The electric fire pump is mainly used for pressurization and water delivery of fire system pipelines

The various types of fire pump sets produced by our company mainly have the following characteristics: reliable performance, compact structure, convenient operation and maintenance, wide range of pressure and flow selection, and are highly praised by users. At the same time, our company can equip diesel engine cooling water preheating and engine oil pre-lubricating devices according to user needs, so that the fire pump set is always on standby to meet the emergency fire fighting equipment and improve the life of the fire pump set. The product is based on GB6245-1998 “Fire Pump Performance Requirements and Experimental Methods”.

Due to its stable performance and high frequency of use, diesel engine fire pumps can be matched with various domestic and foreign brands of diesel engines according to user needs, and can be selected according to the required head, flow, power and fire pump material requirements to ensure stable use by customers. Diesel engine fire pumps operate automatically It is simple, adopts good hydraulic design and structural design, and has high operating efficiency. It is very suitable for applications in warehouses, docks, power plants, textiles and other enterprises.

Proper maintenance of diesel engine fire pumps, especially preventive maintenance, is simple and economical maintenance, so it is the key to prolong service life and reduce operating costs. Daily maintenance can be carried out according to the following steps to check the amount of fuel in the fuel tank – observe the amount of fuel stored in the fuel tank, and fill it up as needed.

The EEJ Fire Pump System is an innovative solution designed to enhance fire safety in various settings. With exceptional performance and efficiency, the EEJ Fire Pump System delivers high pressure and large flow capacity, enabling rapid and effective fire suppression.Overall, the EEJ Fire Pump System is a reliable choice for safeguarding lives and properties, making it an ideal fire protection solution for commercial buildings, industrial facilities, and residential areas.

Horizontal fire pump has significant advantages such as high efficiency, low operating noise, good cavitation resistance, reasonable structure and long service life. , long-distance water supply, heating, bathroom, boiler cold and warm water circulation pressurization, air conditioning refrigeration system water supply and equipment matching and other occasions.

The fire pump can be installed in multiple ways according to the on-site use conditions. And depending on the flow and head requirements, the required flow and head are increased in parallel and series. The bearing adopts low-noise closed bearing, which has been injected with grease before leaving the factory, which can ensure continuous operation for more than two years, and the components have high concentricity. The pump impeller has good performance. Dynamic balance, no vibration in operation, and improved use environment. The pump shaft seal is a mechanical seal, which solves the serious leakage of conventional centrifugal pump packing, increases the service life, and ensures that the operating site is clean and tidy.

Ignite a new level of fire protection with the Outdoor Fire Pump Set. This versatile and reliable pump set is designed to enhance fire safety in various applications. From powering fire hydrants and stabilizing sprinkler systems to safeguarding residential areas, industrial buildings, and high-risk environments, the Outdoor Fire Pump Set delivers optimal performance and unmatched reliability. Elevate your fire safety standards with this powerful solution and gain peace of mind knowing that your property and lives are protected. Choose the Outdoor Fire Pump Set and experience the ultimate fire protection solution.

1.Flow: 50-5000GPM
2.Head: 3-20Bar
3.Speed: 740-2900r/min
4.Power: Electric pump: 1.5-710 kw, Jockey pump: 0.55-160kw
The EEJ Fire Pump System is an innovative solution designed to enhance fire safety in various settings. With exceptional performance and efficiency, the EEJ Fire Pump System delivers high pressure and large flow capacity, enabling rapid and effective fire suppression.Overall, the EEJ Fire Pump System is a reliable choice for safeguarding lives and properties, making it an ideal fire protection solution for commercial buildings, industrial facilities, and residential areas.

Learn how to properly test your fire pump to comply with NFPA 25 and ensure system reliability.

ZJBetter provide three types of fire pump system, such as diesel engine fire pump set, electric driven fire pump set, EDJ fire pump set.

Electric fire pumps are used in various water environments, not only to meet the general water supply but also to be a good helper for fire-fighting water. The electric fire pump is manufactured with good structure and workmanship. It has a wide range of performance, and is easy to use and operate for a long time. The motor fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

Yes, firefighting pumps are often used in conjunction with water tanks, lakes, rivers, or other water sources to ensure a constant and adequate water supply during firefighting operations. Portable water tanks or drafting equipment can be employed to access water from non-traditional sources when necessary.

This series of diesel fire-fighting pump sets has a wide range of head and flow, which can fully meet the fire-fighting water supply in various occasions of warehouses, docks, airports, petrochemicals, power plants, liquefied gas stations, textiles and other industrial and mining enterprises.

This fully automatic constant-pressure electric fire pump set is specifically engineered for fire protection systems in high-rise buildings. It features intelligent control, high energy efficiency, and stable pressure output. The system consists of a main pump, jockey pump, control cabinet, pressure tank, and associated valves and piping. It supports automatic start-stop operation, real-time pressure monitoring, and automatic fault alarms, ensuring continuous and reliable firefighting water supply.

With a compact, modular design, the unit is easy to install and commission, making it ideal for high-rise residential buildings, commercial complexes, and office towers. The system operates smoothly and responds quickly, ensuring rapid activation in case of emergencies, providing strong protection for both lives and property.

1. High power capacity: Fire pump control cabinets are designed to provide a higher power capacity, allowing the system to handle larger loads.

2. Easy installation: Fire pump control cabinets are designed to be easy to install and configure, allowing the pump to be installed quickly and efficiently.

3. Protection: Fire pump control cabinets are designed to provide protection to the electrical components from moisture and other environmental factors.

4. Monitoring: Fire pump control cabinets are equipped with monitoring systems to monitor the performance of the system and alert the user if any issues arise.

5. Alarm system: Fire pump control cabinets are equipped with an alarm system that can alert the user if the system fails or if the pressure drops to a dangerous level.

6. Cost-effective: Fire pump control cabinets are designed to be cost-effective and provide the necessary protection and performance for a facility.

This fire pump features an outstanding energy-saving hydraulic design, which not only significantly reduces operational energy consumption but also ensures continuous high-performance water flow during emergencies. Its internal structure is meticulously optimized to minimize fluid resistance while enhancing flow and pressure output, resulting in lower energy usage and improved efficiency. Whether used in industrial settings or commercial buildings, this fire pump delivers stable and powerful hydraulic support while reducing operational costs, providing an uncompromising safeguard for fire safety.

1. Connection form

The vertical water pump is connected with the motor by the coupling, which needs to be aligned regularly; the perpendicular water pump is superimposed and connected from the bottom to the top, and the perpendicular water pump is generally called the channel pump.

2. Installation form

Compared with perpendicular water pumps, perpendicular water pumps are easier to install. The vertical pump set is handed with a base, and perfection adaptation is needed after installation.

3. conservation difficulty

Since the perpendicular water pump is composed of upper and lower layers, the conservation of the perpendicular water pump is more delicate. For illustration, to repair the impeller, it’s necessary to remove all the corridor above the impeller before repairing; while the vertical water pump is fairly easy. For illustration, the IS type pump can perform impeller conservation by removing the bay pipe.

4. bottom space

It can be seen from the appearance that the vertical water pump has a base due to its vertical structure, so it occupies a large area.

The product is EJ fire pump set. The EJ fire pump set has one electric pump and one jockey pump. The electric pump in the picture is XA pump. XA series horizontal single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly horizontal centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps.

Small fire pump set—With small flow, small lift and diesel electric matching, it is suitable for small buildings, small in size, small in floor area, and can save a lot of space and installation. It is the first choice of many foreign customers.Better Technology Group is committed to the production, testing, packaging, delivery and technical development of fire pumps. It researches pump products in many aspects and brings high-quality and high-performance fire pump products to many countries.

Proper design and installation of suction and discharge piping are vital for the efficient operation of a fire pump system. The suction piping connects the fire pump to the water supply source, while the discharge piping carries water from the pump to the fire protection devices.

Key considerations for these piping systems include the sizing, material selection, and routing. Proper sizing ensures that water can be drawn from the source at the required rate, and the piping material must be compatible with the water and the environment. Piping routing should minimize friction losses and ensure that the system operates without cavitation or other issues.

UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Common causes include power supply issues, mechanical failures, improper maintenance, and incorrect installation. Regular testing and adherence to maintenance schedules are crucial to prevent failures.

Large public events, such as festivals, outdoor concerts, and sporting events, often occur in temporary or open-air settings that lack the built-in fire safety infrastructure of permanent venues. Fire pumps are crucial for providing water pressure to portable fire suppression systems, such as temporary sprinklers, hydrants, or foam systems. Jockey pumps help maintain consistent pressure, ensuring that the system is ready to respond quickly to any fire emergencies. In these temporary setups, fire pumps may need to draw water from nearby reservoirs, lakes, or portable water tanks, requiring flexibility and adaptability in their design. Since large crowds can complicate evacuation efforts, fire pumps play a vital role in controlling fires quickly and limiting their spread, minimizing risks to attendees. Event organizers must coordinate with fire safety professionals to ensure that fire pumps are properly set up, tested, and maintained throughout the duration of the event. Furthermore, regular safety drills and the presence of trained staff on-site help ensure that fire protection systems, including pumps, are ready to function effectively in emergency situations.

Fire pump professional production manufacturers, complete products, manufacturers direct sales, after-sales worry, pump quality is good, durable products.

When facing the fire risks in modern buildings and industrial facilities, firefighting efficiency and reliability are the foremost considerations. Electric fire pumps are the ideal solution for tackling fire challenges in complex environments, offering high efficiency, stability, and smart control systems. Whether in high-rise buildings, industrial parks, chemical plants, or power facilities, electric fire pumps ensure exceptional performance.

Firstly, electric fire pumps are equipped with high-performance electric motors, ensuring the stable operation of the pump through intelligent control systems. In the event of a fire, the system responds quickly and activates the pump, providing a steady water flow to extinguish the fire. Especially in complex environments such as narrow spaces, high-temperature settings, or areas requiring highly precise control, the electric fire pump continues to operate efficiently, ensuring the successful execution of firefighting tasks.

Moreover, the smart control system of the electric fire pump continuously monitors the pump’s operational status, conducts self-diagnostics, and adjusts pressure and flow, ensuring no performance degradation during firefighting operations. Its compact design allows it to fit into spaces with limited room while maintaining top-notch performance.

With the increasing emphasis on environmental protection and energy efficiency, the low energy consumption and high performance of electric fire pumps make them increasingly popular in the market, playing a critical role in optimizing firefighting efficiency.

EDJ series fire pump set consists of Electric pump + Diesel pump + Jockey pump and all accessories.
The pressure switch and control cabinet can automatically turn on/off three pumps-the electric pump and jockey pump operate when there is electricity and the diesel pump activates when the power cuts.
Flow Capacity Range:50-5000 GPM
Pressure Range:4-14 Bar
Power Range：4-325 KW

Diesel engine fire pump is a common fire fighting equipment, especially suitable for use in places without electricity supply. The diesel engine fire pump uses a diesel engine as a power source to convert the work of the pump into hydraulic power to achieve a certain flow and pressure. It is mainly used in building fire protection, engineering fire protection, water source fire extinguishing and other fields.

Fire pumps typically draw water from a reliable source such as a dedicated water tank, municipal water supply, or open water source. It’s essential to ensure that the water supply is sufficient and free from contaminants.

Diesel and electric fire pumps are the two primary types of fire pumps used in fire protection systems, each with its own advantages and considerations. Diesel fire pumps are powered by internal combustion engines and are typically used in locations where a reliable electric power supply is not available or where redundancy is needed to ensure continuous operation during a power outage. Diesel pumps are known for their reliability and ability to operate independently of the electric grid, but they require regular maintenance of the engine and fuel system, including fuel storage and periodic testing.

As a fixed fire-fighting equipment, the diesel engine fire-fighting pump set has been widely used in fire-fighting diversion, especially for fire-fighting water supply in unexpected situations such as no power supply or abnormal power supply (mains power).

Discuss the importance of regular fire pump testing to ensure system readiness in case of an emergency. Describe weekly churn tests and annual flow tests, explaining how these tests verify the pump’s performance, check for potential issues, and maintain compliance with NFPA and insurance requirements. Include a checklist to make testing straightforward and encourage record-keeping.