Nine Sets Of Standard EDJ Fire Pump Sets Exported To Ethiopia

Air in a centrifugal pump usually occurs because of a suction issue. Air can be introduced into the pump either because of a piping issue, such as low water level, or an internal issue, such as incorrect impeller clearance. To prevent air from entering the inlet pipe and pump body, the piping should be checked to ensure it is properly sealed and the pump should be regularly inspected to check impeller clearance.

Fire sprinkler systems are an important part of life safety in buildings. International building codes allow some exceptions when buildings are “fully watered”, such as reducing rated spacing, reducing hydrant flow requirements, increasing exit travel distance, and increasing building height and area. These exceptions are allowed so that in the event of a fire, the sprinkler system will suppress the fire enough that occupants can safely evacuate the building and that the spread of the fire is contained before the fire department has fully arrived to extinguish it.

30 HP EJ fire pump package dispatch to Manila
It is made of one electric pump 150gpm 150 psi and one jockey pump with 8gpm 160 psi
Also include controller and pipe syetem
It is the clients 4 times order for Better Technology Group

Prior to installation, fire sprinkler systems are hydraulically calculated to ensure adequate water flow and that the system can reliably suppress a fire until fire crews arrive. When it is determined that there is insufficient flow from a municipal supply for the system to function properly, a fire pump is installed. The fire pump activates when the sprinkler system pressure falls below a certain threshold as a result of sprinkler head operation. To maintain the required operating pressure of the sprinkler system, the fire pump draws additional water from the municipal water supply or on-site storage tanks. Due to the size of piping systems and pressure loss, fire pumps are frequently required in high rise construction and large area buildings.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations.

EDJ series fire pump set consists of electric pump + diesel pump + jockey pump and all accessories.
The dual power fire pump pressure switch and control cabinet can automatically turn on/off the three pumps – the electric pump and the jockey pump work when there is electricity, and the diesel pump when the power is off.
Flow range: 50-5000 GPM
Pressure range: 4-14 bar
Power range: 4-325 KW

1. Export: All fire pump components should be carefully inspected and packed to ensure that they meet all applicable export laws and regulations. All components should be properly marked or labeled to be easily identified even in a foreign country.

2. Import: The importing country may require certain types of documents to be presented with the fire pumps. These documents may include an export permit, a commercial invoice, a packing list, or perhaps even an insurance policy. If exporting to a foreign country, a customs clearance may also be required.

3. Regulatory Requirements: Fire pump components may fall under certain regulatory requirements, either imposed by the importing country, or by the country of origin. It is important to check with the relevant regulatory authorities to ensure that the equipment meets all applicable regulations.

4. Certification: Depending upon the type of pump being imported, or exported, certain certification may be required. Certification of fire pumps may include UL or ITU ratings, as well as other safety or performance criteria. It is important to comply with all such regulations to ensure the safety of the installed fire pump system.

25≤Q≤100GPM
30≤H＜120m

The minimum fire rated pressure of EDJ small fire fighting package set water supply equipment is 3 bar, and the minimum fire rated capacity is 25 GPM. EDJ small fire fighting package set water supply equipment includes at least two power or power source driven pumping units, pressure tanks, pipes, valves and accessories, measurement and control instruments, control cabinets, outdoor rain cover, etc.

ZJBetter provide three types of fire pump system, such as diesel engine fire pump set, electric driven fire pump set, EDJ fire pump set.

A diesel engine fire pump is a type of fire-fighting equipment with reliable performance. Even so, when using the equipment, we must still adhere to its prescribed safety operating procedures to avoid any unnecessary issues.

There are many types of fire-fighting equipment, fire hydrants and fire extinguishers are a common category, and there is also a category of fire pumps, which can be described as the heart of the fire-fighting system and play an important role in pressurising the water supply for the fire-fighting system. Among the many fire pump products, fire pumps can be divided into multi-stage and single-stage fire pumps.

Multi-stage pumps have high efficiency, corrosion resistance, reliable operation and other properties, strong bearing capacity of the pump body, strong resistance to overload and more sensitive start. Ltd. introduces you to the relevant features of multi-stage pumps. First of all, Shanghai Xizhiquan multi-stage pumps have a compact structure, with small spacing between parts and small volume. The equipment runs smoothly, has a long service life and produces less vibration during operation, so the practical life of the equipment is correspondingly long.

With its unique structure, the direction of the water inlet and outlet can be adjusted according to different needs, so it is suitable for various place environments. The direction of the inlet and outlet is horizontal, which reduces the number of bends in the pipeline connection, thus simplifying the pipeline connection and greatly enhancing the efficiency of the fire fighting system.

The efficient operation of the multistage pump is used in many larger, more demanding fire-fighting locations. Its role is mainly to play a role in the fire fighting pipeline system to pressurise and send water, multi-stage pumps are not only suitable for all kinds of fire fighting systems, but also for industrial drainage, high-rise building water pressure supply, long-distance water delivery, water circulation pressure and other occasions.

The DJ fire pump set consists of a pump connected to the diesel engine, jockey pump, pressure vessel, controller for manual or automatic operation of the system and standard accessories mounted on the base. The fire pump system can be customized for different uses, such as high-rise buildings, facilities, hospitals, supermarkets, shopping malls, villas, apartments, etc. This fire pump set can be used in fire hose and fire hose reel systems, fire sprinkler systems, fire water monitoring systems, fire alarm systems and fire hydrant systems.

The DJ Fire Pump Set is a combination system consisting of a diesel engine pump and a jockey pump, designed for fire safety in the construction and industrial sectors. This system utilizes the powerful power output of the diesel engine pump, ensuring reliable operation even in the event of a power outage. The jockey pump maintains a constant water pressure, optimizing the performance of the fire suppression system. The DJ Fire Pump Set offers a reliable and efficient solution for prompt response to fire incidents, making it an essential component for protecting property and ensuring occupant safety.

EDJ series fire pump set consists of electric pump + diesel pump + jockey pump and all accessories.
The pressure switch and the control cabinet can automatically turn on/off the three pumps, the electric pump and the pipeline pressure pump work when there is electricity, and the diesel pump is started when the power is off.
Flow range: 50-5000 GPM
Pressure range: 4-14 bar
Power range: 4-325 KW

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

The fire pump has the characteristics of simple structure and stable performance, and because of its high speed and relatively small volume, its efficiency is indeed high. It is precisely because of these advantages of high performance and low energy that the safety and efficiency of the fire pump are in the same use. Leading the pipeline tools.

Fire pumps are more commonly used in commercial and industrial settings. Residential buildings often rely on municipal water pressure for fire protection. However, in some cases, residential structures with specific design requirements may incorporate fire pumps.

The electric pump of the EDJ fire pump group is the main pump, the diesel engine pump is the backup pump, and the jockey pump plays a role in the stabilization of the whole system. When the electric pump fails or the mains is cut off, the control cabinet will receive electricity from the The signal from the contact pressure gauge will start the diesel engine pump within 5 seconds, and reach the rated working condition within 20 seconds to ensure the normal operation of the fire extinguishing work.

Because of the width required by our customer, this fire pump set is designed in in-line. Capacity and total head are 34m³/h@8bar.

Fire pumps are mainly used for pressurized water delivery in firefighting system pipelines, and can also be used in industrial and urban water supply and drainage, high-rise building depressurized water delivery, long-distance water delivery, heating, bathroom, boiler cold and warm water circulation pressurized air conditioning refrigeration system water delivery and equipment matching, etc.

The products are packed in wooden cases, which are light in weight, whole core, frosted and formaldehyde free. Shipping remark can be made for free. Good packaging is the quality guarantee during the transportation of products.

For supplying water to automatic fire fighting systems and installations with hydrants. Fire pumps are part of the water supply to a fire sprinkler system and are powered by electricity, diesel or steam. It is used to extinguish fires over a period of time.
The fire pump is equipped with a control panel where you can adjust the flow of water and its power.
It is the most important part of fire protection system safety, in order to ensure the safety of people inside buildings, schools, ministries, hospitals, markets, shops, factories, malls or any infrastructure, a fire pump system must be installed to prevent the fires they enter.
There are different types of fire pumps with different operations and capacities, for example; vertical and horizontal fire pumps powered by electric or diesel.

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

As a fixed fire-fighting equipment, the diesel engine fire-fighting pump set has been widely used in fire-fighting diversion, especially for fire-fighting water supply in unexpected situations such as no power supply or abnormal power supply (mains power). The water pumps in the unit are horizontal single-stage and multi-stage fire pumps produced by our company, which are mainly composed of diesel engines, fire pumps, coupling devices, fuel tanks, radiators, battery packs, intelligent automatic control panels, etc.

The diesel engine equipped with the equipment is made of domestic or imported products. It has the characteristics of good starting characteristics, strong overload capacity, compact structure, convenient maintenance, simple use, and high degree of automation. It is an advanced and reliable fire-fighting equipment.

The application of fire pumps is not only in fire protection systems, but a variety of fire pumps are gradually showing their superior strength in industrial production and urban construction. This includes the implementation and expansion of high-end technologies for industrial and urban water supply and drainage, and high-rise building underpressure water delivery.

Flow: 30-9000 GPM
Head: 3-20Bar
Speed: 740-2900r/min
Material: HT200, SS304, Bronze
The EJ Dual Power Fire Pump System is an innovative and reliable fire protection solution. Combining an electric pump for robust water pressure and flow with a top-quality jockey pump for stable pressure maintenance, this system ensures efficient and timely water supply during fires. With advanced automation, remote monitoring, and energy-saving features, the EJ Dual Power Fire Pump System is a trusted choice for commercial, industrial, and residential applications.

The two main starting and control methods for fire pumps are manual starting and automatic starting.

Manual Starting: Manual starting is the simplest and most commonly used method for starting a fire pump. It involves the use of a manual start switch or lever to start the pump motor.

Automatic Starting: Automatic starting is the most reliable method for starting a fire pump. It involves the use of a control panel, which can be programmed to start the pump motor when a drop in pressure is detected. The control panel also monitors the pump’s performance and can be used to shut off the pump if it fails to start or is not performing properly.

1. Increase the suction head: Increasing the suction head, or the vertical distance between the suction inlet and the centreline of the impeller, can reduce the chances of cavitation.

2. Increase the impeller speed: Increasing the impeller speed can also reduce the chance of cavitation.

3. Install an air separator: An air separator in the suction line can help remove any entrained air from the system, thus reducing the chance of cavitation.

4. Install a venturi: A venturi installed in the suction line can help create an area of low pressure, which can reduce the chance of cavitation.

5. Install a priming valve: A primer valve can help reduce the suction head and thus reduce the chance of cavitation.

6. Install a vacuum breaker: A vacuum breaker can be used to reduce the pressure in the suction line, thus reducing the chance of cavitation.

7. Improve the suction piping: Improving the suction piping, such as using larger pipes, can reduce the chance of cavitation.

8. Inspect the pump and suction line: Inspecting the pump and suction line for any signs of wear or damage can help reduce the chance of cavitation.

These pictures display a fire pump set consisting of diesel engine fire pump and jockey pump along with a control panel and accessories.

Application Scope:

Equipment for small buildings, warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

Using Instruction:

Altitude ≤ 1000m;

Ambient temperature: +5 °C ~ +40 °C;

Relative humidity: <= 90%.