance and system reliability.
This is an efficient, safe, and easy-to-install solution tailored for modern fire safety systems.

Diesel engine fire pumps are relatively common in life, and their performance requirements are relatively high. In ordinary use, more attention should be paid to maintenance, so as to prolong the service life of the pump. Because diesel fire pumps are not omnipotent, there will be some problems in daily use, so when choosing equipment, we must pay attention to whether the quality of the equipment meets the national standards. As fire equipment, all kinds of equipment must be To ensure performance, avoid affecting use in disaster situations and delaying rescue.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Non-UL Flow：30-9000 GPM
Non-UL Head： 3-20 Bar (40-300 psi)
UL Flow：50-3000 GPM
UL Head： 5-20 Bar (72.5-290 psi)
The EDJ Fire Pump Set includes diesel engine pumps, electric pumps and jockey pumps.

Fire pump system is made of two Electric+Diesel+Jockey pump
The main eletric components is CHNT . If schneider or other brand electrical are need, should mention it before place the order
Diesel pumps can use vertical in- line pumps, horizontal end-suction pumps,vmultistage pumps, horizontal multi-stage pumps, split casing pumps and so on according to diffenent flow and head of customers