EDJ fire pump package without suction welding mainfold pipe

Zjbetter Brand Fire Pump Skid 500 gpm @7 bar with cummins diesel engine 46 kw shipped to Tanzania got a high value in Africa market.

Outline the specific installation requirements for fire pumps, such as space considerations, accessibility, and adherence to NFPA 20. Explain how correct installation ensures reliability and ease of maintenance, and discuss the importance of proper alignment, securing power sources (for electric pumps), and ventilation (for diesel pumps).

High-efficiency electric fire pump sets designed for lower energy consumption, stable pressure output, intelligent control, and reliable performance in modern fire protection systems.

1. Verify that the fire pump is correctly sized for the building’s fire protection system.

2. Ensure that the fire pump is installed in a location that is accessible for maintenance and operation.

3. Ensure that the fire pump is properly electrically grounded and has a dedicated power source.

4. Verify that the fire pump is connected to the water supply system in accordance with local codes and regulations.

5. Ensure that the fire pump is installed in accordance with the manufacturer’s instructions.

6. Install a controller to automatically start and stop the fire pump as needed.

7. Ensure that the fire pump is tested to meet local codes and regulations.

8. Verify that the fire pump is properly maintained and inspected on a regular basis.

A fire pump starts when the pressure in the fire protection system drops below a set threshold, indicating water flow caused by sprinkler activation or manual use of a fire hose. The pressure drop is detected by pressure-sensing devices, triggering the fire pump to activate and provide adequate water pressure.

70m3/h@60m Fire pump set test
We manufacture in strict accordance with customer requirements. All products will be tested before leaving the factory to ensure that there are no problems. The design meets the national standard of general packaging, meets customer needs, and standard handling and transportation.

High flow single-stage centrifugal pump, ideal for clean water and firefighting applications, offering stable flow, high head, and low energy consumption for reliable water supply.

The fully automatic electric pump set offers an integrated and efficient fire water supply solution, ideal for modern buildings, high-rises, and industrial facilities. It features smart control, stable pressure, and energy-saving performance for enhanced fire protection.

There are many types of fire-fighting equipment, fire hydrants and fire extinguishers are a common category, and there is also a category of fire pumps, which can be described as the heart of the fire-fighting system and play an important role in pressurising the water supply for the fire-fighting system. Among the many fire pump products, fire pumps can be divided into multi-stage and single-stage fire pumps.

Multi-stage pumps have high efficiency, corrosion resistance, reliable operation and other properties, strong bearing capacity of the pump body, strong resistance to overload and more sensitive start. Ltd. introduces you to the relevant features of multi-stage pumps. First of all, Shanghai Xizhiquan multi-stage pumps have a compact structure, with small spacing between parts and small volume. The equipment runs smoothly, has a long service life and produces less vibration during operation, so the practical life of the equipment is correspondingly long.

With its unique structure, the direction of the water inlet and outlet can be adjusted according to different needs, so it is suitable for various place environments. The direction of the inlet and outlet is horizontal, which reduces the number of bends in the pipeline connection, thus simplifying the pipeline connection and greatly enhancing the efficiency of the fire fighting system.

The efficient operation of the multistage pump is used in many larger, more demanding fire-fighting locations. Its role is mainly to play a role in the fire fighting pipeline system to pressurise and send water, multi-stage pumps are not only suitable for all kinds of fire fighting systems, but also for industrial drainage, high-rise building water pressure supply, long-distance water delivery, water circulation pressure and other occasions.

The fire pump is mainly used for various fire hydrants and spray fire main pumps. It is also suitable for various fire booster and pressure stabilizing pumps. It is also suitable for various villas, residential areas and other fire protection systems, industrial and civil The building fire protection system is also suitable for various oil depots, oil loading and unloading docks, logistics parks and other places with high fire protection requirements.

The EJ fire pump set consists of an electric pump and a jockey pump. The electric pump adopts an XA pump, and the jockey pump adopts a CDL pump. The flow rate of this pump is 500gpm and the lift is 130psi. It is manufactured in strict accordance with customer requirements. It is cast iron, the impeller of the electric pump is made of cast iron, the pressure jockey pump is made of stainless steel, and the seals of the pumps are all mechanical seals, which will not leak.

Fire pump components:
1. Diesel pump: the flow rate is the same as that of the electric pump. It connects pump sets with highly elastic couplings or universal joints.
2. Pipeline supplementary pressure pump: vertical, small flow, higher lift than electric or diesel pumps.
3. Control panel: Automatically control the water pump with overload and overcurrent protection.
4. Accessories: suction pipe, discharge pipe with flange, battery, gate valve, check valve, flexible expansion joint, pressure switch, pressure gauge, base, etc.

The fire pumps used in the complete set of diesel engine fire pumps can be the IS series single-stage type, the S series new single-stage two-stage type, and the D-type series segmental multi-stage type produced by our company. The diesel engine water pumps used in this series of equipment are made of domestic or imported high-quality products. They have the characteristics of good starting characteristics, strong overload capacity, compact structure, convenient maintenance, simple use, and high degree of automation. They are advanced and reliable fire-fighting equipment.

30 HP EJ fire pump package dispatch to Manila
It is made of one electric pump 150gpm 150 psi and one jockey pump with 8gpm 160 psi
Also include controller and pipe syetem
It is the clients 4 times order for Better Technology Group

Diesel engine-driven fire pumps have the advantages of independent power, efficient water supply, durability and stability, and intelligent control. They can still operate reliably in power outages and are widely used in high-rise buildings, petrochemicals, power plants, and large industrial sites, providing a continuous and safe high-pressure water source for fire protection systems.

High-viscosity single screw fire pump designed for continuous and stable output, providing strong self-priming, wear resistance, low pulsation, and reliable long-term operation for industrial and fire protection applications. Perfect for complex fluids, harsh environments, and demanding systems requiring consistent pressure and uninterrupted flow.

The integrated fire pump unit features a compact design, space-saving structure, reduced installation and maintenance costs, and intelligent control. Ideal for urban buildings, industrial zones, and special environments, it’s the optimal choice for modern fire protection systems.

Product Introduction of EDJ Fire Pump System
1. Electric pump, can use single stage pump, horizontal split case pump, end suction pump, multistage pump, material can be cast iron, stainless steel, and bronze impeller 
2. Diesel engine pump, with capacity and head equal to electric pump, with fuel tank, water tank，fan, control box
3. Jockey pump, horizontal or vertical, capacity will be small, but head should be higher than electric and diesel engine pump
4. Control panel: Auto Control of electric pump, diesel engine pump and Jockey Pump with overload, over current protection。
5. Accessories: check valve, gate valve, pressure vessel, generally 0.6mpa, 1.0mpa, 1.6mpa, Pressure Gauge, Pressure Sensor, Common Pipe for Suction and Discharge, Flexible Joints and Flanges, Common Base plant

The Fire Pressure Stabilization Equipment, coupled with the CDL Vertical Multistage Fire Pump, offers a comprehensive solution to elevate fire safety measures. This powerful combination ensures a consistent water pressure for effective fire suppression. By incorporating pressure stabilization technology, this system guarantees an uninterrupted fire water supply, efficient water distribution, and reliable operation of fire hydrants and sprinkler systems. With advanced infrastructure and the ability to maximize firefighting capabilities, this configuration significantly enhances overall fire safety standards. Investing in fire pressure stabilization equipment is a proactive step towards ensuring superior fire protection and providing peace of mind in critical situations.

Regular maintenance is crucial for ensuring the reliability of firefighting pumps. This includes checking and changing oil, inspecting hoses and connections, testing the pump regularly, and following the manufacturer’s maintenance guidelines.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min
The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations.

Discover our integrated diesel fire pump system designed for outdoor industrial fire protection—delivering smart control, high performance, and reliable emergency water supply.

High-temperature resistant fire pumps use advanced technology and high-quality materials to operate steadily in extreme heat. Their efficiency, energy-saving features, intelligent control, and durability ensure reliable fire emergency response, enhancing firefighting effectiveness and safety.

Flow: 30-9000 GPM
Head: 3-20Bar
Speed: 740-2900r/min
Material: HT200, SS304, Bronze

The EJ Fire Pump Set is combined an electric pump and a jockey pump.

Discover the ZJ-Better 304 stainless steel submersible sewage pump — engineered for superior corrosion resistance, reliable drainage, and long-lasting performance in harsh industrial and wastewater environments.

The fire pump is actually a pump that needs to be used in fire protection. According to different classification methods, it can be divided into different types of pumps. With its characteristics of full sealing, no leakage and corrosion resistance, it is widely used in environmental protection, water treatment, fire protection and other departments to pump various liquids. The pump types of the system are similar, but the head and flow are different. The selection basis of the fire pump should be considered from five aspects according to the technological process and water supply and drainage requirements. Fire truck fire pumps are used in fire protection, water treatment, environmental protection and other departments to pump various liquids.

Diesel-driven fire pumps provide a reliable alternative to electric-driven pumps, especially in areas prone to power outages. They offer independent operation without relying on the building’s electrical supply and are often used in remote locations or where backup power is essential.

The function of diesel fire pump is very powerful, we can set the control time during use, for example: preheating in advance, preparatory lubrication or timing start. The use of high-tech has made some complicated and time-consuming things easier in the past. The preheating setting greatly reduces the preparation time for rescue, allowing firefighters to rescue the first time. In the face of disasters, time is money and time. is life.

In critical moments, a stable water supply is the lifeline of fire safety. This dual-drive fire pump system, equipped with both a diesel engine and an electric motor, ensures uninterrupted water pressure even during power outages or emergencies. With its compact structure and space-saving design, the unit offers quick modular installation and is ideal for high-rise buildings, underground parking garages, industrial facilities, and petrochemical storage areas where system reliability is paramount.

The system features an intelligent control panel with automatic power source switching, one-click start/stop operation, and real-time status monitoring—minimizing the need for manual intervention. Even under extreme conditions, this system delivers fast response and consistent performance, making it an essential part of any modern fire protection setup.

Electric fire pumps are used in various water environments, not only to meet the general water supply but also to be a good helper for fire-fighting water. The electric fire pump is manufactured with good structure and workmanship. It has a wide range of performance, and is easy to use and operate for a long time. The motor fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.