Home » Fire Pump Set » EDJ fire pump set

EDJ fire pump set

product description:
EDJ fire pump set consists of diesel engine fire pump, electric pump set and stabilized pump to form an automatic fire water supply system
1. Electric pump, single-stage pump, horizontal split pump, end-suction pump, multi-stage pump, the material is cast iron or stainless steel, and the impeller can be made of copper impeller
2. Diesel engine pump, the flow rate is the same as that of the electric pump. The diesel engine is connected by a highly elastic coupling or a universal joint to form a fire pump set. The set also includes fuel tanks, water tanks, fans, control panels and other components.
3. Stabilizer pump, horizontal or vertical, small flow, higher lift than electric pumps and diesel pumps
4. Control cabinet, automatic control of electric pump, diesel engine pump and stabilized pump, with overload, overcurrent protection
5. The accessories include check valve, gate valve, air pressure tank (0.6mpa, 1.0mpa, 1.6mpa), pressure gauge, pressure sensor, common inlet and outlet pipeline, soft joint, flange and common base.

Rated 5/5 based on 267 customer reviews
Share:
Content

product description:
EDJ fire pump set consists of diesel engine fire pump, electric pump set and stabilized pump to form an automatic fire water supply system
1. Electric pump, single-stage pump, horizontal split pump, end-suction pump, multi-stage pump, the material is cast iron or stainless steel, and the impeller can be made of copper impeller
2. Diesel engine pump, the flow rate is the same as that of the electric pump. The diesel engine is connected by a highly elastic coupling or a universal joint to form a fire pump set. The set also includes fuel tanks, water tanks, fans, control panels and other components.
3. Stabilizer pump, horizontal or vertical, small flow, higher lift than electric pumps and diesel pumps
4. Control cabinet, automatic control of electric pump, diesel engine pump and stabilized pump, with overload, overcurrent protection
5. The accessories include check valve, gate valve, air pressure tank (0.6mpa, 1.0mpa, 1.6mpa), pressure gauge, pressure sensor, common inlet and outlet pipeline, soft joint, flange and common base.

Inquiry


    More Fire Pump Set

    There are numerous ways to maintain fire pumps and water pumps. The following styles are more effective. You can use them for reference
    System 1 The installation of the pump set should be accurate and dependable, and there should be no egregious vibration duringoperation.However, or the bearing is hot to the touch( the temperature is advanced than 60 °C) and the water seepage in the seal of the pump shaft is further than 60 drops per nanosecond, the cause must be set up out and the fault should be excluded in time, If the pump makes abnormal noise when pumping water.
    the
    system 2 Screws that are squinched daily, similar as packing gland screws, irrigation entrapments,etc., should be disassembled with a suitable wrench and a reasonable necklace. You can put some slicking oil painting on it or wipe it regularly with an oil painting cloth to help rust; if the water drain screw isn’t used constantly, it’s easy to rust, so after buying a new water pump, you should first wind the water drain draw, and apply some machine oil painting and white lead oil painting on the screw thread, Change the new oil painting two or three times a time in the future.
    the
    System 3 If the pump is waxed with machine oil painting, the slicking oil painting should be replaced once a month; if it’s waxed with adulation, it should be replaced every six months. It should be noted that the water pump uses calcium- grounded grease, and the motor uses sodium- grounded grease, and they shouldn’t be used inaptly. Because sodium- grounded grease is hydrophilic, it’ll emulsify into froth and dissipate when it encounters water on the pump, while calcium- grounded grease is hysterical of high temperature, so it’s easy to melt when the temperature rises when used on a motor.

    system 4 Don’t pump water with too important beach, so as to avoid unseasonable wear and tear of the impeller, mouth ring and shaft, and try to help water deficit operation. Running without water will damage the water seal, and the water pump is prone to water leakage or indeed no water.
    System 5 After the irrigation and drainage season is over, the water pump should be precisely gutted and auditedimmediately.However, they should be repaired or replaced in time, and the corridor that should be waxed should be filled with suitable oil painting; Stylish stored in a dry place, If any damaged or misshaped corridor are set up to be unworkable.