Should the fire pump be set to automatic or manual?

The small EJ fire pump set is suitable for low buildings. The fire pump set consists of an ISW electric pump and a CDL jockey pump. The ISW pump is easy to install and maintain, no need to disassemble or move the piping system, just lift the pump to connect the flat nut to take out all the rotors part. The impeller is directly mounted on the main shaft of the motor, with a short axial dimension and a compact structure, which can calibrate the rounding of the pump to effectively generate radial and axial loads, thereby ensuring smooth operation, vibration and low noise of the pump.

A fire pump is a critical component of a fire sprinkler system. It is designed to increase water pressure and flow for firefighting. It works by drawing water from a reliable source and boosting its pressure to ensure effective water distribution through sprinklers or hoses.

Diesel engine fire pump can not be short of a good helper, the rapid development of social science and technology, it has been widely used in the society. The use of diesel engine fire pump is very wide, for the fire has played a very important role, with it can also solve a lot of problems we can not solve before, to bring great help to firefighters, save time and effort is out of efficiency.

The product is EJ fire pump set. The EJ fire pump set has one electric pump and one jockey pump. The electric pump in the picture is XA pump. XA series horizontal single-stage single-suction centrifugal pump is a new generation of energy saving, environment friendly horizontal centrifugal pump researched and developed by our company, which absorbs advanced technology of similar products abroad and adopts domestic general performance parameters of centrifugal pumps

There are many types of fire pumps to deal with more fire water environments. Fire pumps are used in buildings, factories, storage and other places, and the performance requirements and quality requirements are different. The commonly used types of fire pumps are vertical electric fire pumps, diesel fire pumps, horizontal single-stage fire pumps, vertical single-stage/multiple Level fire pumps and horizontal double-suction fire pumps, etc., the specific head, flow and power are selected according to different projects.

1. Knowledge of Fire Pump Design and Components: Fire pumps are complex pieces of machinery, and technicians must be familiar with its components, including the electric motor, reservoir, impeller, and check valves.

2. Electrical Troubleshooting: Electric motor control centers, circuit breakers, and other electrical components must be understood by technicians in order to properly maintain fire pumps.

3. Instructions for Proper Maintenance: Technicians must be able to read and understand manufacturer’s instructions for inspection and required maintenance, such as oil and filter changes.

4. Record Keeping: Accurate records of maintenance must be kept in order to ensure that fire pumps are in peak working condition.

5. Diagnose and Repair of Pump Malfunctions: Technicians must have the ability to diagnose and fix common pump problems such as bearing wear, corrosion, and bearing failure.

6. Troubleshoot Accessories and Peripherals: Technicians should be familiar with fire pump accessories such as pressure switches, gauges, and houseline piping.

7. Handle Power Sources: Technicians must have the knowledge to recognize safe levels of power sources, such as AC or DC, to ensure fire pump operations.

8. Pressure Testing: Technicians must understand and follow safety procedures when pressure testing fire pumps and their related houselines.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min
The EDJ Diesel Engine Fire Pump System is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water. The system operates independently, ensuring its reliability even in challenging situations.

The fire pump is mainly a kind of pump equipment used for fire emergency, and its function is to transport the water source to the fire scene for fire extinguishing. In life, fire pumps are widely used in various buildings, such as factories, docks, warehouses, ports and other places, and are important equipment for fire emergency.

ED small fire pump set (referred to as ED small fire complete set of water supply equipment) refers to a highly integrated electromechanical system with a flow rate of less than 100GPM and composed of electric centrifugal pumps, multi-stage centrifugal pumps (booster pump sets), diesel engine centrifugal pumps, pressure limiting protection Device (safety valve), valve fittings, control system, pressure sensor system, waterless protection device, backflow preventer, soft joint, bypass pipeline, common base, filter, etc. It is a fire-fighting water supply equipment that continuously supplies water to the fire-fighting pipe network at a preset pressure.

EDJ fire pump is an important part of the electric fire pump, diesel engine fire pump and regulator pump, the electric fire pump can’t normal put into use, the diesel engine fire pump set automatically in normal operation to ensure that the fire extinguishing, diesel engine fire pump group configuration of various automatic functions, meet the requirements of standard, ensure the long-term normal standby, ready for the fire fighting work.

Fire pump system is made of Electric Pump + Diesel Engine Pump+Jockey Pump+Accessories

Operation: 1 Duty(electric pump ) + 1 stand by(diesel engine pump ) + 1 Jockey fire pump

Capacity: 100GPM, 150GPM, 200GPM, 300GPM, 400GPM, 500GPM, 750GPM, 1000GPM, 1250GPM…GPM with Pressure 4Bar, 5bar, 6Bar, 10Bar, 15Bar… Bar.

The main reason to have a fire pump is to work with the fire protection system in case the water supply does not have sufficient pressure. High structures or large warehouses that carry large amounts of water require the help of a fire pump. It increases the pressure of the water flowing into the fire suppression system, allowing the system to release the maximum amount of water while extinguishing the fire.

Better main types of fire pump, a professional production and sales team, quality strictly control, fire pump design in line with the national standard of general packaging, in line with customer needs.

This diesel fire pump set consist of diesel fire pump, jockey pump and accessories. It is used for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

The National Fire Protection Association (NFPA) has established standards and guidelines governing the installation and maintenance of fire pumps. NFPA 20, the Standard for the Installation of Stationary Pumps for Fire Protection, provides comprehensive requirements for fire pump design, installation, testing, and maintenance.

Compliance with NFPA 20 standards is essential to ensure that fire pump systems are installed and maintained in a manner that meets nationally recognized safety practices. These standards help ensure the reliability and effectiveness of fire pumps in protecting lives and property during fire emergencies.

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

Diesel engine fire pumps can be widely used in environmental protection, water treatment and fire protection departments to transport various liquids by using their own advantages.

Diesel engine fire pump unit is a kind of pump equipment that is widely used in fire protection, and it is more suitable for mobile work in fire pumps. In fact, it is driven by a diesel engine connected to the pump head of the fire pump. Compared with motor drive, it can be used in the field, mines, and places lacking power supply. It is also called a diesel engine pump or a diesel engine fire pump unit.

All accessories of EJ small fire complete water supply equipment are assembled according to the standard (NFPA20). Its configuration depends on the customer’s needs, or the number of pumps and the type of electric pump. EJ small fire pump group consists of electric pump and jockey pump. EJ small fire-fighting complete set of water supply equipment has reasonable layout, firm installation, reliable connection, compact structure, neatness and convenient maintenance.

The EE fire pump is composed of two electric pumps. According to the customer’s requirements, there is no jockey pump and control cabinet. It is a small fire pump set with competitive price. The fire pump set is being tested at the Better factory. , make sure the product is free of any problems.

Flow: 30-9000 GPM
Head: 3-20Bar
Speed: 740-2900r/min
Material: HT200, SS304, Bronze
The EJ Dual Power Fire Pump System is an innovative and reliable fire protection solution. Combining an electric pump for robust water pressure and flow with a top-quality jockey pump for stable pressure maintenance, this system ensures efficient and timely water supply during fires. With advanced automation, remote monitoring, and energy-saving features, the EJ Dual Power Fire Pump System is a trusted choice for commercial, industrial, and residential applications.

Diesel engine fire pump is a new type of fire-fighting product that made strictly according to the national standard GB6245 and NFPA 20 fire pump performance requirements and testing methods, this series have wide head, flow range, can fully meet various occasions fire water supply in the warehouse, docks and airports, petroleum chemical industry, power plant, liquefied gas station, textile and other industrial and mining enterprises.

Fire pump package comprises a combination of electric motor driven pump, diesel engine driven and electric motor driven jockey pumps that supply for fire suppression systems.

Functional description of fire pump control system, which is composed of electric motor fire pump, diesel engine fire pump, common chassis, water outlet pipeline and various valves. The operation of the unit is operated by hand. The diesel engine fire pump is equipped with a fuel tank with a running capacity of 6 hours. The electric fire pump set has a starter cabinet and a manual button box, which is convenient and feasible to operate. In addition to the entire structure of the manual control unit, the automatic motor fire pump unit and diesel engine fire pump unit also have an automatic control panel mainly composed of PLC. Automatic control panel function The automatic control panel receives the fire alarm signal.

XBC diesel engine fire pump is a fire protection product independently developed and produced according to the market demand and usage of domestic and international fire pumps. The use of this series of products, long operating life, good product reliability, is currently the domestic and international market fire engineering, sprinkler facilities fire pump products. The fire equipment quality supervision and testing center has been approved by the fire department according to the performance requirements and experimental methods of GB6245-2006 “fire pump”.

Zhejiang Better Technology Group Co., Ltd. mainly produces various industrial pumps, electric motor fire pumps, diesel engine fire pumps, fire-fighting special water supply equipment, fire-fighting dual-power water supply equipment, general-purpose fire-fighting gas top pressure water supply equipment, fire pump control cabinets, fire-fighting frequency conversion automatic Inspection cabinets, fire protection dual power supply cabinets, submersible sewage pumps, pipeline pumps, chemical pumps, oil pumps, slurry pumps, vacuum pumps and complete sets of vacuum equipment, non-negative pressure water supply equipment, frequency conversion constant pressure water supply equipment and water tanks of various materials, fire protection, Domestic pump room control cabinets, etc., products are widely used in agriculture, machinery, chemical industry, papermaking, medicine, food, sugar, electronics, metallurgy, ceramics, water diversion, printing and dyeing, building materials and other fields.

Now the general diesel engine fire pump set is powered by imported or domestic Cummins, Wuxi Power Engine Factory and other diesel engines produced by large-scale key enterprises in the internal combustion engine industry at home and abroad, through highly elastic couplings or diaphragm couplings produced by professional manufacturers. The engine is directly connected with the water pump, and the power of the diesel engine can reach 880KW. It can be equipped with water pumps of different lifts and flow rates for customers to choose and use according to different needs.

The EJ (Electric pump + Jockey pump) Dual Power Fire Pump System is an innovative and reliable fire protection solution. Combining an electric pump for robust water pressure and flow with a top-quality jockey pump for stable pressure maintenance, this system ensures efficient and timely water supply during fires. With advanced automation, remote monitoring, and energy-saving features, the EJ Dual Power Fire Pump System is a trusted choice for commercial, industrial, and residential applications.

EDJ fire pump set is suitable for any emergency firefighting occasions, such as: firefighting water supply and emergency water supply in warehouses, docks, airports, petrochemicals and other occasions. This product can run in the case of power failure, the product has strong stability and is more reliable, and the jockey pump and pressure vessel can save some electricity and save costs.

The EE Pump Set is designed according to the customer’s specifications which is including 2 electric pumps and 1 control panel.