Home » Diesel engine fire pump » Can the diesel engine fire pump run for a long time?

Can the diesel engine fire pump run for a long time?

Whether the diesel engine fire pump can run for a long time, the rescue of fire accidents is very important, of course, it is hoped that the fire fighting equipment can run safely for a long time. Diesel engine fire pump principle principle When all equipment is in normal operation, the switch should be set in the automatic position, and all operation signs are simple and clear.

Rated 5/5 based on 476 customer reviews
Share:
Content

Frequently asked questions about fire pumps:
1. Before starting, check whether the fire pump can start normally, whether there is any stuck fault phenomenon; whether the position information of the impeller is normal; whether the cable and the cable connection plug are broken, scratched and broken.
2. When the fire pump fails, it cannot be disassembled by itself. Because many people don’t know where the fault is, it causes random disassembly, which may also damage the original good parts.
3. Storage during non-use During non-use, the fire pump should be drawn out of the water source immediately, and the water in the pump should be drained, especially in the cold winter, it should be placed in a dry place.

Inquiry


    More Diesel engine fire pump

    Generally speaking, we recommend that where natural ventilation is used to install diesel engine fire pumps, there must be vents and exhaust ports of sufficient size, and the position of the vents ensures that there is enough fresh air to supply the diesel engine for combustion within the temperature limit. Of course, the water supply radiator can also be used to take away the heat of the circulating cooling water and the heat emitted from the surface of the unit. If the space cannot meet the requirements of natural ventilation and cannot effectively dissipate heat, it is recommended that you adopt forced ventilation, install an intake fan and an exhaust fan at the vent, and choose a location that can provide enough cold air for the diesel engine and take away the machine room hot air inside. Generally speaking, the air intake of the unit should be 6-7 times that of the diesel engine. Only in this way can normal ventilation be ensured and the operating efficiency of the equipment can be improved.

    In addition, it must be fixed firmly so that the entire unit can be supported to ensure that the unit is in a horizontal state and absorb vibration. Generally speaking, the foundation of the unit adopts a concrete structure. The length and width are 150-250mm on one side of the length and width of the unit chassis, and the depth is 300-600mm. The height of the anchor bolts should be about twice the bolt diameter. And there should be a 750mm channel on both sides and front of the unit to facilitate the operator’s inspection and general maintenance.