What’s the difference between a horizontal and a vertical fire pump?

Diesel engine fire pumps can be widely used in environmental protection, water treatment and fire protection departments to transport various liquids by using their own advantages.

1. Electric fire pump: various end suction pumps and split pumps.
2. jockey pump: vertical, small flow, higher lift than electric or diesel pumps.
3. Control panel: Automatically control the water pump with overload and overcurrent protection.
4. Accessories: suction pipe, discharge pipe with flange, battery, gate valve, check valve, flexible expansion joint, pressure switch, pressure gauge, base, etc.

It shows the fire pump set being tested. We have a factory equipped with a testing center. Products will be tested before delivery.

This is a 300gpm@135psi DJ fire pump customized by a customer in Latin America. It consists of a diesel pump + a jockey pump and is equipped with a control cabinet. The pump set is not affected by the mains, and is suitable for any fire emergency situation.

1. The biggest feature of the complete fire pump set is its strong reliability. Even if it is restarted for a long time, it will not bite to death, and it can be restarted normally.
2. The use efficiency is very high. During the use process, there will not be too much noise. The installation form of the fire pump set is very flexible, and it is convenient for maintenance, which can effectively save installation and maintenance costs.??

One way of choosing a diesel generator as a backup power source for fire protection is because in fire protection, two power supplies are required, which can be two power plants and two transformers, or one line of city power and one line of diesel generator set power supply. Meet the requirements of fire backup power.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Scope of application of fire pump:
Equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

Instructions for use of fire pump set:
Altitude: ¡Ü 1000m;
Ambient temperature: +5 ¡ãC ~ +40 ¡ãC;
Relative humidity: <= 90%. Scope of application of fire pump set: Equipment for warehouses, docks, airports, petrochemical, power plants, liquefied gas, textiles, ships, oil tankers and other occasions of a fire service.

·UL Standard
Flow：50-3000 GPM
Head： 5-20 Bar (72.5-290 psi)
Speed：740-2900 r/min
·Non-UL Standard
Flow：30-9000 GPM
Head： 3-20 Bar (40-300 psi)
Speed：740-2900 r/min

Diesel engine fire pump is a kind of fire-fighting equipment that we often see and often use in our life. The diesel engine fire pump has the characteristics of good starting performance, strong overload capacity, compact internal structure, convenient maintenance, simple operation and high degree of automation. It is a very reliable fire fighting equipment.

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

1.Flow：30-9000 GPM
2.Head： 3-20 Bar 40-300 psi
3.Power：Diesel & Electric Pump:1.5-710kw Jockey Pump:0.55-160kw
4.Speed：740-2900 r/min
The EDJ Fire Pump Set is a powerful and reliable firefighting equipment designed for fire suppression and emergency rescue operations. It boasts high-performance capabilities in water extraction and pressure delivery, enabling rapid supply of large volumes of water.

Understanding the appropriate testing frequency for fire pumps is crucial for compliance with safety standards and ensuring system reliability. This article explores the recommended testing schedules, including monthly, quarterly, and annual tests. It also underscores the need for more frequent testing in specific situations, such as critical facilities or harsh operating environments.

All places need to be equipped with fire-fighting facilities, and fire pumps are necessary water intake equipment for fire-fighting facilities. At least one or two fire pumps are equipped. The fire pumps we commonly use are electric fire pumps and diesel engine fire pumps. The difference between the two is The electric fire pump needs to be supplied by the power system. If the power is cut off, the diesel engine fire pump can be started at any time to make up for the original position of the electric fire pump.

This is a set of EDJ fire pump set, which consists of electric pump + diesel pump + jockey pump. The three pumps are automatically started and stopped. When the joceky pump detects that the electric pump cannot operate normally, the diesel engine pump will start automatically. Can also be used, the fire pump set is widely used in various emergency firefighting occasions.

Fire pumps are water intake equipment for fire facilities. At least one or two fire pumps are equipped. Our commonly used fire pumps are electric fire pumps and diesel engine fire pumps. The difference between them is that electric fire pumps require power system supply. In the event of a power failure, the diesel engine fire pump can start at any time to compensate for the original position of the electric fire pump.

There are many types of fire pumps to deal with more fire water environments. Fire pumps are used in buildings, factories, storage and other places, and the performance requirements and quality requirements are different. The commonly used types of fire pumps are vertical electric fire pumps, diesel fire pumps, horizontal single-stage fire pumps, vertical single-stage/multiple Level fire pumps and horizontal double-suction fire pumps, etc., the specific head, flow and power are selected according to different projects.

The equipment is suitable for fire water supply and emergency water supply in various occasions such as warehouses, docks, airports, petroleum, chemical, factories, power plants, liquefied gas, textiles, ships, cruise ships, etc.

Operation of complete fire pump:
1. Design general packaging that meets the national standard, meet customer needs, standard loading and unloading transportation;
2. All products are tested before leaving the factory to ensure that there are no quality problems;
3. Actively and properly solve the after-sales problems reported by customers;
4. The price is reasonable and does not cater to customers with ultra-low prices.

ED Fire pump system is made of Electric pump +Diesel pump
Operation: 1 Duty (electric) + 1 standby (diesel engine)
Capacity: 25, 30, 50, 100, 150, 200, 300, 400, 500, 750, 1000…GPM with pressure 4, 5, 6, 8, 10… Bar.
Pressure vessel 25, 50, 75, 100…liters, pressure will be 0.6mpa, 1.0mpa, 1.6mpa, select according to pump head.

DJ Fire pump package set
Fire pump system is made of Diesel+Jockey pump
The pump model is the OTS series.
Pump: Horizontal split case type pump

The intelligent diesel engine water pump products developed by our factory are equipped with an unattended intelligent system as standard configuration. The product has the characteristics of mature technology, high degree of automation, reasonable structure and easy installation. At the same time, in order to meet the different needs of users and reasonable investment, the products are divided into multiple application series such as fire pumps, industrial emergency pumps, agricultural water pumps, marine water pumps, trailer mobile water pump stations, etc., which can be linked and switched with electric fire pumps.

The model of fire pump unit consists of six parts: pump characteristics, pump unit characteristic code, main parameters, use characteristic code, auxiliary characteristic code and enterprise custom code
The fire pump with power source is generally composed of a group of fire pump, power source, control cabinet and auxiliary devices.
The diesel electric hybrid fire pump unit can complete the work in various environments more safely, comprehensively and efficiently. In case of power failure, the electric pump will stop working and the diesel pump will start within ten seconds to continue working instead of the electric pump.

This is a set of 400gpm@90psi fire pump set, which consists of electric pump + diesel pump + jockey pump. Multiple fire pumps work together to ensure the quantity and stability of water supply. It is a pump set for fire water supply. A diesel fire pump to ensure normal operation in emergency situations.

1. Electric fire pump: various end suction pumps and split pumps.
2. jockey pump: vertical, small flow, higher lift than electric or diesel pumps.
3. Control panel: Automatically control the water pump with overload and overcurrent protection.
4. Accessories: suction pipe, discharge pipe with flange, battery, gate valve, check valve, flexible expansion joint, pressure switch, pressure gauge, base, etc

30 HP EJ 150GPM 150 PSI FIRE PUMP SET DISPATCH
Clients 6 times order us this model for local project

Flow: 120~1500GPM
Head: H＜150m
Speed:2950-3550RPM

Diesel fire pumps are generally used as backup equipment, and will only start automatically when the fire signal arrives, the electric pump fails or the power is cut off. After the ultra-low pressure starting device is equipped, the matching electric water pump control cabinet should also be equipped with an ultra-low pressure starting device, and the pressure difference between the two should be the lower limit. This series of products has a large range of lift and flow, which can fully meet the needs of the dock , warehouse, liquefied gas station, petrochemical, airport, power plant, textile and other industrial and mining enterprises fire water supply.

Residential buildings may have specific regulations governing fire pump installations, depending on factors like building size, occupancy, and local codes. Compliance with these regulations is crucial for ensuring safety.