How do fire pumps support fire protection in theaters and performance venues?

Yes, fire pump rooms must meet certain requirements, including adequate ventilation, drainage, lighting, and accessibility. The room should also be protected from flooding and fire and have a reliable power supply.

The National Fire Protection Association (NFPA) has established standards and guidelines governing the installation and maintenance of fire pumps. NFPA 20, the Standard for the Installation of Stationary Pumps for Fire Protection, provides comprehensive requirements for fire pump design, installation, testing, and maintenance.

Compliance with NFPA 20 standards is essential to ensure that fire pump systems are installed and maintained in a manner that meets nationally recognized safety practices. These standards help ensure the reliability and effectiveness of fire pumps in protecting lives and property during fire emergencies.

All accessories of ED small fire-fighting complete water supply equipment are assembled according to the standard (NFPA20). Its configuration depends on the customer’s needs, or the number of pumps and the type of electric and diesel pumps. ED small fire pump sets are usually equipped with two pumps, a main pump (electric centrifugal pump) and a backup pump (diesel centrifugal pump). The choice of electric motor and diesel engine depends on the reliability level of the system.

Prior to installation, fire sprinkler systems are hydraulically calculated to ensure adequate water flow and that the system can reliably suppress a fire until fire crews arrive. When it is determined that there is insufficient flow from a municipal supply for the system to function properly, a fire pump is installed. The fire pump activates when the sprinkler system pressure falls below a certain threshold as a result of sprinkler head operation. To maintain the required operating pressure of the sprinkler system, the fire pump draws additional water from the municipal water supply or on-site storage tanks. Due to the size of piping systems and pressure loss, fire pumps are frequently required in high rise construction and large area buildings.

UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Key Considerations:
High-rise buildings require adequate water pressure to reach upper floors efficiently.
NFPA 14 recommends a minimum residual pressure of 100 psi (6.9 bar) at the highest standpipe outlet.
Fire pump discharge pressure should be calculated based on:
Elevation height (0.433 psi per foot of elevation).
Friction loss in pipes, fittings, and valves.
Minimum operating pressure required at hose connections.

Learn how to prevent fire pump cavitation with proper suction design, pump sizing, and maintenance tips to protect your system and ensure reliable performance.

1. Fire hydrant fire extinguishing system and automatic sprinkler fire extinguishing system in fixed fire protection systems of various enterprises and institutions, engineering construction, high-rise buildings, etc.
2. High-rise building partition fire water system, fire and living, production and shared water supply system and buildings, municipal, industrial and mining, boiler water supply and other occasions.
3. Fire-fighting system pressurized water supply, water supply plants, irrigation, drainage pumping stations, power stations, air-conditioning circulating water, industrial water supply systems, fire-fighting systems, shipping industry, oil refining systems, mining and other liquid transportation.
4. Fire water supply and emergency water supply in docks, warehouses, airports, petroleum, chemical, power plants, liquefied gas, textiles, ships, oil tankers, etc.

1. Ability to provide a steady and reliable flow of water: Fire pumps are designed to provide a steady and reliable flow of water to the fire suppression system. This ensures that the fire is extinguished quickly and without any damage to the property.

2. High-Pressure Output: Fire pumps can provide a high-pressure output to ensure that the water is able to reach further distances and at higher pressures than would be achievable by a standard water system. This is important in controlling and extinguishing fires, as it allows the water to reach all areas of the fire.

3. Emergency Operation: Fire pumps are designed to be able to operate in the event of a power outage. This ensures that the fire suppression system can still be operational in the event of a power failure. This is especially important in commercial buildings and other areas where power outages can occur.

4. Automatic Activation: Fire pumps are designed to automatically activate in the event of a fire. This ensures that the fire suppression system can be activated quickly and without any manual intervention. This is especially important in the event of a large fire, as it ensures that the system is already in operation before the fire department arrives.

5. Low Maintenance: Fire pumps are designed to be low maintenance, requiring only regular inspections and maintenance to ensure that they are working correctly. This ensures that the fire suppression system is always ready for use and that it can be relied upon in the event of a fire.

When selecting a firefighting pump, factors such as the intended application (e.g., residential, industrial, wildland), required flow rate and pressure, available power source (e.g., gasoline, diesel, electric), portability, and budget should all be taken into account. Consulting with experts or fire safety professionals can help ensure you choose the right pump for your needs.

The fire booster pump is designed to increase the flow and pressure rate of the water supply coming into the fire system. This is accomplished by drawing water from a municipality main, tank, or hydrant, and then boosting the pressure rate of the water supply with an electric motor and pump. The adjusting of the pressure rate is accomplished by changing the speed of the electric motor that is powering the pump, which in turn changes the amount of water being pushed through the system.

The fire pump is mainly a kind of pump equipment used for fire emergency, and its function is to transport the water source to the fire scene for fire extinguishing. In life, fire pumps are widely used in various buildings, such as factories, docks, warehouses, ports and other places, and are important equipment for fire emergency.

In challenging environments such as high temperatures, freezing cold, high humidity, or dusty industrial zones, conventional fire equipment often fails to perform reliably. To meet these demanding conditions, we proudly present our Heavy-Duty Diesel Fire Pump Set — a robust solution specifically designed for extreme working scenarios.

Powered by an industrial-grade diesel engine, this unit offers strong torque and excellent start-stop response. It is equipped with a high-flow, high-head end suction or split-case fire pump, delivering steady water pressure even under the most adverse conditions. Built on a solid steel base, the unit is resistant to vibration and corrosion, making it ideal for long-term continuous operation.

Its intelligent control system supports automatic start/stop, remote monitoring, and alarm linkage, ensuring safe and efficient performance even in unattended situations. Optional features include dual power switching, automatic battery charging, and preheating for rapid startup and stable operation.

Whether deployed in petrochemical plants, power stations, mining fields, or offshore platforms, this heavy-duty diesel fire pump set stands as a reliable line of defense for life and property.

Fire sprinkler systems are an important part of life safety in buildings. International building codes allow some exceptions when buildings are “fully watered”, such as reducing rated spacing, reducing hydrant flow requirements, increasing exit travel distance, and increasing building height and area. These exceptions are allowed so that in the event of a fire, the sprinkler system will suppress the fire enough that occupants can safely evacuate the building and that the spread of the fire is contained before the fire department has fully arrived to extinguish it.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Factors include the building size, height, occupancy type, local fire codes, water supply source, and the required water flow and pressure. A thorough hydraulic analysis is typically performed to determine the appropriate pump size and type.

The dual power fire pump is composed of a fire water pump, a double shaft extension motor and a diesel engine. One end of the output shaft of the double shaft extension motor is connected with the input shaft of the fire pump, and the other end of the output shaft of the double shaft extension motor is One end of a clutch is connected, and the other end of the clutch is connected with the output shaft of the diesel engine. The fire water pump, the double-shaft extension motor, the clutch and the diesel engine are all fixed on the base. The double shaft extension motor, the clutch and the diesel engine are respectively electrically connected with a control circuit through an action driving circuit. With dual-power fire pumps, there is no need to configure a second fire pump, which reduces floor space and saves manufacturing costs.

Our company’s fire pump equipment is widely used in state agencies, various residences, pressurized pump stations, hotels, schools, hospitals, etc. due to its outstanding features such as environmental protection, energy saving, and safety.

Diesel engine fire pump, as a fixed fire extinguishing equipment, has been widely used in fire diversion, especially in the case of no power supply or abnormal power supply and other emergencies, other diesel engines can also be equipped as power engines according to the needs of users.​​

Fire pumps are specifically designed for firefighting purposes. While some may have other applications, their primary function is to provide water at the required pressure for fire protection systems.

Setting up the fire pump control system correctly is crucial to ensure the pump operates efficiently and reliably during emergencies. Here are the general steps to set up the fire pump control

Learn how to choose the ideal fire pump for your building by evaluating system demand, pump type, NFPA 20 compliance, and water supply conditions.

Advanced integrated control diesel fire pump with auto start-stop, remote monitoring, and multiple safety alarms—ideal for factories, warehouses, petrochemical, and energy sectors to ensure uninterrupted industrial fire protection.

The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations. With its lightweight and portable design, coupled with versatile functionality, the EDJ Diesel Engine Fire Pump System is suitable for various scenarios. Whether you are part of a fire department or an industrial enterprise, the EDJ Diesel Engine Fire Pump System is your indispensable rescue partner.

Flow: 30-9000 GPM
Head: 3-20Bar
Speed: 740-2900r/min
Material: HT200, SS304, Bronze
The EJ Dual Power Fire Pump System is an innovative and reliable fire protection solution. Combining an electric pump for robust water pressure and flow with a top-quality jockey pump for stable pressure maintenance, this system ensures efficient and timely water supply during fires. With advanced automation, remote monitoring, and energy-saving features, the EJ Dual Power Fire Pump System is a trusted choice for commercial, industrial, and residential applications.

The fire-fighting dual-power water supply equipment is suitable for all kinds of emergency backup pump places. The dual-power fire pump is suitable for various fire-fighting pressurization and pressure-stabilizing pump occasions; various villas, residential areas and other fire-fighting systems; industrial and civil building fire-fighting systems; suitable for various oil depots, oil product loading and unloading terminals, logistics parks and other fire protection levels Demanding places.

Fire-fighting package set water supply equipment manufactured by is referred to as
“dual-power”, “Fire Pump Set” hereinafter as “dual-power”, “Fixed Fire Pump Installation
Standard” and “Standard for the Fixed Fire Pump Installation Standard” of the
American Fire Protection Association in accordance with China Standard GB27898.5-2011
Fixed Fire-fighting Water Supply Equipment Part 5 “Fire Dual-power Installation of
Stationary Pumps for Fire Protection -2016 design and manufacture. Comply with the
latest Chinese national standard CCCF certification requirements and obtain the
certificate. Dual power is one of the reliable products in fire fighting water supply equipment.

Firefighting pumps play a crucial role in effective fire suppression by providing firefighters with a reliable source of pressurized water or firefighting agents. These pumps enable firefighters to quickly and efficiently deliver water to the fire scene, allowing them to control and extinguish fires more effectively while minimizing property damage and protecting lives.

Flow testing is a critical aspect of fire pump maintenance and compliance with safety standards. This article explores the fundamentals of fire pump flow testing, including procedures, equipment, and the significance of accurate testing to verify system performance. It discusses the relationship between flow testing and water distribution and highlights the need for regular testing to ensure optimal fire protection.