EJ (Electric+ jockey) Fire Pump Set

Diesel engine fire pump is a kind of fire-fighting equipment that we often see and often use in our life. The diesel engine fire pump has the characteristics of good starting performance, strong overload capacity, compact internal structure, convenient maintenance, simple operation and high degree of automation. It is a very reliable fire fighting equipment.

1. Inspect and test the fire pump, piping, valves, and relief valves annually for proper operation and water flow.

2. Make sure the fire pump is in good working condition and that all safety systems are in place and operational.

3. Check the fire pump’s pressure gauge and make sure it’s properly calibrated.

4. Inspect the motor, couplings, and belts for proper alignment and condition.

5. Clean the fire pump’s suction and discharge strainers regularly.

6. Ensure that the fire pump is properly lubricated and that all bearings and seals are in good condition.

7. Test the fire pump with a certified flow test annually.

8. Inspect the fire pump’s control panel and make sure it’s in proper working order.

9. Test the fire pump’s jockey pump and make sure it is operational.

10. Check all electrical connections and wiring for proper operation.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min

The outdoor fire pump set is designed to enhance fire safety in various applications. From powering fire hydrants and stabilizing sprinkler systems to safeguarding residential areas, industrial buildings, and high-risk environments, the Outdoor Fire Pump Set delivers optimal performance and unmatched reliability.

1. The fire pump pump room should be located close to the water source.

2. The location should allow easy access for maintenance and repair.

3. The area should be well-ventilated and protected from extreme weather conditions.

4. The room should be suitable for operation and maintenance of the fire pump system.

5. The pump room should be protected from unauthorized access.

6. The area should not be subject to flooding.

All places need to be equipped with fire-fighting facilities, and fire pumps are necessary water intake equipment for fire-fighting facilities. At least one or two fire pumps are equipped. Our commonly used fire pumps are electric fire pumps and diesel engine fire pumps. The difference between the two is The electric fire pump needs to be supplied by the power system. If the power is cut off, the diesel engine fire pump can be started at any time to make up for the original position of the electric fire pump.

Early detection of fire pump issues is crucial for preventing critical system failures. This article explores the functionalities and benefits of fire pump alarms and monitoring systems in detail. It explains how these systems provide real-time data on the status and performance of fire pumps, enabling early warning of potential problems. By embracing these technologies, facility managers can ensure continuous oversight and timely intervention.

High quality and low price fire pump, factory direct sales, professional production and sales team, actively and properly solve customer feedback after-sales problems.

containerized fire pump system 750gpm with electric fire pump, diesel engine fire pump, jockey pump and controllers for each pump, and these all fitted in the 40″ container.

The Max Power-2000kw-10KV Split Case EDJ Fire Pump Set is a cutting-edge fire protection solution that combines power, efficiency, and reliability. With a remarkable power output of 2000 kilowatts and a 10-kilovolt system, this fire pump set delivers unmatched water flow capacity and electrical performance. Its advanced Split Case design ensures easy maintenance and optimal performance, making it suitable for a variety of applications. Engineered to exceed industry standards, the Max Power-2000kw-10KV Split Case EDJ Fire Pump Set offers dependable fire protection in the most demanding environments. Invest in this state-of-the-art solution and experience the pinnacle of fire safety technology.

EJ fire pump set is a fire water supply equipment composed of an electric pump and a jockey pump designed and manufactured by Better Technology Co., Ltd. according to the <> standard, and has obtained 3CF certification. There are many models of Better dual-power fire pumps, which can be customized according to needs.

1. Make sure the fire pump is regularly inspected and tested according to the manufacturer’s recommendations.

2. Inspect all electrical components and wiring to ensure they are in good working order.

3. Ensure the fire pump is properly lubricated and any worn parts are replaced.

4. Check the suction and discharge valves for proper operation.

5. Inspect the motor and its bearings for signs of wear or damage.

6. Test the fire pump for pressure, flow, and suction.

7. Clean the fire pump, its components, and the surrounding area regularly.

8. Ensure any repairs or maintenance is done by a certified technician.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min
The EDJ Fire Pump Set is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water.

EDJ series fire pump sets are mainly installed in fire trucks, fire extinguishing systems or other fire fighting facilities, and are special pumps used to transport liquids such as water or foam solution.
The fire pump set includes a main pump connected to the electric motor, a backup pump connected to the diesel engine, jockey pump, pressure vessel, controller for manual or automatic operation of the system and standard accessories mounted on the base.

Features of diesel multi-stage pump:
1. Multiple impellers are combined in series, the output pressure is large, so the lift is high.
2. The shaft seal adopts packing seal or mechanical seal, the seal is safe and reliable, the structure is simple, and the maintenance is convenient and quick.
3. The shaft is a fully sealed structure, which ensures no contact with the medium, no rust, and long service life.

1. All personnel must be familiar with the operation manual and the safety regulations of the fire pump before use.

2. When the fire pump is in operation, no one should be allowed to approach the pump or the suction and discharge pipelines.

3. The suction and discharge pipelines should be inspected regularly to ensure that there are no blockages, as blockages can cause the pump to malfunction.

4. The pressure of the pump should be checked regularly to ensure that it is within the range specified by the manufacturer.

5. Before starting the fire pump, all valves in the suction and discharge pipelines must be checked to make sure they are open.

6. All safety devices should be checked regularly to make sure they are in good working condition.

7. The motor should be checked regularly to make sure it is in good working condition.

8. The fuel tank should be checked regularly to make sure it is filled with the correct type and amount of fuel.

9. The temperature of the pump should be checked regularly to make sure it is not too high.

10. If a fault is detected, the pump should be shut down and the fault should be rectified before it is restarted.

The products are packed in wooden cases, which are light in weight, whole core, frosted and formaldehyde free. Shipping remark can be made for free. Good packaging is the quality guarantee during the transportation of products.

1. Electric pump, can use multistage pump, material can be cast iron, stainless steel, and bronze impeller

2. Jockey pump, horizontal or vertical, capacity will be small, but head should be higher than electric and diesel engine pump

Jockey material casing: cast iron ,shaft and impeller SS304

Diesel engine-driven fire pumps are designed and manufactured in accordance with GB “Fire Pumps”. Comply with CCCF certification requirements. The advantage of its product is that when a fire occurs, the power supply fails, and the electric fire pump group cannot be put into use normally, the diesel engine fire pump group can be automatically put into operation to ensure the normal fire fighting. Compared with the electric fire pump set, the second advantage is that it does not need long-term investment in power supply, saving the mains power supply transformer and normal expenses. Diesel engine fire pumps are equipped with various automatic functions to meet customer requirements, ensure long-term normal standby status of the equipment, and put it into fire fighting work at any time. The diesel engine fire pump set is also suitable for various emergency backup pump occasions.

The small DJ fire pump set is composed of a diesel engine pump and a stabilized pump. The small flow pump set is generally used in low buildings.It is suitable for fire-fighting occasions such as warehouses, docks, airports, petrochemicals, power plants, liquefied gas, textiles, ships, oil tankers, etc.

Flow: 25-100gpm
Rated pressure:H＜8bar
Speed: 2950-3550RPM

1.Flow：30-9000 GPM
2.Head： 3-20 Bar
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min
The EDJ Fire Pump Set is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water.

Fire pump package comprises a combination of electric motor driven pump, diesel engine driven and electric motor driven jockey pumps that supply for fire suppression systems.

The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations.With its lightweight and portable design, coupled with versatile functionality, the EDJ Diesel Engine Fire Pump System is suitable for various scenarios. Whether you are part of a fire department or an industrial enterprise, the EDJ Diesel Engine Fire Pump System is your indispensable rescue partner.

Better Technology Co.,Ltd is a professional manufacturer of kinds of fire pump systems. We provide diesel engine fire pump set, motor electric driven fire pump set, EDJ fire pump set. We also have UL, ISO CE Certificates. More information pls contact us.

The fire pump can be installed in multiple ways according to the on-site use conditions. And depending on the flow and head requirements, the required flow and head are increased in parallel and series. The bearing adopts low-noise closed bearing, which has been injected with grease before leaving the factory, which can ensure continuous operation for more than two years, and the components have high concentricity. The pump impeller has good performance. Dynamic balance, no vibration in operation, and improved use environment. The pump shaft seal is a mechanical seal, which solves the serious leakage of conventional centrifugal pump packing, increases the service life, and ensures that the operating site is clean and tidy.

The parts that may cause friction when the pump rotates are all made of wear-resistant, corrosion-resistant and high-anti-seize material combinations to ensure reliable operation, reduce noise, and avoid rust water, blocking spray and other fire-fighting devices, extending service life and after shutdown. Rust bite phenomenon.

Fire pumps are pumps used in fire protection. They are divided into different types according to different classification methods. They have the characteristics of full sealing, no leakage and corrosion resistance. They are widely used in environmental protection, water treatment, fire protection and other departments. Liquid is an ideal pump and fire-fighting system for creating a leak-free, pollution-free civilized workshop and civilized factory. The pump types are similar, but the head and flow are different. The selection basis of the fire pump should be considered according to the process flow, water supply and drainage requirements, and other five aspects.

The function of the diesel fire pump is very powerful. We can set the control time during use, for example: preheating in advance, pre-lubrication or timing start. The use of high technology has made some complicated and time-consuming things easier. The preheating setting in advance has greatly reduced the preparation time for rescue, allowing firefighters to rescue at the first time. In the face of disasters, time is money, time It is life.

With the continuous development of society, people have higher requirements for the quality of life, and the safety of diesel engine fire pumps is more important. All places need to be equipped with fire-fighting facilities, and fire pumps are water intake equipment for fire-fighting facilities. The fire pumps we commonly use are electric fire pumps and diesel engine fire pumps. The difference between them is that electric fire pumps need power system supply. In case of power failure, the diesel engine fire pump can be started at any time to make up for the original position of the electric fire pump.

1. Visually inspect the fire pump for any signs of damage or leaks.

2. Check the oil level and add oil as necessary.

3. Check the suction and discharge valves for proper operation.

4. Check the inlet and discharge pressure gauges for accuracy.

5. Check for any foreign objects in the suction and discharge piping.

6. Inspect the fire pump for any signs of corrosion or wear.

7. Lubricate all bearings and drive components.

8. Check the electrical connections for any signs of corrosion or wear.

9. Clean the exterior of the fire pump and its components with a damp cloth.

10. Test the fire pump to ensure its proper operation.

The EE Pump Set is designed according to the customer’s specifications which is including 2 electric pumps and 1 control panel.