Diesel engine fire pump set is an advanced and reliable fire fighting equipment

The EEJ Fire Pump System is an innovative solution designed to enhance fire safety in various settings. With exceptional performance and efficiency, the EEJ Fire Pump System delivers high pressure and large flow capacity, enabling rapid and effective fire suppression. Its intelligent features, including real-time monitoring and remote control capabilities, contribute to the system’s reliability and ease of operation. Overall, the EEJ Fire Pump System is a reliable choice for safeguarding lives and properties, making it an ideal fire protection solution for commercial buildings, industrial facilities, and residential areas.

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

Fire Pump Set Components :
Electric pump:kinds of end suction pump, split case pump, multistage pump. made of cast iron, stainless steel. Impeller can be bronze.
Diesel pump:Flow is the same with electric pump. It connects the pump set with High elastic coupling or universal joint. It also includes water tank, oil tank, fans, control screen etc.
Jockey pump:horizontal or vertical, small flow, head is higher than electric or diesel pump
Control panel:control the pumps automatically with overload, overcurrent protection

Diesel engine fire pump is a new type of fire-fighting product that made strictly according to the national standard GB6245 and NFPA 20 fire pump performance requirements and testing methods, this series have wide head, flow range, can fully meet various occasions fire water supply in the warehouse, docks and airports, petroleum chemical industry, power plant, liquefied gas station, textile and other industrial and mining enterprises.

Fire pump system is made of Electric Pump + Diesel Engine Pump+Jockey Pump+Accessories

Operation: 1 Duty(electric pump ) + 1 stand by(diesel engine pump ) + 1 Jockey fire pump

Capacity: 100GPM, 150GPM, 200GPM, 300GPM, 400GPM, 500GPM, 750GPM, 1000GPM, 1250GPM…GPM with Pressure 4Bar, 5bar, 6Bar, 10Bar, 15Bar… Bar.

The current use of fire pumps is still relatively important. As the name suggests, fire pumps are pumps used for fire protection. The fire pumps we use now are all imported from abroad. Its performance mainly includes three aspects, sealing, no leakage, and corrosion resistance. Because of the particularity of its use, its requirements are relatively strict in terms of material selection and production. Considering many aspects, the performance and technical conditions of the fire pump meet the requirements of the “Fire Pump Performance and Test Methods” standard.

The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations. With its lightweight and portable design, coupled with versatile functionality, the EDJ Diesel Engine Fire Pump System is suitable for various scenarios. Whether you are part of a fire department or an industrial enterprise, the EDJ Diesel Engine Fire Pump System is your indispensable rescue partner.

1. Application Scope
Equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.
2. Using Instruction
Altitude ≤ 1000m;
Ambient temperature: +5 °C ~ +40 °C;
Relative humidity: <= 90%.

The EDJ Fire Pump Set includes diesel engine pumps, electric pumps and jockey pumps.
In various fields, our products find applications in large hotels, hospitals, schools, office buildings, supermarkets, commercial residences, subway stations, train stations, airports, various transportation tunnels, petrochemical plants, thermal power plants,oil storage tanks, large warehouses, industrial and mining enterprises, seawater injection, etc.

Pump Casing: The pump casing is the outer shell that encloses the internal components of the fire pump. It is designed to withstand high pressures and is usually made of durable materials such as cast iron or stainless steel.

Fire pump refers to a clean water pump used for fire water supply, and a single water pump with a treatment medium temperature lower than 80 degrees and non-corrosive. The pump unit is a joint operation of multiple fire pumps to ensure the quantity and stability of water supply. The electric fire pump set adopts multiple fire pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption. The main components of the electric motor fire pump set are the motor and the pump body. The subdivision of the pump body is the pump casing, impeller, pump shaft, bearing, coupling, sealing form, water pipe, etc. The specific fire pump model is determined according to the environment and performance requirements. At the same time According to the material quotation required by the customer, accurate selection is conducive to on-site use and reduces failure problems.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min
The DJ Fire Pump Set is a combination system consisting of a diesel engine pump and a jockey pump, designed for fire safety in the construction and industrial sectors. This system utilizes the powerful power output of the diesel engine pump, ensuring reliable operation even in the event of a power outage.

Many people buy fire pumps for the first time and don’t know how to choose a fire pump. They know very little about fire pumps and don’t know how to choose. So today, on the issue of fire pump selection, here is a explanation for everyone to help you better choose a more competitive fire pump.

The fire pump set is composed of electric pump + diesel pump + jockey pump. It is a set of 750gpm@90m pump set, which is manufactured in strict accordance with the NFPA20 standard.
The fire pump adopts XA pump, the product combines the advantages of similar products at home and abroad, and adopts the excellent hydraulic model design. Therefore, its excellent hydraulic performance and structural characteristics ensure that users can effectively reduce the operating cost of the pump in various applications. The fire pump group of this group is not affected by the mains. When the electric pump fails, the diesel pump will automatically start to operate.

The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations. Types of pumps used for fire service include: End Suction Pump,  Split Case Pump, Vertical Inline Pump and Vertical Turbine Pump.

1. Electric motor driven pump, can use single stage pump, horizontal split case pump, end suction pump,multistage pump.
2.Diesel engine pump, with capacity and head equal to electric pump, with fuel tank, water tank, fan,control box.
3. Jockey pump, horizontal or vertical, capacity will be small, but head should be higher than electric and diesel engine pump.
4. Control panel: Auto Control of electric pump, diesel engine pump and Jockey Pump with overload, over current protection.

Whether you are part of a fire department, an industrial facility, a construction site, or a rural area, the EDJ Diesel Engine Fire Pump System is an indispensable firefighting asset. Count on the EDJ Fire Pump System to provide reliable support and swift containment of fires!

What kind of terrain to choose what kind of water pump

This problem, in short, is the selection of water pumps. The following are the applicable way for you to choose water pumps from zjbetter. I hope they can help you choose water pumps and help you better. Choose the water pump that suits your design.
1. Confirm the use terrain
First understand the terrain in which the outfit is used, including temperature, moisture, air pressure, air cattiness, dustproof and leakproof conditions, and the position of dangerous areas.
2. Confirm operating conditions
Refers to the liquid face pressure( absolute) on the suction side of the liquid, the liquid face pressure on the discharge side, intermittent or nonstop work, fixed or mobile position, and the convenience of installation and conservation.
3. Confirm the nature of the medium
Medium temperature, viscosity, density, impregnated vapor pressure, solid flyspeck periphery and content, gas content, cattiness, volatility, trap, toxin.
4. elect the material of the pump bathe corridor
According to the physical and chemical parcels of the pumped medium above, the material of the inflow- passing corridor is determined.
5. Determine performance parameters
The performance parameters of the water pump can be determined by computation, analogy, test and other styles.
6. Determine the installation type
The installation of the channel is determined by the layout of the channel and the installation point, and there are direct connection, perpendicular and other types.
8. Determine the number of pumps
In general, spare pumps, especially fire pumps, are set up, and the number of pumps is named according to different situations.

Fire pumps work by drawing water from a water source (such as a storage tank or a dedicated water supply) and then increasing the pressure to deliver water through the fire sprinkler system or hoses. They are typically powered by electric motors or diesel engines.

1. Electric fire pump: various end suction pumps and split pumps.
2. jockey pump: vertical, small flow, higher lift than electric or diesel pumps.
3. Control panel: Automatically control the water pump with overload and overcurrent protection.
4. Accessories: suction pipe, discharge pipe with flange, battery, gate valve, check valve, flexible expansion joint, pressure switch, pressure gauge, base, etc.

The small DJ fire pump set is composed of a diesel engine pump and a stabilized pump. The small flow pump set is generally used in low buildings.It is suitable for fire-fighting occasions such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas, textiles, ships, oil tankers, etc.

This fire fighting equipment is an important part of building fire protection system. Its
routine inspection and daily maintenance are very important for each dual-power. If the fire
pump or booster pressure stabilizer pump in the dual power system fails, the fire accident
will lead to great losses of buildings and so on. It is the responsibility of the enterprise to
ensure that all equipment is regularly maintained and inspected, including the maintenance
and maintenance of all fire fighting systems

Using Instruction
Altitude: ≤ 1000m;
Ambient temperature: +5 °C ~ +40 °C;
Relative humidity: <= 90%.

Understanding the appropriate testing frequency for fire pumps is crucial for compliance with safety standards and ensuring system reliability. This article explores the recommended testing schedules, including monthly, quarterly, and annual tests. It also underscores the need for more frequent testing in specific situations, such as critical facilities or harsh operating environments.

Fire pump room design is vital for system functionality, accessibility, and safety. This article delves into the key considerations when designing a fire pump room, such as space requirements, ventilation, and fire suppression. It emphasizes the importance of a well-designed pump room to ensure optimal pump performance and personnel safety.

The model of fire pump unit consists of six parts: pump characteristics, pump unit characteristic code, main parameters, use characteristic code, auxiliary characteristic code and enterprise custom code
The fire pump with power source is generally composed of a group of fire pump, power source, control cabinet and auxiliary devices.
The diesel electric hybrid fire pump unit can complete the work in various environments more safely, comprehensively and efficiently. In case of power failure, the electric pump will stop working and the diesel pump will start within ten seconds to continue working instead of the electric pump.

There are many types of fire pumps to deal with more fire water environments. Fire pumps are used in buildings, factories, storage and other places, and the performance requirements and quality requirements are different. The commonly used types of fire pumps are vertical electric fire pumps, diesel fire pumps, horizontal single-stage fire pumps, vertical single-stage/multiple Level fire pumps and horizontal double-suction fire pumps, etc., the specific head, flow and power are selected according to different projects.

Fire pump system is made of Diesel+Jockey pump
1. Diesel engine pump, can use single stage pump, horizontal split case pump, end suction pump, multistage pump, material can be cast iron, stainless steel, and bronze impeller , with fuel tank, water tank，fan, control box
2. Jockey pump, horizontal or vertical, capacity will be small, but head should be higher than electric and diesel engine pump
Jockey material casing: cast iron, shaft and impeller: SS304

The EDJ fire pump group is composed of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the stabilized pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

A multistage pump is a multistage centrifugal pump in which two or more impellers are installed on the pump shaft and connected in series to work together. A horizontal multistage centrifugal pump refers to a multistage pump in which centrifugal pumps with two or more impellers are combined. The multistage centrifugal pump is characterized by high efficiency and energy saving, wide range of use, special purpose, stable operation, long service life, convenient installation and maintenance, etc.

EDJ-ISW fire-fighting pump set is a fire-fighting water supply equipment with dual drive of electric power and diesel engine designed and manufactured by Better Technology Group Co., Ltd. according to the standard of <>, and has obtained 3CF certification. There are many models of Beide fire pump sets, which can be customized according to needs.

The fire-fighting water provided by most fire-fighting water sources needs to be pressurized by fire-fighting water pumps to meet the requirements for water pressure and water volume during fire-fighting, which is an important part of fire-fighting. In daily use, we often encounter fire pumps vibrating or making abnormal noises. What is the problem?
1. The installation is not firm and the fasteners are loos

2. Wear between impeller and seal ring

3. Improper installation of pump body and pump shaft

4. Cavitation causes abnormal sound inside the pump