There are many models of fire pumps in Better factory

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Fire pump refers to a clean water pump used for fire water supply, and a single water pump with a non-corrosive treatment medium temperature below 80°C. The pump unit is a joint operation of multiple fire pumps to ensure the quantity and stability of water supply. The electric motor fire pump set adopts multiple fire water pumps powered by electric motors. The general fire water supply environment is equipped with one electric and one diesel fire pump as the reserve water pump to ensure sufficient emergency water consumption.

Flow-1000GPM
Head-106psi
Power-100HP=75KW
EJ fire pump is composed of electric pump + jockey pump
Those pictures display OTS series electric motor pump. OTS double suction split-case centrifugal pump has a wide range of performance, with the ability for a variety of uses.

Spectrum range: fire pump can use a single-stage end suction pump,a combination of multistage single-suction pumps, single-stage double-suction pumps and other kinds of pumps, pump or more kinds of parallel flow, wide pressure range.
Automatically. when the engine fire pump receives a valid signal fire, remote control start signal when the unit will start automatically; when the fire pump motor supply failure or lack of signal phase, the unit will automatically standby. Diesel fire pump start 10s, if not start running, stop 10s, and then restart. The unit will automaticaly repeat three times.
Alarm System: repeatedly failed to start alarm, low diesel engine oil pressure alarm, ultra-high temperature alarm diesel engine, diesel engine speed alarm, low battery alarm, charging failure alarm, an alarm indicating a lack of fuel.
kinds of ways to start signal fire started, manually start or remote start.

Diesel engine fire pumps can be used for fire water supply in warehouses, docks, airports and other places. We usually choose the appropriate diesel engine fire pump model application according to the head, flow rate, power, medium properties, required materials, etc. provided by the user. In order to avoid mistakes, the loss caused by the installation environment will also be considered comprehensively to ensure stable and reliable efficiency.

The National Fire Protection Association (NFPA) has established standards and guidelines governing the installation and maintenance of fire pumps. NFPA 20, the Standard for the Installation of Stationary Pumps for Fire Protection, provides comprehensive requirements for fire pump design, installation, testing, and maintenance.

Compliance with NFPA 20 standards is essential to ensure that fire pump systems are installed and maintained in a manner that meets nationally recognized safety practices. These standards help ensure the reliability and effectiveness of fire pumps in protecting lives and property during fire emergencies.

The pump will start to work when the pressure in the fire extinguishing system pipeline of EDJ small Fire Fighting water supply equipment drops suddenly. The first triggered pump is the jockey pump(pressure stabili-zation pump). The pressure stabilization pipeline of the jockey pump is allowed to start frequently within a certain range. In general, the pressure of the jockey pump is 1-1.5 bar higher than that of the main pump.

The fire pump’s pump casing should be regularly inspected for signs of corrosion, warping, and damage. The casing should also be visually inspected for leakage, and all fittings should be tested regularly to ensure they are properly sealed. All gaskets and seals should be checked for wear and replaced when needed. The impeller should be routinely checked to make sure it is free of debris and that all blades are in good condition. Any abnormal sound or vibration should be investigated immediately.

The diesel engine fire pump has the advantages of long head and wide application range, and can meet the fire water supply in multiple places such as warehouses, docks, airports, power plants, liquefied gas stations, and petrochemical industries. This type of diesel engine fire pump set has good starting performance, compact structure, humanized design, convenient maintenance, simple and convenient use, and high degree of automation. It is a very good fire pump.

Diesel engine fire pumps are often used for emergency water supply in high-rise buildings, water companies, steel plants, wineries, chemical plants, hotels, hospitals, and other large-scale projects. The diesel emergency water supply pump set is suitable for unattended emergency water supply systems. The product has the characteristics of high automation, superior performance, complete protection functions, reasonable structure, simple installation, and high cost performance. pipe network pressure.

Using Instruction:
Altitude ¡Ü 1000m;
Ambient temperature: +5 ¡ãC ~ +40 ¡ãC;
Relative humidity: <= 90%. Application Scope: Equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

50gpm 8bar ED fire pump product process

The next-generation diesel-driven fire pump system combines smart control, efficient water delivery, and modular design. Ideal for high-risk fire protection scenarios, it complies with NFPA20 standards, supporting intelligent firefighting infrastructure.

The fire pump set is not installed with water inlet pipe according to customer requirements. The fire pump adopts ISW pump, which has the advantages of convenient installation and simple maintenance.The pump set consists of electric pump, diesel engine pump and jockey pump.The three pumps automatically start and stop, and they can run even if the power is cut off, without being affected by the mains.

In today’s world of increasingly extreme weather and complex installation conditions, the enclosed fire pump set offers a robust and reliable solution for modern fire protection systems. With its fully enclosed cabinet design, this unit provides exceptional protection against dust, rain, and corrosion, while also delivering outstanding impact resistance. It is well-suited for tough environments such as construction sites, oil fields, ports, and underground parking facilities.

The system integrates a diesel engine, fire pump, control panel, and fuel tank within a weather-resistant metal housing. This design not only saves valuable space but also eliminates the need for a traditional pump room, reducing construction and maintenance costs significantly. Its louvered ventilation and multi-layer insulation effectively control heat and noise, ensuring quiet and efficient operation even under pressure.

Whether facing scorching heat, coastal humidity, or dusty desert climates, the enclosed diesel fire pump set remains a reliable safeguard—ready to perform at any moment and in any condition.

The EDJ fire pump set is composed of a fire pump, a dual-shaft extension motor and a diesel engine. One end of the output shaft of the dual-shaft extension motor is connected to the input shaft of the fire pump, and the other end of the output shaft of the dual-shaft extension motor is connected to the input shaft of the fire pump. One end of a clutch is connected, and the other end of the clutch is connected with the output shaft of the diesel engine. The fire water pump, the double-shaft extension motor, the clutch and the diesel engine are all fixed on the base. The double-shaft extension motor, the clutch and the diesel engine are respectively electrically connected with a control circuit through the action driving circuit. With dual-power fire pump, there is no need to configure a second fire pump, reducing floor space and manufacturing costs.

Better technology specializes in the production of fire pump, novel product design, excellent performance, fast water flow, high head, complete varieties; The company independent research and development of fire pump production more than 15 years, and won a number of certification certificates.

Fire pumps are water intake equipment for fire facilities. At least one or two fire pumps are equipped. Our commonly used fire pumps are electric fire pumps and diesel engine fire pumps. The difference between them is that electric fire pumps require power system supply. In the event of a power failure, the diesel engine fire pump can start at any time to compensate for the original position of the electric fire pump.

When facing the fire risks in modern buildings and industrial facilities, firefighting efficiency and reliability are the foremost considerations. Electric fire pumps are the ideal solution for tackling fire challenges in complex environments, offering high efficiency, stability, and smart control systems. Whether in high-rise buildings, industrial parks, chemical plants, or power facilities, electric fire pumps ensure exceptional performance.

Firstly, electric fire pumps are equipped with high-performance electric motors, ensuring the stable operation of the pump through intelligent control systems. In the event of a fire, the system responds quickly and activates the pump, providing a steady water flow to extinguish the fire. Especially in complex environments such as narrow spaces, high-temperature settings, or areas requiring highly precise control, the electric fire pump continues to operate efficiently, ensuring the successful execution of firefighting tasks.

Moreover, the smart control system of the electric fire pump continuously monitors the pump’s operational status, conducts self-diagnostics, and adjusts pressure and flow, ensuring no performance degradation during firefighting operations. Its compact design allows it to fit into spaces with limited room while maintaining top-notch performance.

With the increasing emphasis on environmental protection and energy efficiency, the low energy consumption and high performance of electric fire pumps make them increasingly popular in the market, playing a critical role in optimizing firefighting efficiency.

The Max Power-2000kw-10KV Split Case EDJ Fire Pump Set is a cutting-edge fire protection solution that combines power, efficiency, and reliability. With a remarkable power output of 2000 kilowatts and a 10-kilovolt system, this fire pump set delivers unmatched water flow capacity and electrical performance. Its advanced Split Case design ensures easy maintenance and optimal performance, making it suitable for a variety of applications. Engineered to exceed industry standards, the Max Power-2000kw-10KV Split Case EDJ Fire Pump Set offers dependable fire protection in the most demanding environments. Invest in this state-of-the-art solution and experience the pinnacle of fire safety technology.

Fire pump equipment has the characteristics of mature technology, high degree of automation, protection function, reasonable structure and easy installation. At the same time, in order to meet the different needs of users and reasonable investment, the products are divided into fire pump, industrial emergency pump, agricultural pump and other application series, can be linked with the electric fire pump switch use.

EDJ Multistage Fire Pump Set is electric fire pump+diesel fire pump+jockey pump.It can meet 120GPM~3000GPM with 100m~660m.

Fire pumps are necessary to maintain adequate water pressure for firefighting, especially in high-rise buildings, large industrial facilities, or areas with insufficient water supply.

The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations. With its lightweight and portable design, coupled with versatile functionality, the EDJ Diesel Engine Fire Pump System is suitable for various scenarios. Whether you are part of a fire department or an industrial enterprise, the EDJ Diesel Engine Fire Pump System is your indispensable rescue partner.

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

Fire pumps should be tested regularly to ensure their proper functioning. Monthly tests for a short duration and an annual full-load test are common practices. Regular testing helps identify and address any issues promptly.

UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

In critical moments, a stable water supply is the lifeline of fire safety. This dual-drive fire pump system, equipped with both a diesel engine and an electric motor, ensures uninterrupted water pressure even during power outages or emergencies. With its compact structure and space-saving design, the unit offers quick modular installation and is ideal for high-rise buildings, underground parking garages, industrial facilities, and petrochemical storage areas where system reliability is paramount.

The system features an intelligent control panel with automatic power source switching, one-click start/stop operation, and real-time status monitoring—minimizing the need for manual intervention. Even under extreme conditions, this system delivers fast response and consistent performance, making it an essential part of any modern fire protection setup.

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.