600gpm @ 35m EDJ fire pump set

1. Perform regular maintenance on the fire pump as recommended by the pump manufacturer.

2. Visually inspect the fire pump periodically and repair any damages or leaks detected.

3. Make sure that the fire pump is adequately cooled and lubricated as specified by the manufacturer.

4. Test the fire pump regularly with a suitable hydrostatic pressure test to ensure that it is functioning as designed.

5. Replace the seals of the pump regularly as necessary.

6. Ensure all electrical connections are proper and secure to avoid short circuits or other electrical problems.

7. Keep the fire pump area clean and free from dirt, dust, and debris.

Diesel fire pumps are ideal for applications where a separate pump room already exists or where the pump room is located on an exterior wall. Facilities using diesel fire pumps include warehouses, aircraft hangars and industrial facilities. Since they have a larger footprint than electric fire pumps, they are not suitable for installations where space is small. Unlike diesel pumps, electric fire pumps can be located inside buildings. Office buildings and apartments are often equipped with electric fire pumps. In addition, upper floors sometimes install an additional electric fire pump above ground or basement to increase water pressure.

This dual power fire pump system integrates a vertical electric pump with a high-performance diesel engine-driven pump, designed to ensure a highly reliable water supply for critical fire protection applications. With a compact and well-structured design, the unit operates seamlessly under both normal power conditions and power outages, guaranteeing uninterrupted water delivery to firefighting systems.

The electric pump offers high efficiency and low noise, suitable for routine operation, while the diesel pump provides emergency backup in the event of power failure. Equipped with a smart control panel, the system supports automatic start/stop, fault alarms, and real-time monitoring, ensuring ease of use and operational safety.

Widely used in commercial buildings, high-rise apartments, industrial facilities, and warehouses, this system is a trusted water supply solution for modern firefighting infrastructure.

Electric fire pumps are used in various water environments, not only to meet the general water supply but also to be a good helper for fire-fighting water. The electric fire pump is manufactured with good structure and workmanship. It has a wide range of performance, and is easy to use and operate for a long time. The electric fire pump is aimed at various fire water environments, so the selection should also be based on the actual demand environment, performance parameters, etc.

The EJ (Electric pump + Jockey pump) Dual Power Fire Pump System is an innovative and reliable fire protection solution. Combining an electric pump for robust water pressure and flow with a top-quality jockey pump for stable pressure maintenance, this system ensures efficient and timely water supply during fires. With advanced automation, remote monitoring, and energy-saving features, the EJ Dual Power Fire Pump System is a trusted choice for commercial, industrial, and residential applications.

Prior to installation, fire sprinkler systems are hydraulically calculated to ensure adequate water flow and that the system can reliably suppress a fire until fire crews arrive. When it is determined that there is insufficient flow from a municipal supply for the system to function properly, a fire pump is installed. The fire pump activates when the sprinkler system pressure falls below a certain threshold as a result of sprinkler head operation. To maintain the required operating pressure of the sprinkler system, the fire pump draws additional water from the municipal water supply or on-site storage tanks. Due to the size of piping systems and pressure loss, fire pumps are frequently required in high rise construction and large area buildings.

1. Visually inspect the fire pump for any signs of damage or leaks.

2. Check the oil level and add oil as necessary.

3. Check the suction and discharge valves for proper operation.

4. Check the inlet and discharge pressure gauges for accuracy.

5. Check for any foreign objects in the suction and discharge piping.

6. Inspect the fire pump for any signs of corrosion or wear.

7. Lubricate all bearings and drive components.

8. Check the electrical connections for any signs of corrosion or wear.

9. Clean the exterior of the fire pump and its components with a damp cloth.

10. Test the fire pump to ensure its proper operation.

High quality and low price fire pump, factory direct sales, professional production and sales team, actively and properly solve customer feedback after-sales problems.

Discover what shutoff head means in fire pump systems and why it’s crucial for safe and efficient operation.

Diesel engine fire pumps are mainly used for emergency fire fighting on ships. At the same time, it is also suitable for industrial and mining enterprises, port terminals, warehouses and freight yards and other places. Diesel engine fire pump, as a fixed fire extinguishing equipment, has been widely used in fire diversion, especially in emergencies such as no power supply or abnormal power supply, it can also be equipped with other diesel engines as power engines according to the needs of users.

In the fire fighting pipeline pump, according to the different installation methods can be divided into vertical fire pumps and horizontal fire pumps, many people have questions about these two common pumps, what is the difference between the two? Shanghai Xizhiquan will explain the difference between horizontal and vertical pumps.

Obviously, different installation methods take up different space. Vertical pipeline pumps are installed vertically, covering a relatively small area, and vertical fire pumps do not require a foundation, while horizontal fire pumps need to be equipped with a base.

According to the different structures of the two pumps, it can be concluded that there is also a certain difference in the ease of maintenance of the two types of fire fighting pipeline pumps. The impeller of the vertical fire pump needs to be dismantled from top to bottom, which makes maintenance more difficult; the horizontal fire pump only needs to have the inlet pipe removed so that the impeller can be overhauled, which is relatively simple.

Due to the different inlet and outlet pipe directions, the pipeline connection between vertical and horizontal is also different. As the vertical pump is a bottom-up structure, while the horizontal fire pump is longitudinally arranged on the base, so the motor of the vertical pump and the pump body are connected in the form of sub-mouth connection, while the horizontal pump needs to use couplings to connect with the motor, and the horizontal pipeline pump needs to be corrected regularly.

Translated with www.DeepL.com/Translator (free version)

The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations. With its lightweight and portable design, coupled with versatile functionality, the EDJ Diesel Engine Fire Pump System is suitable for various scenarios. Whether you are part of a fire department or an industrial enterprise, the EDJ Diesel Engine Fire Pump System is your indispensable rescue partner.

Fire pump as the name implies, fire pump, according to different classification is divided into different kinds of it is fully sealed, no leakage, corrosion resistance, widely used in environmental protection, water treatment, fire departments, is used to pump all kinds of liquid equipment.

The fire pump set is composed of a diesel fire pump and an electric fire pump. The pump set is a horizontal, single-suction, single-stage centrifugal pump. It has the characteristics of high efficiency, wide range of performance, safe and stable operation, low noise, long life, convenient installation and maintenance, etc. It is used to transport clear water or other liquids whose physical and chemical properties are similar to water. It can also be used to transport hot water, oil, corrosive or abrasive media by changing the material of the pump’s flow parts, sealing form and adding a cooling system.

Fire pumps are primarily designed for structural fire protection, and their use in wildfire prevention is limited. However, water pumps and other firefighting equipment may be employed for vegetation fire control in specific situations.

DJ series fire pump set consists of Diesel pump + Jockey pump and all accessories.
The pressure switch and control cabinet can automatically turn on/off three pumps-the electric pump and jockey pump operate when there is electricity and the diesel pump activates when the power cuts.

If the fire pump is corroded, it should be inspected by a qualified professional. Depending on the extent of the corrosion, the pump may need to be repaired or replaced. The professional may also need to inspect the entire system for any other potential issues. In some cases, a fire pump may need to be replaced if the corrosion is severe and cannot be repaired.

EEJ Fire pump set
Flow:100gpm
Head:17bar
This pump uses horizontal multistage pump.
We manufacture in strict accordance with customer requirements. All products will be tested before leaving the factory to ensure that there are no problems. The design meets the national standard of general packaging, meets customer needs, and standard handling and transportation.

Application Scope
Equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

Using Instruction
Altitude: ≤ 1000m;
Ambient temperature: +5 °C ~ +40 °C;
Relative humidity: <= 90%.

Explore the benefits of ZJ-Better Fire Pump Control Systems. Learn how our intelligent, automated control systems enhance firefighting efficiency with real-time monitoring, fault diagnostics, self-repair capabilities, and energy-saving features for reliable, high-performance fire protection.

The ED Dual-Power Fire Pump System combines electric and diesel engine pumps to ensure uninterrupted fire protection and a reliable water supply. In the event of power outages or electrical failures, the diesel engine pump seamlessly takes over, guaranteeing continuous operation of the fire protection system. This dual-power configuration offers both reliability and flexibility, providing comprehensive coverage for fire safety needs. With smart controls and automatic switching mechanisms, the transition between electric and diesel engine pumps is seamless, minimizing system downtime. Equipped with advanced safety features, including monitoring and alarm systems, real-time status updates allow for prompt action in case of any irregularities.

This fire pump is built with high-strength materials and precision manufacturing to ensure stable operation under high-pressure conditions. Its advanced hydraulic design minimizes energy loss, enhancing pump efficiency and pressure output. Additionally, it features a high-performance sealing system that effectively prevents leaks, extending the equipment’s lifespan. Moreover, the pump unit is equipped with an intelligent monitoring system that continuously tracks operational status and adjusts parameters in real time, ensuring a stable and reliable water supply when it matters most.

The EDJ （Diesel Pump:XA, Electric Pump:XA）Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations. With its lightweight and portable design, coupled with versatile functionality, the EDJ Diesel Engine Fire Pump System is suitable for various scenarios. Whether you are part of a fire department or an industrial enterprise, the EDJ Diesel Engine Fire Pump System is your indispensable rescue partner.

1. Electric Motor Fire Pumps
2. Diesel Engine Fire Pumps
3. Portable Fire Pumps
4. Turbine Fire Pumps
5. Horizontal Split Case Fire Pumps
6. Vertical In-Line Fire Pumps
7. Vertical Turbine Fire Pumps
8. Jockey Fire Pumps

Jockey pumps should be inspected regularly, with routine checks typically performed monthly. The inspection includes checking pressure settings, verifying proper operation, and inspecting for any leaks or damage. Ensuring that the jockey pump functions correctly helps maintain system pressure and prevent unnecessary wear on the fire pump.

Advantages of OTS fire pump set:
1. Advanced hydraulic model, high efficiency and wide performance range.
2. Horizontal structure, easy installation and maintenance, small footprint.
3. Small vibration and low noise. Hydraulic balance of axial force is adopted to make the pump run smoothly, safely and reliably.
4. The inlet and outlet of the pump are on the same horizontal axis, which is convenient for pipeline connection and extremely convenient for loading and unloading.

Eliminating fire pump faults promptly is crucial to ensure the fire pump’s reliability and effectiveness during emergency situations. Here are some measures to address fire pump faults effectively:

In modern fire protection systems, rapid response to fire incidents is crucial for safeguarding life and property. The Pressure Stabilization and Dual-Function Pump System integrates powerful pressure regulation with dual power sources to ensure that the fire protection system quickly responds and maintains a continuous, stable water supply during emergencies.

This pump system is designed with two power sources—an electric motor and a diesel engine. When the primary power source fails, the diesel engine automatically starts, ensuring uninterrupted operation of the fire protection system even during power outages. Its pressure stabilization system automatically adjusts pressure during operation, ensuring stable water flow for fire suppression and preventing water interruptions due to insufficient or fluctuating pressure, ultimately improving firefighting efficiency.

The intelligent control system further enhances the efficiency of the pump system, allowing users to monitor the system’s status in real-time through a touch panel. The system is easy to operate, and any malfunction is quickly detected and alarms are triggered, activating backup systems to effectively prevent emergency issues caused by system failure.

This pump unit is ideal for applications in high-rise buildings, industrial zones, storage facilities, and other locations with high reliability requirements for fire protection, ensuring that the fire pump can be immediately activated and continue to supply water in any emergency.

One way to choose a diesel generator set as a backup power source for fire fighting backup power is because in fire fighting, two power supplies are required, which can be two power plants and two transformers, or one mains and one diesel generator set. Meet the requirements of fire backup power.

This fire pump features an advanced hydraulic design that optimizes flow channel structure, effectively reducing hydraulic losses and improving operational efficiency. The high-efficiency impeller and precisely optimized fluid dynamics ensure a smoother water flow, minimizing turbulence and energy loss for better energy conversion.

Additionally, the pump is equipped with a high-performance sealing system that minimizes leakage, ensuring long-term stable operation while reducing maintenance costs. The pump body is made of corrosion-resistant materials, extending its lifespan and maintaining high performance even in harsh environments.

In real-world applications, this fire pump is widely used in industrial, commercial, and high-rise building fire protection systems, providing reliable fire suppression when it matters most.